Expert Answers about Pontiac
- Replacement Hardware For Curt Trailer Hitch 11119
- I would love to give you a single bolt, but those aren't available separately, so you will need the complete replacement hardware kit for your Curt C11119 hitch, which you can get at the following:
- Replacement Hardware Kit for Trailer Hitches # RHK
All you need to do is click # RHK, enter "C11119 " in the "Hitch Item Number" box and you're set.
view full answer... - What do Roof Rack Feet do for Inno Roof Rack on 2010 Pontiac Vibe With Naked Roof
- It sounds like you are asking the purpose of the "feet" of the Inno roof rack that fits your 2010 Pontiac Vibe. What the feet do is act as a base for the crossbars, and an attachment point for the fit kit. So what you will do is attach the fit kit to the feet, with the fit kit being what allows the rack to clamp to your door sills; then the crossbars will attach to the feet.
Essentially, the feet of a roof rack act as something of an anchor for the crossbars so you can mount them. The...
view full answer... - Is 2006 Pontiac Vibe FWD Automatic Transmission Flat Towable
- According to my research, your best bet would be to use a Tow Dolly like # RM-2050-1, but ONLY if your Vibe is equipped with the U341E automatic transmission, it can be towed if a transmission lube pump is installed. We don't offer the lube pumps, you'd need to locate a part # LP-BK01-019 lube pump kit online.
If you decide to go that route, you'd need base plates, a tow bar, safety cables, a wiring harness, a supplemental braking system and possibly a high/low adapter to successfully...
view full answer... - What are the Cut Outs for on the Back of Trailer Fender # PF11X35W-2
- If you look at some of the other pictures of Fender # PF11X35W-2 you will see that it has somewhat of a cut out on either side at the back but they are for the included mounting brackets. The same goes for the Fulton fenders but they do not come with mounting brackets.
Clearance lights can be surface mounted to the outside of the fenders. Rectangular lights measuring from 2-1/2 to 4 inches long seem to be the most popular for this application.
view full answer... - Does Air Lift Vehicle Air Bag Kit for the 1967 Pontiac GTO # AL60844 Provide Lift in Ride Height
- The Air Lift Vehicle Suspension Kit for the 1967 Pontiac GTO, part # AL60844, is a correct fit for the 1967 GTO (as long as it is not the wagon model). Air bag kits like this are designed primarily to provide support to a suspension that is in good working order when it is handling a heavy load. They are not designed to provide suspension lift or increase weight capacity so your ride height will remain unchanged. But if faced with a heavy load in the rear they will help prevent some of...
view full answer... - Determining the Location of the Transmission Return Line on a 1992 Pontiac Grand Prix
- I am not sure of the exact transmission in your 1992 Pontiac Grand Prix, but from my research the location of the transmission return line on your transmission is the horizontal line leaving the transmission. You should be able to follow that line to either the top or bottom of your radiator.
The easiest way to verify which line is the return line is by starting the car and putting it in drive for a few minutes. The cooler of the two lines will be the return line.
If you can tell me...
view full answer...
Go To Results