Expert Answers about Hyundai Azera
- Hidden Trailer Hitch for a 2009 Hyundai Azera
- The hitches available for your 2009 Hyundai Azera are very similar, in that the crosstube of the hitch is on the same level as the actual receiver opening. This tells me that on all of the hitches, you will be able to see the majority of the hitch. However, the side arms of the Curt are not as big as those on the Draw-Tite hitch. The Curt hitch, part # 11080, will be the most inconspicuous.
view full answer... - Are Load Resistors Required to Prevent Hyperflashing with Putco Plasma 1156 LED Lights
- If the bulbs you are replacing on your 2013 Hyundai Azera are incandescent then yes, you will need load resistors to prevent hyperflashing once you install the Putco Plasma 1156 LED Lights # P241156A-360.
For load resistors you would want the LED Light Bulb Load-Resistors # DI34ZR. I attached a pic that shows how they install.
view full answer... - What is Fulton Lock # FSTL0603 Made Of and How To Prevent Theft of Fulton Tire Carrier # FSTC1000301
- Yes , the Fulton Spare Tire Lock, part # FSTL0603, is made of a hardened steel, which is very hard to cut or break.
You can install the Fulton Hi-Mount Spare Tire Carrier, part # FSTC1000301, using a Loctite Threadlocker, part # LT37423. This is a liquid that will lock the nuts to the bolts and prevent anybody from removing them. To disassemble the nuts and bolts will require the use of heat.
Making it time consuming for the thieves to take your item is the best deterrent against theft.
view full answer... - Recommended Tire Chains For 2006 Hyundai Azera With 235/55R17 Tires
- I recommend the Glacier Square-Link Snow Tire Chains # TC1553 which are a confirmed fit for the 235/55/R17 tires that you have on your 2006 Hyundai Azera.
You might also want to check out the Glacier Rubber Adjusters part # PW100. These make it easier to adjust your vehicle snow chains.
You will want to check the owners manual of your vehicle for any restrictions on snow chains for you vehicle.
I have attached a link to a helpful article about snow tire chains you can check out.
view full answer... - Will the Thule T2 Pro XTR Work With Class II Trailer Hitch 1-1/4 Inch Using Adapter
- In order to use the Thule T2 Pro XTR 2 Bike Platform Rack part # TH83JV (which has a 2" shank) with a 1-1/4" receiver tube you will indeed need an adapter, the Brophy Hitch Adapter part # HT5R or part # HTAD. The adapter with rise will be needed for smaller vehicles with less ground clearance whereas the straight adapter can be used for larger trucks and suvs. That said, the use of a hitch adapter will reduce the tongue weight capacity of the trailer hitch by 50% so you will need to keep...
view full answer... - Troubleshooting Dim Turn Signals After Installing Load Resistors
- It sounds like the ground connection may need to be improved. You want to make sure you have a bare metal to metal ground free of corrosion or debris. Load resistors should not have caused them to dim when installed properly. I've attached a photo of the installation for the Putco load resistors # DI34ZR to assist. If you did install this way, let me know and we can continue to troubleshoot.
view full answer... - Using Hitch Adapter for Bike Rack with 2 Inch Shank in Class I Receiver on 2011 Hyundai Azera LE
- There is an adapter, part # HTAD that can be used to convert the 1-1/4 inch receiver of the Class I hitch so that it will be compatible with your Thule rack intended for use in a 2 inch Class III or greater receiver.
Using an adapter can be problematic for a few reasons. First, using the adapter will add another piece in between the rack and the hitch, moving the load further away from the vehicle. The further away from the vehicle the load is placed, a greater amount of leverage is applied...
view full answer... - How to Install Boat Trailer Roller Bunks on a EZ Loader Boat Trailer
- You can simply mount the Boat Trailer Deluxe Roller Bunk, part # DL21740, by just screwing or bolting it in. The mounting brackets, Boat Trailer Roller Bunk Bracket, part # DL21742, are optional in mounting part # DL21740, and are not required.
If you remove your old bunks and installed part # DL21740, the brackets would be needed to attach to the bottom of the bunk where the holes are and there would be no drilling required. This way the bunks would be adjustable to change the height.
If...
view full answer... - Trailer Hitch and Wiring for a 2007 Hyundai Azera
- Any trusted mechanic or RV dealer with a service center could install Draw-Tite trailer hitch # 24771 on your 2007 Hyundai Azera. There really isn't much to maintain after installation. You can periodically check to make sure the bolts are still properly torqued down. And if the hitch gets any corrosion forming on it you will want to clean it off and use some spray paint to keep it from spreading.
You will want to consult the vehicle owners manual and/or Hyundai for the towing capacity...
view full answer...
Go To Results