Expert Answers about Nissan Rogue
- Choosing Size of Yakima Skybox Rooftop Cargo Box for 2014 Nissan Rogue
- It is permissible for a rooftop cargo box to extend forward somewhat over the vehicle windshield, but with that said, one other thing to keep in mind as you consider the size of the cargo box you need is its weight. There is no sense buying a cargo box so large and heavy that the box itself consumes a large part of the vehicle's roof weight capacity.
The Yakima Skybox 21 # Y07337 itself weighs 62-lbs and this is likely to be up to half of your Rogue's roof weight limit. In truth, you...
view full answer... - Internal Dimensions for Yakima GrandTour Lo Rooftop Cargo Box 15 Cubic Ft.
- The internal dimensions of the Yakima GrandTour Lo Rooftop Cargo Box part # Y46FR are 85" long (lid support to lid support) x 27.5" wide (between the latches).
view full answer... - Bumper to Hitch Pin Hole Dimension of Draw-Tite Class II 36542 Hitch Installed on 2016 Nissan Rogue
- Although we haven't installed the Draw-Tite # 36542 Class II hitch on a 2016 Rogue, we have installed one on a 2015 model, where we found the hitch pin hole to rear of bumper distance was 5-1/2 inches.
Since the 2015 and 2016 are of the same generation, and the rear of the vehicle hasn't been modified from the 2015 model year, it would be very safe to say that measurement didn't change for the 2016 model year.
view full answer... - How Much Bed Space Do Access # A60085 Truck Bed Storage Pockets Take
- The Access HD Aluminum Treadplate Truck Bed Storage Pockets are constructed of aluminum treadplate that's right about 1/8 inch thick. Using one pocket on each side would take up about 1/4 of an inch or so of the distance between the wheel wells.
Measure the current distance between your wheel wells, and subtract about 1/4 of an inch, this should give you the available space between the wells if the pockets were used.
view full answer... - Recommended Wiring Harness for a 2023 Nissan Rogue
- Yes, we do. For a 2023 Nissan Rogue you will want the Curt T-Connector Vehicle Wiring Harness item # C44ER. This is a plug in harness that will provide you with a 4-way connector.
If you are planning on towing you will also need a ball mount kit item # C45534.
view full answer... - How Does a Hitch Being Installed Effect the Automatic Braking on a 2021 Nissan Rogue?
- The 2021 Nissan Rogue's have what's called rear automatic braking. It automatically applies the brakes and blares a screeching alarm if something is behind you. This is a great safety feature if you are backing up and someone walks out but it also is triggered by whatever you have connected to the hitch.
There is a way to turn off the braking. You go to the driver menu, scroll to settings, driver assistance, emergency braking, rear and then toggle it off.
As far as your lift assist function...
view full answer... - What Gauge is the Power Wire of the Tow Ready Wiring Kit # 118480
- The power wire of the Tow Ready Custom Wiring Kit # 118480 that you referenced is 12 gauge.
I attached an install video, installation instructions and an FAQ article on routing power wires for converters like this for you to check out also.
view full answer... - Will Draw Tite Hitch and Hollywood Rack Sport Rider 4 Fit a 2016 Nissan Rogue SV
- The Draw Tite hitch part # 75902 is a fit for your 2016 Nissan Rogue SV and would be a great choice. The Hollywood Racks # HR1400Z would also be a great choice for a bike rack that would fit and provide you with the ability to carry 2 or 4 bikes at a time.
The rack and the hitch would fit perfectly fine together. I attached an install video for the hitch and a review video for the rack.
view full answer... - Recommended Hitch for Carrying a Bike Rack w/ a 2021 Nissan Rogue SL
- The best hitch for your 2021 Nissan Rogue SL is going to be the etrailer Hitch item # e93ZR. This is a class III hitch with a 2" receiver and it is definitely compatible with your Thule Helium Pro Bike Rack item # TH9043PRO.
I have linked an installation video below so you can see the set up process and what it'll look like once installed.
view full answer... - Dimensions Of The Mounting Channel On Thule SquareBar Evo Crossbar
- The mounting slot for the Thule SquareBar Evo Crossbars - Steel - 47" # TH712200 are 9 7/8 inch long and 1/2 inch wide.
To fit the Thule SquareBar Evo # TH712200 on your 2020 Nissan Rogue you will need to use Evo Raised Rail Feet # TH710401 which attach to your factory front to back roof rails.
I included a video of the Thule SquareBar Evo # TH712200 being installed on a 2016 Nissan Rogue for you to take a look at.
view full answer... - Availability of Largest Portable Toilet Seat
- The largest portable toilet seat that we carry is the Dometic Portable Camping Seat which has a 5 gallon tank and comes with a Gray Base # DOM44FR.
The seat itself is 13-1/4" long and the cutout is 8-3/4" x 7-1/4". According to my research it is regularly among the top picks for portable toilets in 2020.
view full answer... - Maximum Tongue Weight Capacity for 2018 Nissan Rogue
- I took a look at the online version of the owner's manual for a 2018 Nissan Rogue and it does state that the "Maximum Tongue Load" is 110 lbs, like you mentioned. Even if you are not towing a trailer this would apply and you do need to go by the lowest-rated capacity when towing or using accessories.
So if you were to install the Curt Trailer Hitch # C13204 on your 2018 Rogue, which has a 525 lb tongue weight capacity you would have to abide by the 110 lb capacity of your vehicle. The...
view full answer... - Bolt Hole Spacing of Draw-Tite DT85MR Class III Hitch
- The inside to inside flange to flange distance of the # DT85MR Draw-Tite Class III hitch is 44 inches. Each mounting flange has 3 holes, the center hole is 2.87 inches from the mounting hole closest to the receiver tube, and the center hole and the forward-most hole are 6.59 inches apart. The hole spacing dimensioned are measured center to center. I've provided a photo showing these dimensions.
The # DT85MR is a confirmed fit for the 2021 Nissan Rogue. If you'll be using the hitch for...
view full answer... - What Are The Dimensions Of The # 42 E-Z Lube Spindle TRU37FR?
- There is not a Cad drawing of the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter # TRU37FR available, but I did include a diagram showing all of the dimensions.
It is recommended to have a an axle shop weld the spindle on as they will have all of the required tools and fixtures to square the spindle perfectly to the trailer.
view full answer... - Best Bike Rack Options For A 2017 Nissan Rogue
- The weight of the trailer hitch receiver on your 2017 Nissan Rogue will not count towards your tongue weight (TW). Only the weight of your bike rack and bikes will. Therefore, you will need to make sure that weight of your bikes and bike rack do not exceed 110 lbs while on the back of your Rogue.
For a trailer hitch receiver, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75902. For a bike rack, I recommend the Swagman XTC-2 2-Bike Platform Rack part # S64670 which is...
view full answer... - Where Does Spindle of Timbren 7k Axle Less Install Relative to Trailer Frame
- The spindle height relative to the trailer frame that the Timbren Axle Less kit part # TASR7KS02 you referenced is correct as I verified this with Timbren just now. It is -3/8 inches because this is a drop spindle setup which means the trailer is designed to sit closer to the ground.
view full answer... - Is the Snap-Lock Heavy Duty Truck Bed Cargo Net Stretchable
- The nylon rope on the Snap-Loc Heavy-Duty Truck Bed Cargo Net # SLAMCN6272-P does not stretch. The net tightens around the load with the built-in cinch rope. You can also use the included 6 carabiners to secure the net. The carabiners will allow you to secure the net where needed.
For a cargo net that does stretch, I recommend the Erickson Stretchable Truck Bed Cargo Net with Hooks # EM01012. This net measures 52 inches x 70 inches. The 22 integrated hooks secure the net down to a truck...
view full answer... - Class III Hitch for a 2022 Nissan Rogue
- For your 2022 Nissan Rogue you are going to want the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT85MR. This hitch is custom fit and bolts directly to your Nissan's frame with included hardware.
If you are need of a wiring harness to control your trailer's lighting functions I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK76FR.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534....
view full answer... - How Much Back Spacing Is Required For The Disc Brake Calipers On The Kodiak Disc Brakes # KOD27FR?
- The distance from the brake flange to the back of the caliper on the Kodiak Disc Brakes # KOD27FR is 2.4". This measurement is the maximum extension with worn brake pads so do note when you receive and install on your trailer the new pads will give you a slightly smaller number.
view full answer... - Dimensions for Thule Roof Cargo Basket # TH859XT
- The dimensions of Thule Canyon # TH859XT rack are 49" long x 40" wide x 6" tall. You can add 20 inches to the length with the extension # TH8591XT.
I attached a video review of this basket on a 2016 Nissan Rogue.
view full answer...
Go To Results