bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Chrysler Aspen


  • How to Add Reverse Light Circuit to Trailer and Two Tow Vehicles
  • Thank you for all of the details! It sounds like you have one vehicle with a 4-Way, one vehicle with a 4-Way/7-Way combo, and a trailer with a 4-Way. You want to add the reverse light function to your trailer using a junction box setup like what we have with part # HS381-9000 and still be able to use the trailer with both vehicles. I like the idea of adding the junction box as well as taking your trailer 4-Way and integrating it into the box so that all of your connections are made in...
    view full answer...

  • Fit of Hitch Covers and Ball Covers on 2-Inch Hitch on 2007 Chrysler Aspen
  • If you want a cover for your actual hitch ball itself you can use # 42250 or one of the others shown on the included link. In the case of your 2007 Chrysler Aspen the only size of hitch receiver that is offered is the 2-inch Class III type; please see the linked page. Hitch BALLS can be a 1-7/8-inch diameter (or 2-inch or 2-5/16-inch) but a hitch receiver itself, which is mounted to a vehicle frame, will generally be either 1-1/4-inch, 2-inch or 2-1/2-inches square. In your 2-inch hitch...
    view full answer...

  • Front Mounted Trailer Hitch Fit on 2007 Chrysler Aspen or Dodge Durango
  • For your 2007 Chrysler Aspen, we have the Curt Front Mount Trailer Hitch Receiver # 31297. We unfortunately don't have any photos of this installed on either vehicle you mentioned, however I have attached a photo of how this hitch attaches so you can see how it fits right under the fascia at about the same height as the air dam underneath.
    view full answer...

  • Will Ultra-Fab Motor Home Trailer Hitch # UF35-946401 Fit a 2008 Chrysler Aspen
  • The Ultra-Fab Motor Home 2-Inch Trailer Hitch, part # UF35-946401, is intended for installation on the rear of motor homes that have an exposed 4-inch bumper. Installation requires that the bumper be fully open in order to allow the U-bolts to attach securely. This hitch is not suitable for use on your 2008 Chrysler Aspen. The bumper on your vehicle is designed to protect the passengers in the event of an impact. Even if you removed part of the bumper cover to expose the bumper itself,...
    view full answer...

  • Do Roof Top Cargo Bags Affect Gas Mileage
  • Anytime you put some on the roof of your vehicle gas mileage will suffer. It really varies as to how much the mileage will suffer. I have heard of people taking a big hit in gas mileage, and I have also heard of people who claim a zero loss in gas mileage. It will really depend on how you much stuff you load into the bag as well as the overall aerodynamics of the roof of your vehicle. I would imagine that you will lose a little bit of gas mileage, but it will not be too bad. The Thule...
    view full answer...

  • Dexter E-Z Flex Rubber Suspension System # K71-653-00 Fitment on 2005 Outback 28RSDS Trailer
  • The Dexter E-Z Flex Heavy Duty Rubber Suspension System # K71-653-00 is designed to be used with 35 inch axle spacing and a 8,000 lb capacity specification. On your trailer, if you measure the distance between the center of one axle to the center of the next axle it needs to measure 35 inches. The axle capacity needs to be 4,000 lbs. or less per axle. If you have 33 inch axle spacing you can use the Dexter E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 and it has a 6,000 lb...
    view full answer...

  • Universal Fit Towing Mirror for a 2008 Chrysler Aspen
  • As long as the mirrors on your 2008 Chrysler Aspen have a lip or gap between the glass and the mirror housing then you can install the K-Source mirror # KS3891. I have included a link to a video review of this mirror for you. I have also included a link to the other universal fit towing mirrors we offer.
    view full answer...

  • Electric Trailer Brakes for Trailer With 24,000 lb GVWR
  • We have electric brakes that have the weight capacity for a tandem axle trailer with a nearly 24,000 lb GVWR, and I can tell you how to determine if they will fit, but we don't have any way of knowing the correct brakes for a 1994 Trail King trailer. The electric brakes that do have the capacity you need are the following: - Electric Trailer Brake Kit w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right Hand - 12K # AKEBRK-12 These brakes measure 12-1/4" diameter x 5" wide, so in order...
    view full answer...

  • Will Roadmaster Rear Anti-Sway Bar # RM-1129-126 Fit a 2007 Chrysler Aspen
  • I spoke with my contact at Roadmaster and he said that the Roadmaster Rear Anti-Sway Bar, part # RM-1129-126, that fits the 2007 Dodge Durango will also fit the 2007 Chrysler Aspen. It will replace the factory rear sway bar.
    view full answer...