The Retractable Ratchet Strap part # Q54FR is the same one that comes with the Retractable Ratchet Straps part # Q34FR. The only difference is quantity. It may be more cost effective to purchase two individual straps than the kit or vice versa. I suggest whichever option is more cost effective at the time. view full answer...
If you are looking for just the e-track mount ratchet straps which comes with the Erickson ATV E-Track Tie-Down Kit part # EM09160 the closest thing we have is the Erickson E-Track Strap with Ratchet part # EM59136 which is just a slightly longer version. view full answer...
The Ratchet Tie Down Straps # ETBMB-05852 you referenced have a 1-year warranty. As long as you don't exceed the 830 lb working load limit (which you shouldn't on a hitch mount cargo carrier) then you should be just fine!
The 1 rating that I believe you are referencing is the current 1 review. The customer actually gave a 5 star review which is the best rating that you can give for a review.
These are still new to our company (as of November 2018) so we haven't had a chance to get a lot... view full answer...
The Fulton F2 Retractable, Ratchet Transom Tie-Downs # F72FV that you referenced does not have replaceable straps. Only solution would be new tie downs. view full answer...
The Erickson Big Bed Junior Hitch Mounted Load Extender, # EM07605, does not comes with the straps you see in the pictures. If you look at some of the pictures of just the extender, you will see two loops, one on each end, of the T part of the extender. You could run safety cables, rope, or hooks through these to help secure the cargo. The other straps are attached in the adjustments holes for the cross bar. You could also wrap a strap around each side of the cross bar to stabilize the... view full answer...
Each Erickson E-Track Tie-Down Kit # EM58523-09162 incudes 2 ratcheting tire straps with roller idlers and 2 moveable wheel chocks so 1 kit can be used for 2 tires. The safe working load limit for the whole kit would be 2,200 pounds so if the vehicle weighs less than that you would only need 1 kit. Otherwise you would need 2 kits to handle 4 tires. view full answer...
The Erickson Car Tie-Down Kit - Twisted Flat Hooks and Axle Strap w/ Ratchet # 08504-05 comes with one tie-down strap and one axle strap. view full answer...
The Erickson Adjustable Ratcheting Wheel Net # EM58522 is a single tie-down strap. It offers a safe working load limit (WLL) of 3333-lbs and can be used with any tire size from 14- to 29-inches.
Straps should always be chosen according to their safe working load limit (WLL). The item being towed must not exceed the WLL of the strap being used. To determine the maximum load, or break strength, of the tow strap, simply multiply the WLL by 3. The WLL is always one-third (1/3) of the maximum load. view full answer...
The straps that are included with the Thule Round Trip Sport Bike Travel Case # TH100500 are used to secure the box itself closed. You could use some ratchet straps such as # EM31353 to secure the box to the Whispbar roof rack crossbars. view full answer...
The Inno Velo Gripper Bike Rack for Truck Beds # INRT201 is sold as a set so you will get 2 clamp-on ratchet strap systems with this part. view full answer...
The Roadmaster Tow Dolly with Self-Steering Wheels and Electric Brakes, part # RM-2050-1 comes with two adjustable wheel nets.
The wheel nets included with the dolly will work with 12-inch to 16-inch tires and includes ratchets to secure the vehicle to the dolly. I have attached a link to a product review video for the tow dolly you can check out. view full answer...
The Erickson ATV E-Track Tie-Down Kit with Ratchet Straps and Wheel Chocks, part # EM09160, allows you to secure one ATV to a trailer deck or other surface. It includes a total of four wheel chocks, two for each of the wheels on one axle. The two straps connect to the chocks to secure the wheels and the ATV.
You will select your own hardware to mount the chocks to your trailer. Use either stainless or galvanized hardware to prevent corrosion. view full answer...
The Curt Stabilizing Strap, part # 18050, is not included with their hitches. It attaches to the bike rack then to the vehicle to keep the forces exerted on the bike rack and hitch when hitting bumps from damaging the hitch. On passenger cars this can be attached to the edge of the trunk lid that meets rear windshield or on SUVs, you can attach to the top edge of the hatch.
The use of a strap is necessary for Curt warranty requirements. You can also use bungee cords. I would recommend... view full answer...
I have a solution for you, but the straps that come with the Demco Kar Kaddy SS # DM9713045 will not fit on your Jeep Wrangler Rubicon with 34" tires. The Replacement 3-Point Large Wheel Tie-Down Strap for Demco Tow Dollies - Qty 1 # DM03528-93 is the largest Demco strap and is only designed for tires 33" tall and up to 12" wide; however you can use the Bulldog Winch Ratcheting Wheel Tie-Down Strap - Extra-Wide Tire - Vertical Mount - 3,335 lbs - Qty 1 # BDW20362 on the Kar Kaddy and they'll... view full answer...
The Dutton-Lainson Hand Winch, # DL15002, does not have a hand brake lever. The lever on the front of the winch is the ratchet pawl that changes the direction of the drum.
If you are looking for a braking winch, I would recommend the Dutton-Lainson Brake Winch, # DL14934. This winch has a slightly higher weight capacity than the winch you referenced, but when it comes to winch weight capacity, you can never really have too much. This winch is compatible with cable or straps. For a cable,... view full answer...
The Curt J-Style Kayak Carrier # C18320 comes with tie downs to secure the kayak to the carrier, but it doesn't come with bow and stern tie-downs. We recommend using bow and stern tie-downs because it just further secures your kayak and helps to keep it from sliding back and forth if you have any extreme conditions while driving.
I recommend either picking up the Yakima Bow/Stern Tie-Down Ropes w/ Ratchets and Strap Loops # Y04031 or just going with our J-Style Kayak Carrier # e98878 which... view full answer...
The Rhino-Rack Steel Mesh Roof Mounted Cargo Tray # RPBL-S280 includes universal hardware to allow mounting on most all types of roof rack crossbars. The hardware will fit bars up to 3-7/8-inches in diameter as long as they are at least 50-inches long and spaced apart no more than 58-inches. The slight curve in your crossbars will not interfere with installation. You will want to take care to not over-tighten the hardware as this could cause distortion of the mesh carrier.
Since this carrier... view full answer...
The Curt Trailer Hitch Receiver part # 13390 comes with everything you will need for installation except the tools including 4 carriage bolts, 4 hole spacers, 4 hex nuts, and 2 firewire bolt leaders. In order to install this hitch you will need a 10/19 mm socket, 8" extension, ratchet, torque wrench, 17/32" drill bit, rotary tool, and file.
If you will be doing any towing with the hitch then you will also need a wiring harness, ball mount, and hitch ball. For a wiring harness I recommend... view full answer...