In regards to the Rail Kit for Kwikee RV Storage Slide Out Tray Assembly part # LC370793, the distance from the bottom to the top of the slide tray is 3-1/8" which you can see in the attached photo. view full answer...
The Global Link Replacement Roller for RV Slide Out part # 295-000176 does not have a rated weight capacity as per the manufacturer since it won't be supporting the full weight of the slide-out, rather just an assist. That said, if you are replacing existing rollers as long as you use the same number that you remove there won't be an issues with weight. view full answer...
The RV Cabinet Drawer Slide Socket Set - C-Shape - 2-3/8" Deep # 37270735 don't have a weight rating as they are meant to be used for standard cabinet drawer applications - so nothing heavy duty.
Usually when someone is asking about a weight capacity it's because they are needing to carry something fairly heavy. If this is you then you might consider installing something like the MORryde RV Generator Slide Out Tray part # MR49RR for a 22-3/4" x 16-1/4" tray or part # MR69RR for a 15-3/4"... view full answer...
Thanks for the measurements of your slide outs. For the 157-1/2" one you will want the Solera RV Slide-Out Awning item # LCV000168110 and for the 83" wide one you'll need the Solera RV Slide-Out Awning item # LCV000165062.
The item # LCV000165062 for your 83" wide slider is back ordered until the end of the year. If you have the clearance on either side you can use the larger Solera RV Slide-Out Awning item # LCV000168106. It fits slide-outs that are 86" - 91" wide and is 91" wide overall.... view full answer...
For the 5 foot 7 slide out the slide topper you'd need is the part # LCV000231482, for the 12 foot 9 inch slide out you'd need the # LCV000168109, and for the 10 foot 9 inch slide out # LCV000168328 which all of these are black. view full answer...
To install a 10 foot awning in black you'd need the following products:
13 foot awning and roller part # LCV000211447
Solera Power Conversion kit part # LC434723 view full answer...
The Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly - 60" Long - 800 lbs # LC370787 rails are 60" long and provide 42.42" of travel, so part of the cargo tray stays supported by the brackets. view full answer...
We have two options for your 154" slide out and they are identical except for the color. I have listed both of them below:
White - Solera RV Slide-Out Awning - 13'1" Wide - 48" Projection item # LCV000163300
Black - Solera RV Slide-Out Awning - 13'1" Wide - 48" Projection item # LCV000168109
Please note you will need to have 7" of clearance past the slide out on both sides of your RV. If you do not please email me back directly and I will help you find the right size that will work for... view full answer...
I went out to the warehouse and measure the The Rubber Wiper Seal for RV Slide Outs - Channel Mounted Press-In - 15' Long # SR94FR and found the space between the rubber grips to be 1/4". The picture does make the bulb look thicker but the total thickness is only 1/16". The grips will stick out just under a 1/16". view full answer...
Good question.
When it comes to different lengths of the Rubber Wiper Seal with Track for RV Slide Out - Stick On - 60' Long x 2-1/2" Wide # SR77FR.
You can get the 15 foot Rubber Wiper Seal with Track for RV Slide Out - Stick On - 15' Long x 2-13/16" Wide # SR87FR or the 30 foot Rubber Wiper Seal with Track for RV Slide Out - Stick On - 30' Long x 2-1/2" Wide # SR67FR. view full answer...
The size of the brackets of the Solera RV Slide-Out Awning # LCV000182037 is 1.05" from the bottom of the bracket to the top of the rivet hole. With 2-3/4" of space from the top of the vent to the top of the slide you will have more than enough room to mount the awning.
This particular awning will fit RVs with slide-outs 116" to 121" wide and up to 48" long. I have added a link to our entire selection of awnings in case you need one that is a different size, and also added a link to a... view full answer...
The depth of the Valterra Waste Valve for RV Black Water Tank part # T50A measures 4-1/4" end to end without the cap but please note the fittings don't butt up to the end on either side. view full answer...
I checked with Lippert and the only option to replace the 308958 controller is the Replacement INwall My RV Control Panel for Schwintek RV Slide-Outs item # LC24HD. I suggest checking your fuses and making sure they are the correct amp. They may be over or under rated and are causing the controller to short out. view full answer...