We have the Nissan relay kit part # C57000 which comes with two blue relays and a brown relay. There isn't a version of trailer wiring for your 2013 Nissan Frontier that has both the 7-way and the 4-way. view full answer...
Good news! You are able to trim the DeeZee Custom-Fit Truck Bed Mat # DZ86965 with a utility knife and it comes with markings that will show you exactly where to cut to fit it on your 2019 Nissan Frontier. It will take a little bit of muscle to accomplish this but it can be done and the mat will not fray once you've cut it. view full answer...
I recommend double checking your hub-face-to-hub-face measurement to ensure it really is 71" because we do carry the Dexter Trailer Axle w/ Idler Hubs # 20545I-EZ-72-15, which has a 72" hub-face-to-hub-face measurement and 58" spring-center-to-spring-center length. It also comes with idler hubs with a 5 on 4-1/2 bolt pattern all ready for 13" to 15" wheels.
If it really is 71" then you would need to use a universal fit option like the Timbren Axle-Less Trailer Suspension System with Hubs... view full answer...
The Yakima Outdoorsman 300 Ladder Rack Uprights for Compact Trucks, # Y01136-Y00409, is one option that we have for your 2012 Nissan Frontier King Cab, if your truck does not have the Utili-Track System.
Or, if your truck does not have the Utili-Track System and it has a 6 foot bed you can use one of two TracRac Systems. The TracONE Truck Bed Ladder Rack, # TH27000XT-EX, which has 800 lbs capacity and includes 4 loop tie down accessories. And, the G2 Sliding Ladder Rack, # TH43001XT-600,... view full answer...
If you only want to use the basic lighting functions provided by the 4-Way (left/right turn, brake, and running lights) then all you will need to do is plug the 4-Way end of the Adapter 4 pole top 6 pole, # A10-6034VP, into your vehicle 4-Way. The trailer 6-Way will then plug into the 6-Way receptacle on the adapter. You will also need to ground the white wire on the adapter to the vehicle frame at a clean and corrosion free metal surface. The remaining wires (blue for electric brakes and... view full answer...
I spoke with my contact in the Tech Services department at Tow Ready. He tells me that they have recently determined that the # C56225 Curt Wiring Harness carries over to the 2014 Frontier models.
The kit includes the 4-pole connector that plugs into the connector on the drivers side frame rail alongside the spare tire and the jumper and relays to activate the factory tow package. The relays and jumper plug into a connector located behind the toe kick in the passenger-side foot well as... view full answer...
For flat towing your 2005 Nissan Frontier you will need to first start with a base plate kit. For that you would need the part # 344-1B which is a confirmed fit.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you... view full answer...
We offer two different trailer wiring harnesses for your 2014 Nissan Frontier, a custom-fit plug-in kit # C56225 and a universal hard-wire type kit # 119147KIT, both from TowReady. I have linked an installation video for each. Either of these will provide a 4-pole flat trailer connector to provide lighting functions to your trailer.
You might consider adding a mounting bracket # 18144 to hold the connector at your rear bumper. view full answer...
We will not have that type of replacement mirror for your 2019 Nissan. I recommend the K-Source Universal Towing Mirrors, # KS69ZR. This has a ratcheting rubber straps that helps keep the mirrors attached tightly to your 2019 Nissan Frontier. I really like that the arms are hinged so that they can be easily adjusted to provide you with a wide field of vision. view full answer...
I am guessing that you are referring to a ladder rack for your 2022 Nissan Frontier with Utili-Track System. I have not heard of a rack that mounts to the Utili-Track System for installation.
We have the Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 which fits the 2022 Nissan Frontier's with the Utili-Track System, but it does not use the Utili-Track System as the mounting points. view full answer...
Although we don't have a chart, I do have a bull bar/light bar combination for your 2017 Nissan Frontier.
The Aries 20" Light Bar # AA1501262 is compatible with both the Aries Bull Bar Semi-Gloss Black Powder Coated Steel # AAB35-9002 and the Aries Bull Bar Polished Stainless Steel # AA35-9002. Both of these Bull Bars come with skid plates as well. view full answer...
Yes, the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK108 will fit your 2016 Nissan Frontier 4-door. The Crew Cab models are the 4 door models.
The Rhino Rack Kayak Carrier part # S510 would then be a great option for carrying your kayak as well. It has a 99 lb capacity.
Be sure to check the owners manual of your truck for the roof capacity. view full answer...
To install a 7-way, you'd first need to install the 4-pole flat connector (if you don't already have one.) I'd recommend the Curt wiring harness, part # C56225. Once that's in place, how you would proceed will depend on the trailer you're pulling.
If the trailer does NOT have brakes, but just the lighting circuits, you can simply use the # 37185 adapter. The adapter would plug into your existing 4-pole, and the white wire with the ring terminal on it would ground to the vehicle frame.... view full answer...
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
The Fastway e2 part # FA94-00-0600... view full answer...
We can help you choose a ladder rack for the truck cap you're installing on your 2003 Nissan Frontier King Cab 6-Foot Bed. If you can find out the maker of the cap and confirm its weight capacity this will help ensure you do not overload it.
We offer a range of truck cap ladder racks that can be seen on the link provided and a great cost-effective option in an adjustable model is the Rhino-Rack Track Mount Roof Rack System # Y01-140B. The rack's tracks mount to your cap and then allow... view full answer...
There are a few different styles of Access tonneau covers that will fit your 2011 Nissan Frontier. The Access tonneau covers are listed for a Nissan Frontier Crew Cab with a 5 foot bed and a Nissan Frontier King Cab with a 6 foot bed.
I am including a link to a product page that will show the Access tonneau covers that will fit your 2011 Nissan Frontier if it is a Crew Cab with a 5 foot bed. Also, a link to a product page that will list the Access tonneau covers that will fit a 2011 Nissan... view full answer...
Thule does recommend the 53 inch crossbar Wingbar Evo roof rack for your 2019 Frontier Crew Cab with the part numbers # TH711400, # TH710501, # TH145160 but since you have a 60 inch bar already I would try just ordering the feet and fit kit first to see if there is enough lower slot length on the bars to allow the longer bars. You could always order the 53 inch bars later.
We do have to recommend you stick with exact mounting location for the feet of the rack though. view full answer...
If you have the V6 3.3L Supercharged engine you will have two catalytic converters. There is one on the drivers side towards the front and one on the passenger side towards the front. The drivers side would be MagnaFlow Catalytic Converter, part # MF49478, and the passengers side would be MagnaFlow Catalytic Converter, part # MF49477.
If you have the V6 3.3L normally aspirated engine you will have a total of 4 catalytic converters. The two in front on the drivers and passenger side and... view full answer...
I have a solution for you, but the Hopkins Plug-N-Tow Wiring Harness, # 33525, will not fit the 2013 Nissan Frontier.
The Curt Wiring Harness with 4-Pole Flat Trailer Connector, # C56225, is confirmed to fit your 2013 Nissan Frontier truck. The wiring harness will include the needed relays that will activate the lighting functions on your Nissan Frontier.
I have attached a couple videos on this T-One harness for you to review. One is a general review of the harness and the other video... view full answer...
I might have a solution for you. However, the CE Smith Fender # CE19504 is not available in the color grey.
Fulton has the Single Axle Trailer Fenders, # F008594-2, that are silver in color. This fender is the closest color match to grey that we carry in trailer fenders for 14 inch wheels. This pair of fenders are similar in length of the CE Smith fenders as well as how they will mount to you trailer. view full answer...
Go To Results