Expert Answers about Toyota 4Runner
- Surco Rooftop Cargo Basket for Raised Siderails on 2009 Toyota 4Runner
- Surco rooftop baskets that mount to the factory siderails on your 2009 Toyota 4Runner are shown on the linked page. The largest of these is their 84 x 50-inch Safari # SPS5084-1101. This kit includes the required mounting adapters.
This basket weighs about 40-lbs so keep that in mind as you are planning your cargo load. The 4Runner's roof capacity must be enough for the weight of the basket itself plus what you load into it. So if your owner's manual says, just for example, that the roof...
view full answer... - Locking Knob That Is Compatible with a 3/8"-16 Thread Size
- The Locking Knob with Bolt # SR0018 is the only locking knob that I can find that works with a 3/8" bolt. More specially it comes with a 3/8"-16 bolt that is 2-1/4" long. It will have the bolt fit on the knob as opposed to the Locking Knob # P1040 that threads onto the bolt.
The Locking Knob # P1040 will only fit a M10 x 1.50 bolt.
view full answer... - How To Connect The Mr. Heater Buddy To RVs QD on Propane System
- It sounds like what you are looking for is the MB Sturgis Quick Disconnect Propane Hose for Small Appliance, # 100476-72-MBS. This is a 6' hose that has a 1/4" Male QD on one end with a 1by 20 on the other that connects to the Buddy Heater in place of the disposable/1 lb. bottles.
view full answer... - Floor Mats Available for 2013 Toyota 4Runner
- We have many different floor mats that would be compatible with your 2013 Toyota 4Runner, click the provided link to see our selection. To narrow your choices down, be sure to click the drop-down menu and choose the seating layout of your 4Runner. The choices include:
2 Rows of Seats, with Double Decker Cargo System
2 Rows of Seats, without Double Decker Cargo System
3 Rows of Seats
You can then use the filters on the left hand side of the page to further narrow down your choices according...
view full answer... - Front-Mount Hitch Installation on 2003 Toyota 4Runner
- Most of the hitches we sell are custom-fit items, meaning that they are designed and intended for only specific vehicles, meaning certain makes, model years and styles. Although we do offer multi-fit hitches for RVs the hitches we have for vehicles like your 2003 Toyota 4Runner are custom-fit.
We do not show a fit for a front hitch for your vehicle. I checked directly with both Curt and Draw-Tite, our two main hitch suppliers, and neither offers a front-mount hitch for your vehicle.
Your...
view full answer... - Fishing Pole Holder and Crossbars for 2016 Toyota 4Runner
- Yes and yes! The Rhino-Rack Fishing Rod Carrier # RR576F needs cross bars to clamp onto. An interesting thing about this one is that it is also the Rhino-Rack Ski and Snowboard Carrier # RR576. We have people that use this for both purposes for different seasons.
As for crossbars, the Curt Roof Rack for Raised Rails # C18118 is a great option. The best thing about these rails are that the cross bars are 2-1/8" wide x 7/8" tall. The Rhino-Rack Carrier # RR576F clamps around crossbars that...
view full answer... - Front Winch Mount Options for 2004 Toyota 4Runner
- I have a couple solutions that may work for you, since, like you pointed out, there are no custom fit front mount hitches, winch mounts or bumpers for your 2004 Toyota 4Runner.
One option is to use the Bulldog Winch Universal Winch Mounting Plate, # BDW20008. You will need to find a sturdy location on your 4Runner and drill mounting holes to bolt the plate. You also have the option to weld it in place for a permanent installation. The # BDW20008 is designed to fit the a 10 x 4-1/2 mounting...
view full answer... - Availability Of Redarc Tow-Pro Electric Brake Controller Mounting Kit EBMK-001
- We do have the Redarc Tow-Pro Electric Brake Controller Mounting Kit EBMK-001 that you are looking for. Our part number for this kit is # RE67FR.
view full answer... - Alternative Hitch Receiver to the Curt Multipurpose Ball Mount # D210
- I do have a solution for you, but unfortunately we do not have any Multipurpose Ball Mounts like the Curt # D210 that feature a 4" drop.
Instead what you can use is a Gen-Y adjustable ball mount like part # 325-GH-523 which has a 5" drop /rise and a 16K weight rating. If you are within 1" of the rise/drop needed for your towing application then you can use the ball mount. This means that you can use the included ball mount in the lowest position thich frees up the top receiver opening...
view full answer... - Are Replacement Remotes Available For Air Max RV Vent Fans
- We currently offer MaxxAir replacement remotes like the Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans # MA00A01150K and Replacement Remote for MaxxAir Roof Vent Exhaust Only Fans # MA00A01151K. If you have the Air Max brand instead of the MaxxAir then you'll need to reach out to the manufacturer of the Air Max brand instead.
view full answer... - Availability of Chrome or Stainless Steel Lug Nuts
- We carry a large selection of lug nut that will meet your preferences that you listed. Depending on the lug stud size, we carry both chrome and stainless, like # AM90070 1/2in-20 stainless lug nuts or # AM90049 1/2in-20 chrome plated lugs nuts.
I have a attached a link to the product page for all the lug nuts we offer. Once you know your lug stud size, just click the link for stud size at the left of the page to go to the product page will all the lug nuts that will fit your application.
view full answer... - Multi Purpose Ball Mount With Tallest Receiver
- The only other ball mount like the # MT70066 we offer is the # D210 from Curt. The receiver on this ball mount sits about 1/3 of an inch taller than the MaxxTow model you'd looked at.
view full answer... - Need a 4-Pole Trailer Wiring Harness for a 2003 Toyota 4Runner with No Trailer Wiring
- The TowReady T-One Vehicle Wiring Harness for the Toyota Highlander, part # 118413, is a vehicle-specific plug-and-play trailer wiring harness. Because it is made specifically for the Highlander, it offers the convenience of very simple plug-in installation without the need to cut and splice wires. However, it would be impractical to try to modify this Highlander harness for use in your 4Runner.
Although we do not offer a comparable plug-and-play trailer harness for your 4Runner there...
view full answer... - Hydraulic Disc or Drum Trailer Brakes for 10 Inch Wheels
- We have several options for trailer brakes that will fit a 10 inch wheel. For a 10 inch wheel you will need a 8-1/2 inch hub and drum assembly such as # T1544500042 which has a 5 on 4-1/2 bolt pattern. Then for hydraulic drum brakes we have just one option, # T4442000 for the right side and # T4442100 for the left side. These are designed for 3,000 pound axles.
For disc brakes we have the following options:
For 2,000 pound axles we have # K2HR2D.
For 3,500 pound axles we have # K2HR35D-8.
view full answer... - Availability of Turn Down Exhaust Tip For 2-3/4 Inch Exhaust On 2014 Toyota 4Runner
- We have several straight bolt or clamp-on exhaust tips which you can see by clicking the provided link, but none of the options offer a turn down or out. However, we do offer a weld-on option for a 2-3/4 inch tailpipe that has a turn down or out, part # MF35179.
If you don't weld, a local muffler shop should be able to install that for you quickly and easily.
view full answer... - Recommendation on Towing Mirrors to Fit a 2004 Toyota 4Runner
- Towing mirrors come in two types, custom-fit to the OEM style mirror assembly or a universal fit. For your 2004 Toyota 4Runner, there are no custom-fit towing mirrors available for this particular model vehicle.
We do carry some universal mirror that might fight, like # KS3891, but these mirrors have not been confirmed as an exact fit to your 4Runner's mirrors. You will need to measure your mirror to see if any of the universal applications will fit.
I have a link towards the bottom...
view full answer... - Why Is Taillight Converter Needed for Trailer Wiring on 2005 Toyota 4Runner
- The converter aspect of the trailer wiring for your 2005 Toyota 4Runner is not a voltage converter. Instead it converts the taillight signals to match what trailer wiring requires. Trailer stoplight and turn signals are carried on the same wire and some vehicles have the turn signals and the stoplights carried on two different circuits.
That's where the converter of the part # HM48925 comes and changes the vehicles separate circuits to combined and allows the trailer taillights to function...
view full answer... - Should I go with the Emergency Shut Down Version Portable Power Watchdog
- I would say that if you are using somewhat inconsistent power either from a generator or RV park and you have electronic equipment that you'll be powering that you care about I would definitely go with the auto shut down version of the Portable Watchdog Surge Protector part # HU67FR over the part # HU97FR.
view full answer... - Roadmaster Falcon Tow Bar Base Pin Needed
- I have heard back from my contacts at Roadmaster about the pin you were needing. Part # RM-910008-00 which is the 5/8 inch diameter Linchpin and Chain is the correct replacement for your Falcon Tow Bar.
view full answer... - Is the Bauer Products European Style RV Entry Lock Available in a Left-Hand Version
- I contacted the manufacturer about if there was a left-hand version of the Bauer Products European Style RV Entry Lock # BA58AR. They informed me that there is not a specific left hand version available but they said that the # BA58AR can be used for either right or left hand depending on how it is installed.
view full answer...
Go To Results