Will Ultra-Fab Motor Home Trailer Hitch # UF35-946401 Fit a 2008 Chrysler Aspen
Question:
will this hitch will fit a chrysler aspen 2008 bumper
asked by: Rodolfo C
Expert Reply:
The Ultra-Fab Motor Home 2-Inch Trailer Hitch, part # UF35-946401, is intended for installation on the rear of motor homes that have an exposed 4-inch bumper. Installation requires that the bumper be fully open in order to allow the U-bolts to attach securely.
This hitch is not suitable for use on your 2008 Chrysler Aspen. The bumper on your vehicle is designed to protect the passengers in the event of an impact. Even if you removed part of the bumper cover to expose the bumper itself, it would not have the dimensions nor the weight-carrying capacity needed to allow use of this hitch.
We do offer 4 trailer hitch receivers for your vehicle. These are all Class III 2-inch types rated for 600-lbs tongue weight and 6000-lbs gross towing weight. All can be seen on the link provided. One of these, the Curt # 13296, installs without drilling. All available hitches require some combination of drilling, temporary lowering of the exhaust and/or some minor trimming of the rear fascia for installation.
Any of these hitches is suitable for use with accessory items such as bike or cargo carriers, thanks to the substantial 600-lb tongue weight capacity. I have included a link to our page for bike racks that will fit this Class III hitch and also one for the cargo carriers suitable for use with it.
If your plans include towing you will also need a wiring harness to connect the lighting functions on your vehicle to those on your trailer. A link is provided that will take you to our page for wiring harnesses for your Aspen; here you can use the drop-down menu to Select Vehicle Style and see appropriate wiring based on the equipment on your Aspen. We also offer a complete cost-effective ball mount kit, part # 989900, which includes two ball mounts with varying rise and drop, two hitch balls, pin and clip, all in a handy carry bag. I have also linked two helpful towing articles that might be useful to you.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- CURT
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers
- RV and Camper Hitch
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 100 lbs TW
- 2 Inch Hitch
- Bolt-On
- Ultra-Fab Products
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Will 8 Lug Spare Tire Fit on Curt Trailer Hitch Mounted Spare Tire Carrier
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Frame Mounted Trailer Hitch for Travel Trailer
- Q&A: How to Carry a Spare Tire and Bike Rack on a Class C Ford E-450 Motorhome
- Q&A: Availability of Replacement Gearbox for Atwood Landing Gear System
- Q&A: Replacement Gear Box for Atwood 5th Wheel Landing Gear with a 75721 Motor
- Q&A: Hitch Mounted Spare Tire Carrier Recommendation for a Motorhome
- Article: Trailer Hitch Receiver Sizes
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: What is an RV-Approved Bike Rack? (And Do You REALLY Need One?)
- Q&A: Recommended Hitch Mounted Spare Tire Carrier for a Thor Motorhome
- Article: Best Hitch Cargo Carriers
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride