It doesn't look like the picture came through, however we do have a potential replacement for you.
The Replacement Key for Thule Racks and Carriers # THKEYN064 will work for you if you have a Thule lock for your cargo box.
If you do not have this brand of locks, let me know and we can see if we have a replacement for you. view full answer...
For your 2015 Ram 3500, we have the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP56010-53.
For just the brackets, you can use # RP56010.
These rails are confirmed to fit your truck with the 6-1/2' bed and 8' bed, and measure 48" long, and 1-7/8" tall.
If you're also needing a hitch, # RP30928 will work great with if you have a long bed, or you can use # RP30051 if you have a short bed. view full answer...
Thanks so much for that info and we do indeed have the left hand Dexter electric brake you need for your 3,500 lb axle; I'll also list out the right hand just in case. Based on the info you provided, the correct parts are the following:
- Left Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs # 23-26
- Right Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs # 23-27
- Complete Kit: Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500... view full answer...
If your camper only has the wiring you will need more than just the Solera XL Power Awning Roller Assembly - 21' Wide - White Fade item # LCV000335015 you were looking at. That part is just the fabric and roller assembly.
For the full awning kit you will need the Solera 12V XL Power RV Awning - 21' Wide - Extra-Long 9'8" Projection - White Fade item # LCV000335015-362241. This canopy extends 9'8" from your RV when fully extended. You will need a minimum clearance of 4-1/2" between the... view full answer...
We do have a wide variety of loading ramp selections for you to choose from! I like the Aluminum Car Hauler Ramp Set - 60" x 14-1/2" - 6,000 lbs # 288-07502 because the aluminum construction makes them lightweight (20 lbs per ramp) and resistant to the elements so you don't have to worry about rust.
Attached is a review video of this ramp set for you to check out as well as our selection of loading ramps to filter through if you might want something else. view full answer...
It sounds like you're really looking for the MORryde Suspension Upgrade Kit for Tandem Axle Trailers 2-1/4" Shackle Straps # MR46ZR which comes with the 2-1/4" x 1/2" thick shackle straps and all of the wet bolts you'll need to upgrade the bolts on your 2020 Keystone Raptor 429.
I've linked a short video that outlines all of the parts included but it should cover everything you mentioned. view full answer...
That's a really good question, and there are only two things you will need in order to use the Reese sway control, which are the kit and a bracket that mounts to your ball mount. The bracket will allow the kit to mount to the included hitch ball. So what you will need are the following:
- Reese Friction Sway Control Kit # 83660
- Reese Sway-Control Bracket for 2" Ball Mounts # RP26003
That would be all you need, and you are definitely right that using this sway control kit is a really... view full answer...
Starting with your 1997 4Runner you'll need to add a 7 way trailer connector and a brake controller. You'll want to use the # ETBC7 to install the 7 way, since it comes with all of the wiring, circuit breakers and butt connectors needed to complete the installation using your existing 4 way. You'll also need a brake controller like the Tekonsha Prodigy P3 # 90195, which will provide proportional braking for your trailer and comes with an easy to read LCD screen.
When it comes to the trailer,... view full answer...
In order to flat tow your 2006 Volkswagen Beetle TDI, you will first need to install base plates. The base plates for your vehicle are Roadmaster EZ Base Plates, # 521231-1. You would then need a compatible tow bar like RoadMaster Tracker Tow Bar, # RM-020, and Roadmaster Tow Bar Quick Disconnect Kit, # RM-201, to be able to remove the detachable arms on the base plates. I have included a link to the installation details for the tow bar for reference.
To complete the towing set up for... view full answer...
You will need an installation kit to properly install a fifth wheel hitch on your 2005 Ford F250. The installation instructions you need will depend on which installation kit you use.
We offer both the vehicle specific Custom Install Kit, part # RP50082-58 and the Universal Installation Kit, part # RP30035. The Custom Kit is a bit more expensive, but it will save up to 50 percent of the install time when compared to the Universal Kit. I will include links to both kits, as well as the... view full answer...
In order to determine what replacement step pad for your running board, I would need to know what you currently have due to the replacements we carry being specific to the running boards.
We do have the Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001, however, which measures 21" long and 3" wide for the Westin E-Series Round Nerf Bars # 23-1400 that could work for you, but I can't say for certain. view full answer...
I didn't receive a picture but I do have a couple of options for clamps that are similar to the one you referenced. They both also include bolts so hopefully one of them is what you are looking for.
The Replacement Tail Clamp Assembly for Extang Solid Fold and Trifecta Tonneau Covers item # EX1035 is for Extang Solid Fold, Solid Fold 2.0, or Trifecta truck bed covers.
The Replacement Tail Clamp Assembly for Extang Solid Fold Tonneau Covers for Ford Super Dutys item # EX1042 is for Extang... view full answer...
You will need a plug on the outside of your 2021 Ram ProMaster 2500 and the wiring for this plug. In addition, you will need a converter to convert the power from 110V to 12V. I recommend the Furrion Replacement RV Power Inlet - 30 Amp Twist Lock - Stainless Steel, part # F30ITSSS. The twist lock keeps this cord weatherproof.
You will also need a transfer switch and a converter. You can get both with the Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V,... view full answer...
I would be happy to help you set up your 2015 BMW X5 for towing. You're going to need a hitch, a couple wiring harnesses, brake controller, and a ball mount with a ball.
For your hitch I recommend the EcoHitch Stealth Trailer Hitch Receiver item # EH44FR. This hitch is custom fit and bolts directly to your BMW with included hardware. The best feature about this hitch is that the receiver portion is completely removable. When you're not towing your trailer you can unbolt the receiver and... view full answer...
Typically most of our neighbors use the Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1 # FCN48TASF paired with the side marker light cameras # FCE48TASL as part of a complete Furrion camera system. If I had to choose one keeping in mind that the primary use is on the road then you'll likely be best served by the side marker light cameras # FCE48TASL for some blind spot assistance.
If you don't have a Vision S compatible monitor already then you... view full answer...
In order to choose a replacement pin box for your '89 Featherlite Holiday Rambler you can either look for a pin box number on your current pin box (like 1621 or 0719 for example) but if you can't locate a number the next best thing to do is take measurements of your pin box. If you can measure the width, distance from the center of the king pin to the first set of installed bolts, and then the distance between bolt holes horizontally and vertically I can use the table from the linked helpful... view full answer...
Since sewage connectors do need a proper seal (typically by using solvent # A05-0303) I do recommend changing out some of your sewage pipes as they are looking a bit rough.
It does look like you have a 3" round pipe from your photo so if you were to keep your current system you could possibly use a Fernco rubber sleeve to connect the Valterra Coupling # F02-2025BK to either an extension or to the Valterra Bladex Waste Valve # T50. If you need an extension you will put this waste valve... view full answer...
If you are talking about the inner diameter then the only bearing we have with a 1 inch inner diameter is # L44643. The matching race is # L44610 and it has an outer diameter of 1.980 inches. For a 1 inch spindle nut we have # 165686.
The best way to determine the correct replacement bearings is to go by the inner and outer bearings numbers that are stamped into the metal on the sides of the bearings. Otherwise you would need to measure the spindle using dial or digital calipers for the... view full answer...
You will actually need the Roadmaster base plate to Demco tow bar adapter # RM-032. The adapter # RM-033 does not come with the quick disconnects and # RM-034 is if you had Demco base plates. So the one that you need is # RM-032. view full answer...
Thanks for submitting the photo, that always makes life easier!
The Pollak 7 Pole to 4 Way Connector Adapter you'd looked at, part # PK12716 is the correct adapter. It'll allow you to plug your 4-pole connector equipped trailer into the 7-way trailer connector on your vehicle in order to provide lighting functions for your trailer. view full answer...
Go To Results