Thule reps were here not long ago and we were able to take a look at some of the platform bike racks they have.
I recommend the Thule T2 Pro 2 Bike Platform Rack, part # TH83JV for your MDX. I have attached a link to a review video for this bike rack you can check out. As the video shows, you can tilt the rack with the bikes loaded for access to the rear cargo area. The rack has a weight capacity of 60-lbs per bike and also features locks to secure the bikes to the rack and the rack to... view full answer...
We have a set of nerf bars that will fit your 2006 Ford Escape. They are the Westin E-Series Round Nerf Bars - 3" - Black Powder Coated Steel item # 23-1975. These are our only option for a vehicle that old. They are 3" wide and include a custom no drill installation kit. view full answer...
I checked with Forest River and the listed box length of the Forest River Rockwood 232ESP is listed at 12' therefore, the Adco SFS AquaShed RV Cover for Pop Up Campers up to 14' Long part # 290-12293 would be a perfect fit. This cover has an integrated cinching system which can provide a tight fit, weighted buckles for an easy install, and comes with a two year warranty.
We have found the 12' # 290-12292 to be slightly too short for your camper. view full answer...
I went ahead and checked out the Blue Ox Tow Bar Wiring Kit BLU79FR, and it actually is only deigned to fit the 2018-2021 Jeep Wranglers.
Instead, I recommend installing the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200.
This wiring harness will plug directly into your vehicle's wiring harness, and is guaranteed to fit your 2008 Jeep Wrangler. view full answer...
Yes, we do. You will want the Pollak Replacement 7-Pole item # PK11893. This will replace the damaged 7-way on your Tacoma. It plugs directly into your factory wiring harness.
I have linked a review video below. view full answer...
I recommend using the Go Power Solar Flex Eclipse Charging System w/ MPPT Solar Controller # GP67MR on your tear trailer. This solar panel is flexible and will follow the curve of your roof line. This particular kit has a 190watt panel. Each panel is 56" long x 27" wide x 1/8" deep allowing you to not have to mounts a rigid panel to your rack.
If you go with a ridged panel setup like the Go Power Overlander Solar Charging System # 34282181 you will need 4 of the Replacement Square-Bar... view full answer...
We have a heavy-duty coupler lock that will work for you, though the Atwood will not fit standard trailer couplers because the lock won't be able to clamp around the ball socket on a standard coupler. So instead, I recommend an option from Master Lock:
- Master Lock Coupler Lock # ML389DAT view full answer...
Everything sounds good with your installation. The Reese Dual Cam # RP26002 often makes the weight feel lighter than just the Reese Weight Distribution # RP66020 since the bar is sliding on the cam. As long as your vehicle is still leveling out correctly that is what is important.
The bolts used for connecting the hitch to a Shank # RP54970 are made of higher quality as they know there are multiple adjustements made on them to position the hitch at the correct height and pitch. We do offer... view full answer...
You can if you want too, however since your calipers are fine you do not need to replace them with your damaged dust boot.
We do carry a variety of dust boots like the Replacement Silicone Dust Boot w/ Metal Core for DeeMaxx 3,500-lb to 6,000-lb Disc Brakes # DE23FR which will work with 3.5K to 6K capacity axles.
Or
We also have the Replacement Rubber Dust Boot for Kodiak Disc Brake Calipers # K338B which will work with axles that have a capacity of 9K to 10K, and # K250BSSSI for axles... view full answer...
We have one Westin grille guard that is confirmed to fit the 2004 Dodge Ram 1500 which is the # 40-1205. Assuming you have this grille guard the correct hardware is the Replacement Hardware Kit for Westin Sportsman Grille Guard 40-1205 # 40-120PK. view full answer...
You will simply need the Malone MicroSport Trailer # MPG460G and 4 of the Malone Pilot Trailer Bike Racks # MPG2100 to be able to have a trailer that can carry 4 fat tire bikes. The bike racks are rated for tires up to 5" wide and a weight of up to 33lbs per bike. If you want an easier to use and heavier rated rack the Thule ProRide XT Roof Bike Rack # TH598004-FB holds the bike by the frame and is rated for up to 44lbs per bike and up to 5" wide tires.
I recommend getting a Spare Tire... view full answer...
Yes, we do have the Trailer Clearance or Side Marker Light # MC44AB1 available as an LED # MCL44AB1. This has the same 1 wire connection so the ground wire is achieved through the mounting hardware. We also have the Red LED # MCL44RB1 if you have any Red Lights MC44RB1 you would also like to replace with LED's. view full answer...
For all the benefits the Saris Freedom Bike Rack # SA4412B offers, one it does not have is the ability to fold up when not in use. If that's a feature you desire, there is a similar bike rack that does:
- Saris SuperClamp EX Bike Rack for 2 Bikes # SA4025F
The SuperClamp EX does have the fold-up feature for when not in use, and is a wheel-mounted rack so when you are carrying your bikes there is no frame contact. view full answer...
Currently the only receiver available for your 2006 Buick Lucerne is a class 2 like the Curt Trailer Hitch Receiver # C12044. This receiver is rated for up to 350lbs of tongue weight and towing up to 3,500lbs of trailer weight. Be sure not to exceed any manufacturer towing specs for your Lucerne. If you have a 2" accessory you are wanting to use the Trailer Hitch Receiver Adapter # HTAD will allow you to carry a 2" accessory with the 1-1/4" receiver.
The Vehicle Wiring Harness # 56047... view full answer...
We have hitches for your 2007 Cadillac CTS but there are no class II or above. The class rating system is based on weight and capacity of your vehicle and your cars towing capacity is only 1,000 lbs. The Curt Hitch item # C11307 is the best hitch for your car and will allow you to use your the full capacity available.
If you need a wiring harness to control your trailer or accessories lighting functions you will need the Curt Wiring Harness with 4-Pole Flat Trailer Connector item # C59236.
For... view full answer...
I do have a solution for you to be able to install the Redarc Tow-Pro Liberty Brake Controller # RED24FR on your 2021 Hyundai Palisade with the factory tow package. You will need a Plug-In Wiring Harness # RED69FR to splice into the factory wiring on the connector.
The Universal Wiring Harness # RED69FR where you found the images of the Liberty brake controller installed does not have the factory tow package. It uses different components to install the controller. view full answer...
The Square 2-Speed Jack - Drop Leg w/ Spring Return - Weld On - Sidewind - 25K # TJD2SP-25100 you were looking at does indeed have a Spring Return mechanism. You can see this Spring Return plunger on the button where the handle is. The models without spring return don't have this handle/plunger. view full answer...
I'm not sure which brand light you have there, or the dimensions, but it looks a lot like the Diamond # DG52728VP. This light measures 6" long x 3-1/2" tall x 2" deep. It uses the replacement lens # VAL97CR. We also have the Optronics # RVPL3C with the same dimensions. If it is not one of these brands I can't confirm if the lens will fit or not. Assuming the size of the light matches, you could use either one for a total replacement. view full answer...
The Replacement Quick Pins # DE99FR will fit your Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380. This is a much better option than the entire Triple Lug Kit # BX88154 you would have to get from Blue Ox for their specific pins. view full answer...