The correct Yakima Q Clips for your 2013 Hyundai Accent GLS are the Q35 Q Clips for the rear crossbar and the Q99 Q Clips for the front crossbar. These products are no longer made by the manufacturer, so if you aren't able to find something used, then I recommend replacing your roof rack.
The roof rack I recommend for your Accent is the Inno Roof Rack # INXB100-2, # INXS200, and # INK752. This will give you aero crossbars for less wind noise and compatibility with more accessories. It... view full answer...
Yes. The Inno Roof Rack Kit for a 2011 Hyundai Accent that uses the following parts will fit the 3 door hatchback models: # INB117, # INSUT, # INJK and # INK214. This kit includes the short roof adapter kit and fit kit designed to allow you to use these parts on your vehicle.
I've linked a short review video of these parts for you to have a look at. view full answer...
To begin according to the owners manual for your 2018 Hyundai Accent it recommends against using your vehicle for trailer towing. That being said here are the parts if you decide that you are going to use it for towing your camper.
For your Accent the Curt Trailer Hitch Receiver # C11548 has a class I rating that is capable of 200lbs tongue weight and a towing capacity of 2,000lbs.
You will need a wiring harness for the lights on your camper. The Curt Powered Tail Light Converter # C59236... view full answer...
In order to use a Blue Ox Rangefinder II towbar with your 2013 Hyundai Ascent you would need to use the Roadmaster EZ2 Base Plates # 521634-1 and the Blue Ox Rangefinder II or III Tow Bar to Roadmaster Base Plates Adapters # RM-037. There is not a Blue Ox base plate kit for your Ascent that is compatible with a Rangefinder II towbar.
There are some other parts you'll need to flat tow your 2013 Ascent, and a complete flat towing system consists of base plates, tow bar, tow bar wiring,... view full answer...
I have a great solution for you, however most bike racks are not rated to hold up to 65-70 lbs. If possible, removing the battery on your e-bike during transport will make finding an appropriate bike rack a lot easier.
If you can remove the battery, I recommend the Thule EasyFold # TH903202, which can hold up to two e-bikes with a weight capacity of 65 lbs per bike. This should meet the weight capacity of your e-bike with the battery removed. It also has a loading ramp to make loading... view full answer...
Our most popular hitch for your 2013 Hyundai Accent sedan is the Draw-Tite Sportframe Trailer Hitch # 24884. The manufacturer's gross trailer weight rating for this hitch is 2,000 lbs and the gross tongue weight rating is 200 lbs. I have sent you a link to the installation details that you can check out.
You will also need the following products to complete your towing setup:
Ball Mount # 3592
Pin and Clip # PC2
2 inch Hitch ball # 19258
Trailer Wiring Harness # 118559 view full answer...
The Roadmaster XL base plates, # 1623-1, are compatible with all Roadmaster tow bars and they do fit the 2010 Hyundai Accent with manual transmission.
You will also need safety cables like # RM-643 and a lighting solution. I recommend the bulb and socket kit # RM-155 because you will not have to cut into the vehicle wiring for installation. However, you will need to drill new holes into the backs of the tail light housing for the bulbs.
Most states now require a supplemental braking system... view full answer...
The SportRack Frontier Semi-Custom Roof Rack, # A21010S, includes all necessary parts to install on your 2012 Hyundai Accent.
There are a number of kayak carriers that will work with this roof rack. One of our most popular kayak carriers is the SportRack J-Stacker Kayak Carrier, # SR5511. This carrier will come with all necessary installation hardware and tie down straps. For added security you could also use the Hood Loops, # TH529, which will provide a better attachment point for your... view full answer...
We can help you select the correct hitch for your 2010 Hyundai Accent 3-Door Hatchback.
We have two models of 1-1/4-inch Class I hitch available for your hatchback. The Draw-Tite hitch # 24795 has a design that allows the main cross tube to be mostly concealed behind the fascia panel.
The Curt # C11092 will install such that the cross tube will still be visible.
Both hitches share identical capacities so really your choice between them comes down to price and appearance. Since the concealed-tube... view full answer...
Go To Results