Expert Answers about Land Rover Range Rover
- 2011 Range Rover L322 Snow Chains Recommendation Tire Size 255/50R20
- I have a great tire chain solution. Since you have very limited inner sidewall clearance on your vehicle and are running a different tire size than what your vehicle came with the best solution we have is the Konig K-Summit chains part # TH02230K77. Unlike most tire chains these do not require any inner sidewall clearance so we can promise that you won't have any clearance issues.
view full answer... - Roof Rack and Cargo Basket Recommendations for a 2006 Range Rover
- Most roof mounted accessories will require a range or specific crossbar spread. You can get an idea of the crossbar spread on your 2006 Range Rover by measuring from the center of one fitting to the center of the other fitting if you do not have a roof rack.
The Thule Roof Mounted Cargo Basket, # TH859XT, requires a crossbar spread between 20 inches and 37 inches.
I have attached demonstration videos of the Thule Canyon cargo basket for you to check out.
view full answer... - Could OptiMate Solar Duo Solar Charging System Keep RV Battery Topped Off
- As long as where you plan to store the RV has decent sunlight the OptiMate Solar Duo Solar Charging System with Controller # MA49JR would do a great job keeping the battery topped off. It can put out up to a charge of up to .83 amps which is going to be enough to keep it charged.
view full answer... - How To Fix Trailer Lights Hyper-Flashing
- It's not common for hyper-flash to occur on a trailer but this comes down to which trailer wiring harness is installed on the tow vehicle. If you are tied into the vehicles tail light circuits as opposed to a tow package port then hyper-flash is possible on the trailer. In order to fix this you can indeed use a set of resistors, the LED Light Bulb Load-Resistor Kit part # DI34ZR.
view full answer... - Cargo Carrier Recommendation for a 2010 Land Rover Range Rover
- The etrailer Hitch Cargo Carrier part # e98874 is a great cargo carrier that just happens to have a great price. It's our most popular cargo carrier because of that. I would recommend it for you highly and I know it will work well for you.
I attached a review video for you to check out for more info as well.
view full answer... - Rhino Rack Roof Rack Recommendation for a 2006 Range Rover HSE
- Yes, the Rhino-Rack RSP Series Roof Rack w/ Sportz Crossbars # RRRVP05 that you referenced will work on your 2006 Land Rover Range Rover with no factory roof rack as long as it is not a Sport model.
This product is designed to fit in the 6 factory fixed mounting points that are on the roof of your vehicle and will give you a roof rack with 3 cross bars that run from side to side.
view full answer... - Roof Rack and Cargo Box Recommendations for a 2006 Land Rover LR3
- In my opinion, the bars that will look the most OEM and offer a variety of accessory options are the Thule Aero Blade bars. These Thule bars offer 90 percent less wind noise and 55 percent less drag than other bars. The elliptical blade-like shape is more like what you would see in an OEM application.
Check out the link I provided that has all of the available roof racks with Aeroblade bars that will work on your vehicle. You will need to select the style of your vehicle.
All current...
view full answer... - Roof Rack Recommendation for 2002 Land Rover Range Rover
- For your 2002 Land Rover Range Rover with factory raised rails we have the Inno Roof Rack part numbers # INB147 and # INFR which is a confirmed fit. It clamps and wraps around the rail and does not require a mounting hole at all.
view full answer... - Does Draw Tite Hitch 75229 Fit 2017 Land Rover Range Rover Sport Diesel with Spare in Interior
- Yes, the Draw Tite hitch part # 75229 does fit your 2017 Land Rover Range Rover Sport diesel that has the spare that is stored inside the vehicle. The spare only affects the fit of the hitch if it's one that mounts under the vehicle.
view full answer... - Parts Needed to Install Brake Controller in a 2003 Land Rover Range Rover with 4-Way
- Since you have a 4-way installed on your 2003 Land Rover Range Rover currently we have just what you would need to install a brake controller. You would need the part # ETBC7. This will convert the 4-way to a 7-way and comes with everything needed to install a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake...
view full answer... - Installing Brake Controller in 2008 Land Rover Range Rover
- If your 2008 Land Rover Range Rover has the factory brake controller port it's going to be under the dash to the left of the steering column. Since you said you installed the factory trailer wiring harness I'd be inclined to think it's there since factory trailer wiring is present to some extent on your vehicle. But it's also possible the brake controller port is just not there and you'll need to hardwire in the controller to the 7-way you have now.
For a wiring kit to install the brake...
view full answer... - Roof Rack for 2017 Land Rover Range Rover
- The Rhino-Rack ROC25 Roof Rack # RR94XR is a compatible roof rack for the 2017 Land Rover Range Rover SPORT but not your vehicle if it's the larger non-sport version. Ever since the Land Rover Range Rover entered its fourth generation in 2012, its new design made it that most brands couldn't make custom fit roof racks for it. Most roof racks are made for the Range Rover Sport line instead.
The best option for a roof rack is to use the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. It is...
view full answer... - Roof Rack and Largest Cargo Basket Recommendation for a 1995 Land Rover Range Rover Classic
- First you will want to start with a roof rack on your 1995 Land Rover Range Rover Classic. For that you will want the Yakima roof rack that consists of the Round 66" CrossBars # Y00410 and the Yakima 1A Raingutter Towers # Y00101.
The absolute biggest roof rack cargo basket that would fit this roof rack would be the Surco Safari Rack 5.0 Rooftop Cargo Basket # SPS5084-Y400.
view full answer... - Availability Of 12" Long Ball Mount With 1-1/4" Hitch Ball Hole And 3" Rise
- I have an option that may work for you, but we do not have a ball mount with 4" rise, a 1-1/4" shank hole, and is 13" - 14-1/2" long.
The closest option we have is the Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 12" Long - 12,000 lbs # 4285 which is 12" long and has a 3" rise. For this option you would use 2-5/16" hitch ball # BWHB94003 which has a 3-1/4" long shank and has a 1" rise to get you back up to 4" total rise.
If your new trailer is under 6000lbs I recommend is...
view full answer... - How to Install Surco Safari Rack 5.0 Rooftop Cargo Basket on 2003 Land Rover Range Rover
- The Surco Safari Rack 5.0 Rooftop Cargo Basket # SPS5084-T400 referenced in your question is designed to mount to aftermarket Thule Roof Racks.
For a Thule Roof Rack that is confirmed to fit your 2003 Land Rover Range Rover, I recommend the Thule Traverse Square Bar Roof Rack. This system consists of # TH712500 for the 60 inch Square Load Bars, # TH480R for the Rapid Traverse Foot Pack, and # THKIT1274 for the Fit Kit. Once installed, this will give you a sturdy roof rack system with...
view full answer... - Recommendation for Trailer Light and Brake Controller Wiring for 2000 Land Rover Range Rover
- We do not have a custom trailer wiring harness available for your 2000 Land Rover Range Rover but I may have a solution for you. If you feel comfortable circut testing the wires on your Range Rover's taillight wiring, we do offer a Tekonsha ZCI Circuit Protected Wiring Harness, # 119250KIT, that could be used.
I spoke with my contact at one of our manufacturers and he said that the vast majority of Range Rovers came from the factory equipped with a hitch and trailer wiring. Therefore,...
view full answer... - Roof Rack Recommendation for 2019 Land Rover Range Rover
- For your 2019 Land Rover Range Rover with a naked roof there is only one option available and that is the SeaSucker roof rack part # 298-SX6000B which uses vacuum cups to attach to the roof of your vehicle. This rack design is very strong, requires no permanent modifications to your vehicle, and also is easily transferable to future vehicles so it really is a great option. I attached a picture of what it looks like installed as well as a review video on a similar Range Rover for more info...
view full answer... - Best Brake Controller for a 2018 Land Rover Range Rover
- The Redarc Tow-Pro Classic Trailer Brake Controller part # 331-EBRHV2 is the best brake controller option for a 2018 Land Rover Range Rover with the factory tow package because it has both user and proportional controlled modes as well as a factory-like install look.
It will offer splice free installation when used with the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED87FR
view full answer... - Adapting a 7-Pin European 7-Way on 1999 Range Rover to US 4-Way Flat Trailer Connector
- You would have the same problem using adapter # 118710 as you would with just splicing in a 4-Way. The adapter doesn't convert the separate signals to combined signals used by most trailers in the US.
You would need to add a converter, # RM-732, which will take the separate signals and combine them. You could then wire in a 4-Way flat such as # HM48030 on the output side of the converter.
view full answer... - Recommended Extended Ball Mount with 3-1/2 Inch Drop
- I recommend taking a look at the Curt Dual Length Ball Mount # C45230 for your application. This ball mount features a 3-5/8 inch drop but also has two separate pin holes that let you change the length of the shank so you can get a bit more extension. When using the second hitch pin hole, there is a distance of 11-1/8 inches from the center of the pin hole to the center of the hitch ball hole. The ball mount has a weight capacity of 7,500 pounds and a ball hole diameter of 1 inch.
For...
view full answer...
Go To Results