Dexter E-Z Flex Rubber Suspension System # K71-653-00 Fitment on 2005 Outback 28RSDS Trailer
Question:
Hi, I own a 2005 Outback 28RSDS which has, I believe, AlKO axles. Id like to replace the shackle plates and bolts and equalizer with this Dexter kit. Will it work properly with this system? If so, I assume the nylon bushings in the spring eyes have to come out. Correct? Thanks
asked by: Eric
Expert Reply:
The Dexter E-Z Flex Heavy Duty Rubber Suspension System # K71-653-00 is designed to be used with 35 inch axle spacing and a 8,000 lb capacity specification. On your trailer, if you measure the distance between the center of one axle to the center of the next axle it needs to measure 35 inches. The axle capacity needs to be 4,000 lbs. or less per axle.
If you have 33 inch axle spacing you can use the Dexter E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 and it has a 6,000 lb capacity. The axle capacity needs to be 3,000 lbs. or less per axle.
These systems are for spring width of 1-3/4 inches, so you will have to measure your spring width.
The nylon bushings do not have to be removed, they need to stay.
Products Referenced in This Question
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: MORryde CRE3000 or Dexter E-Z Flex Trailer Suspension Equalizers?
- Q&A: Recommended Suspension Enhancements for a 2022 Grand Design Imagine 2910BH
- Q&A: Equalizer Replacement Options for Dexter 13-122 Equalizer
- Q&A: Installing a MORryde MR27ZR on a 2020 Grand Design With Oddly Shaped Hangers
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Determining The Correct Replacement Suspension Components For A 2016 Grand Design Reflection 313RLTS
- Q&A: Will Dexter E-Z Flex Heavy Duty Rubber Suspension System Fit a 35 Inch Axle Spacing
- Q&A: Comparing Road Armor, Dexter E-Z Flex, and MORryder CRE-3000 Equalizers For Jayco Eagle 325BHS
- Article: Trailer Wiring Diagrams
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height