Expert Answers about Mitsubishi-Fuso

• Installing a Brake Controller on a 2004 Mitsubishi FUSO FE145
• On your 2004 Mitsubishi FUSO FE-145, You will need to find a 12-volt signal of the brake light wiring when installing a brake controller. The best location would be to tap into the brake light wiring anywhere after the lighting control module. This signal will be 12-volt and will allow your controller to operate without causing any issues with the lighting module on your Mitsubishi. If you have not decided on a brake controller, then I recommend the Tekonsha Voyager # 39510. The Voyager...
  view full answer...


• Recommendation for Trailer Wiring a 2004 Mitsubishi Fuso FE
• I have a wiring solution for you, but there is no custom T-harness for your 2004 Mitsubishi-Fuso FE. The Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT is the best solution for a universal harness for your truck. This kit uses a powered converter with circuit protection to safeguard your vehicle and the module. It also includes everything necessary to hardwire it to your vehicle and connects without splicing into your current wiring. Be sure to use the included tester...
  view full answer...


• Trailer Hitch for a 2017 Mitsubishi-Fuso FG140
• For your 2017 Mitsubishi-Fuso FG140, I recommend using the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 so long as your frame rails do not exceed 44" apart (outside to outside). The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver is a universal fit option that is designed for larger trucks like your Mitsubishi-Fuso FG140. It has 16" tall brackets that can be cut and drilled to fit the exact specifications that you need. Therefore, you get to choose...
  view full answer...


• Recommended 5th Wheel Hitch For Flatbed 2012 Mitsubishi FUSO fe 125
• Adding a 5th wheel hitch to your 2012 Mitsubishi Fuso fe125 will require a custom installation. I recommend the Reese Low-Profile 5th Wheel Trailer Hitch - Dual Jaw - 30,000 lbs # RP30054 that will have 4 holes in the side brackets to your flat bed. The center to center mounting holes are 15 inches apart front to back and side to side are 25 inches. You may need to reinforce these areas to make them strong enough for the towing capacity of this hitch which may include adding a brace...
  view full answer...


• Can the Tekonsha Prodigy P3 Trailer Brake Controller be Installed on a 2017 Isuzu D-Max
• The 2017 Isuzu D-Max cannot be fitted with a 5th wheel trailer hitch. This is the case for all mid-sized trucks with the exception of the 1997 to 2004 Dodge Dakota. You could pull a regular travel trailer just not a 5th wheel or gooseneck trailer. To add a brake controller such as the P3 # 90195 to your D-Max you will need a 7-Way trailer connector and the brake controller itself. If the truck has a 7-Way trailer connector already then it is possible that the needed wires for a brake controller...
  view full answer...


• Brake Controller for 2007 Mitsubishi Fuso FM260
• I recommend using a Curt Echo Wireless Brake Controller # C51180 as it requires no wiring inside the cab. You plug it in between your 7-way and the trailer 7-way and control the brakes from your phone. If the phone isn't with the vehicle it will revert to the last loaded setting. It is a proportional brake controller so it will adjust automatically for light or severe braking. And it can be used with multiple vehicles and trailers as you can save 5 different configurations for easy use....
  view full answer...