Since you are so close to the max towing and tongue weight capacity with your 2019 Ram 1500 Classic, by far the best option to help with sag when you are towing is an air bag system, the Air Lift LoadLifter 5000 Air Helper Springs # AL57365.
This will allow you to adjust the psi to your needs to give your Ram's suspension the exact amount of support it needs while riding much more comfortably than the stiff jounce springs like the Timbren Rear Suspension Enhancement # TDRTT1500.
To make... view full answer...
Yes, you absolutely can use the SumoSprings Solo Custom Helper Springs Item # SSR-307-47 with a weight distribution system. Those springs were designed for exactly the type of issue you are encountering. These will keep your 2019 Ram 1500 Classic level when you're towing your RV. You can use them with a weight distribution system but you may not need to unless you're also needing it for sway control. I recommend hauling with and without the weight distribution system connected after you... view full answer...
Yes. The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side # KS80710 are a confirmed fit on the 2019 Ram 1500 Classic with RWD and will work well with the power folding mirrors. If you check out the photos these mirrors even have cutouts to allow your puddle lights to still be seen, so they're a great choice for you.
I've linked a review video of these mirrors for you to have a look at, as well. view full answer...
The DeeZee Custom Headache Rack # DZ95050RTB that you referenced is confirmed as a fit for your 2019 Ram 1500 Classic and has a cut out at the top and center of the rack to allow the third brake light to be visible. view full answer...
The Draw-Tite Front Mount Trailer Hitch Receiver # 65062 you were looking at is confirmed to fit your 2021 Ram 1500 Classic Warlock per my contact at Draw-Tite.
With that said it is possible that you can keep the tow hooks after installing this hitch, but Ram had quite a few vehicle to vehicle variations of the tow hooks so you will need to try to reinstall them but I am unable to confirm if they can be reused.
I included an installation video of the # 65062 for you to take a look at. view full answer...
The Rampage XtremeLine Step Boards you referenced, part # RA16190-14615 are a fit for the 2019 Ram 1500 Classic Crew Cab so they won't work on your quad cab. For the Quad Cab, you'd want to use # RA14180-14615.
The nice thing about these step boards is their stainless construction, which means that they'll hold up for a long time. The steps are a pretty simple no-drill install.
I've linked to a product description video for the step boards. view full answer...
The correct Fastway e2 Weight Distribution System for a 2021 Forest River Wolf Pup 18TO is part # FA92-00-0800. The only other thing you'd need is a hitch ball, 2-5/16" Hitch Ball part # EQ91-00-6100. view full answer...
Yes, the CIPA Custom Towing Mirrors # CM11400 will fit on your 2019 Ram 1500 Classic Warlock. There is likely confusion on other sites with the 2019 model year having the classic based on previous model years and the new version. Also with the Warlock being a special edition but not using chrome mirrors like most special editions packages. view full answer...
Technically, there isn't a reason why you couldn't replace your Dexter 3,500 lb axle with a higher-rated one. That being said, that doesn't automatically increase your trailer's weight capacity. You would still be limited by the lowest-rated component and that can be something other than the axle, such as the trailer's frame. If you reach out to the trailer manufacturer, they should be able to tell you which is the lowest rated component on your trailer.
Now, in order to convert to the... view full answer...
I have the part you need, the Replacement Stake Pocket Insert for Adarac Custom Truck Bed Ladder Rack - Aluminum - Qty 1 # A70432 will not fit your vehicle, it is for Chevy/GMC.
You are looking for the Replacement Stake Pocket Insert for Adarac Custom Truck Bed Ladder Rack - Aluminum - Qty 1 # A70425. view full answer...
The mirror on the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side # KS80710 is not convex. It will fit on your 2019 Ram 1500 Classic.
If you are looking for a spot mirror/convex mirror.
The outer mirror on the CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2 # 11953-2 is convex.
Or If you want a full replacement with a convex mirror I highly suggest the K-Source Custom Flip Out Towing Mirrors - Manual - Textured Black - Pair # KS60193-94C.
I... view full answer...
Yes it sure will! You have found exactly the right wiring adapter for your 2021 Ram 1500 Classic and the Redarc Tow-Pro Liberty Brake Controller # RED24FR:
- Redarc Plug-and-Play Wiring Harness # 331-TPH-020
This wiring adapter will allow you to plug the brake controller right into your Ram 1500 for a clean, simple installation. view full answer...
Yes, the Pilot Stainless Steel Fuel Door Cover part # BBS-2332 does fit your 2019 Ram 1500 Classic quad cab. I attached a link to the return policy page as well. view full answer...
The Curt Front Hitch # 31374 that you referenced does fit your 2021 Ram 1500 Classic and would require you to remove the tow hooks. view full answer...
Yes, the Curt Trailer Hitch Receiver part # 13333 is a confirmed fit for a 2021 Ram 1500 Classic (All Cab Style). It features a simple bolt-on install. The instructions say to return the cap to the owner as it will not be reinstalled. That said, it looks like we were able to snap the cap back into place once the hitch was installed. I only saw one example of the cap not fitting back over the bolt. That said, if the bolt is torqued to spec it should be able to be reinstalled. view full answer...
For the chrome mirrors on your 2019 Ram 1500 Classic I recommend the Longview Custom Towing Mirrors # LVT-3100C. These slip on over your mirrors and then use a clip to secure around your mirror.
Attached is a sample installation on a 2017 Ram 1500 as well as a few photos a customer sent in with these installed on their 2014 Ram 1500 Laramie with chrome mirrors (same generation and style as what you have). view full answer...
I can confirm that your 2019 Ram 1500 Classic Warlock is compatible with the Draw-Tite Trailer Hitch Receiver # 41948.
According to Draw-Tite it is compatible with all models of 2019 Ram 1500 Classic. The only thing to note is that it will only fit so long as you do not already have a factory hitch installed on your truck.
I have added a link to a video install as well of the Draw-Tite Trailer Hitch Receiver # 41948. view full answer...
The correct set of Westin PRO TRAXX Oval Nerf Bars for your 2019 Ram 1500 Classic are part # 21-53555 which are designed specially for the Quad Cab. The Westin PRO TRAXX Oval Nerf Bars part # 21-53565 only fit the Crew Cab models which means they won't work on the Quad Cab. These nerf bars are an excellent option for you as they offer bolt-on installation and a wide saddle step pad for increased grip.
I have attached a photo of them installed on a similar Ram 2500 for you. view full answer...
We do indeed have the parts needed for you to flat tow your 2021 Ram 1500 Classic Warlock, which I'll go ahead and list out for you:
- Base Plate Kit: Blue Ox Base Plate Kit # BLU74FR
- Tow Bar: Blue Ox Avail Non-Binding Tow Bar # BX7420
- Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54
- Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System # DM86VR
I verified with Blue Ox for you that the base plates do fit your 2021 Ram 1500... view full answer...
Go To Results