If your Armada doesn't already have a hitch, you'll need to install one. The Curt Class III # 13188 would be an excellent choice. The Swagman Original # S64400 would be compatible with this hitch. I've linked you to a hitch install video you might find helpful.
If you already have a hitch, you'll need to take a measurement to determine how far under the vehicle the hitch is recessed. This carrier has the farthest distance from the hitch pin hole to the carrier than almost all that I have... view full answer...
Yes you can use the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0450 on your 2018 Nissan Armada with the air-leveling system.
What you will want to do is connect your trailer, allow your Armada to auto-level and then set up the Fastway e2.
This system is rated for a total tongue weight of up to 450 lbs; total tongue weight is the tongue weight of your loaded and ready-to-go trailer plus the weight of any cargo behind the rear axle of your Armada.
I have added links... view full answer...
Thanks for reaching out!
The K-Source Universal Towing Mirrors # KS3891-2 will typically fit a mirror that is 4-1/2" to 11-1/2" tall. We haven't had the opportunity to install this on a 2019 Nissan Armada as of yet (November 2022) but if your mirrors are within that height range then there's a good chance these will fit just fine!
Attached is a review video for you to check out. view full answer...
The Provider ST205/75R15 Radial Tire w 15" Viking Aluminum Wheel part # A15R45BMMFL will require a long style acorn lug nut, the Americana Trailer Wheel Lug Nut part # AM90049. This setup should work just fine with the CE Smith Offset Spare Trailer Tire Carrier part # CE27310G. view full answer...
The way the Lippert Entry Assist Handrail for SolidStep Manual RV Steps part # LC799640 installs and where it mounts will not fit on a 2 step Solid step like part # LC713662. There is no where for the bottom piece of the hand rail to install. I have attached a photo for your reference. For this reason I cannot recommend modifying the rail.
I recommend to use a Stromberg Carlson Folding Handrail for Fleet RVs part # AC-544 which installs on the side of the RV and folds up against the trailer... view full answer...
As long as the crossbars on your 2011 Nissan Armada Platinum are no wider than 3 inches, then the Curt Cargo Basket, # C18115, and the extension, # C18117, will fit. As a side note, this cargo basket requires a minimum crossbar spread of 15 inches, which should not be a problem on your vehicle. Also, the weight capacity of the cargo carrier remains at 150 lbs when the extension is added.
Before loading any cargo on your roof, I recommend checking your owners manual to verify the weight... view full answer...
The Firestone Coil-Rite Air Helper Springs # F4150 are confirmed to fit your 2005 Infiniti QX56 and will install inside of the rear coil springs just like on the Nissan Armada. I would recommend replacing your worn springs as well. These are designed to enhance your suspension by increasing stability and helping to keep your vehicle level when hauling a heavy load.
I have attached an installation and review video for your reference. view full answer...
Even though we haven't test fit the Thule Canyon XT # TH7503-TH7503 on a 2018 Nissan Armada I am confident that it will fit just fine and I'm pretty sure you could even get away with using the extension piece! The answer to your next question is yes, the Lock Cylinders # TH450400 will work with the Canyon XT. This is demonstrated in the attached review video.
I do have a solution for a roof rack but unfortunately Thule doesn't have a roof rack fit (like part # TH7503-TH7503 you mentioned)... view full answer...
There is one plug in option for a brake controller on your 2019 Nissan Armada, but the plug in adapter you mentioned is not a fit. There is not a wiring adapter or harness that works with a 2019 Armada, so the plug-in option that you need for this vehicle is the Curt Echo Mobile Trailer Brake Controller # C51180. This is a simple brake controller that gives you highly effective and smooth braking, and will plug directly into the 7-way on your Nissan.
I have added a link to a video review... view full answer...
The Yakima SkyBox NX 16 Roof Cargo Box # Y95AV will fit your 2018 Nissan Armada's factory crossbars if the crossbars measure less than 3-1/2 inches wide and less than 1-11/16 inches tall. For a definite confirmation of the fit, I recommend measuring the crossbars. As far as the rear hatch compatibility, the Yakima SkyBox NX 16 will allow you to fully open the rear hatch on your Armada. view full answer...
If you are looking to just use the brake controller for a week on your 2014 Nissan Armada then the Tekonsha PowerTrac # 39523 is a great option being that it is the most cost-effective. You just need the plug and play wiring harness # 3050-P to connect it to the plug under your dash.
This option does require you to mount a bracket at the bottom of your driver's side dash (like most of our brake controllers do) so if you're looking for something with as little physical effort as possible... view full answer...
Part # 50041-6008 is an older part number for Chevy trucks and has been replaced by RP50064-58.
The kit for your 2003 Ford F-350 is part # RP50082-58. The RBW Lil Rocker should drop right into the rails. I have included a link to the kit and the instructions below. view full answer...
Using the Tail Light Isolating Diode System, part # 38955 will tap into the tail light circuits of your Voyager, but not affect your existing tow wiring. The diodes are used to make sure that no voltage feeds back into the tow vehicle.
The product description page features easy to follow wiring diagrams to assist your installation. view full answer...
You didn't mention what year Armada you have but the 2015 Nissan Armada is a first gen so while we have a platform solution we don't have a Rhino Rack. So what we have that is a fit is the Front Runner Slimline II platform part # FR48YJ which is 85-1/4 inch by 53 inch. This platform so far fits 2008-2024 Nissan Armadas.
This would work great to support a tent like you are looking for. view full answer...
The picture you have provided looks like the 2014 Nissan Armada 2-wheel drive model that you have does have a bump stop and Timbren does not exclude 2-wheel drive models so you will be able to use Timbren springs # TNRARM. I have linked a help article on Timbren springs for you. You could also use Firestone air bags # F4150 which will fit inside of the rear coil springs. view full answer...
The mounts on the Thule Pull Top Ski and Snowboard Carrier # TH9276 are included and they are designed to be universal. They will fit Thule, Yakima and most factory load bars. They will fit load bars up to about 2-3/4 inches wide and 1 inch thick. Without knowing the dimensions of the load bars on your Armada, I cannot say for sure. But if you write back and tell me how wide and thick the bars are, I can measure one of the racks to make sure. You can also take a look at the other pictures... view full answer...
The Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector # N40975, will provide the 12V battery to the trailer through the 7-Way connection side only. The connector will work on your 2017 Armada, but you most likely do not need the relays as I believe they come in the more recent models although I can't confirm that. If you want the connector without the relays, I recommend the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975 view full answer...
I spoke with my contact at SportRack and she told me that the Vista XL Cargo Box, # SR7018, will fit on your 2012 Nissan Armada if it has the factory roof rack with crossbars that run side to side. This cargo carrier does include the mounting hardware to attach the cargo box to crossbars.
Another factor to consider when mounting a cargo box on your roof is rear hatch clearance. The back end of the Vista XL cargo box extends approximately 13 inches past the rear crossbar. If you have a... view full answer...
The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 is designed for the Lippert Ground Control 2.0 Electric Leveling System. The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486 is designed for the Lippert Ground Control 3.0 Electric Leveling System. If you did have a Lippert Ground Control Electric Leveling System then most likely it would be the 3.0 and not the 2.0 therefore the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486... view full answer...
Yes, the Tekonsha BRAKE-EVN Trailer Brake Controller item # TK63VR will work with your 2019 Nissan Armada. Since you have the factory tow package you can use the Plug in Wiring Adapter item # 3050-P to have a plug and play installation. view full answer...
Go To Results