Given the wheel bolt pattern and the 8-247 that's cast into your existing brake drums, you have a 3500 lb axle. Assuming you have E-Z Lube spindles with the grease zerks in the end, you'd want to use the
# AKHD-545-35-EZ-K hub/drums you looked at. If you have standard spindles, use # 84546UC3.
At the very least, you'd want to replace your brake magnets, if they've got grooves worn into them as they won't get a good contact with the new drums for effective braking. If your brake assemblies... view full answer...
The Optronics Streamline LED Trailer Tail Light # STL79RB is going to be the closest light we have to what was put on by Lance for your 2185 travel trailer. This light is 17" long, 1-3/8" wide and 1" tall. The mounting holes are spread 16-1/8" on center and like yours the wiring is offset. It is 8" from the top and 9" from the bottom to the wiring center.
As the lights are going to be different heights I recommend replacing both of them so they match and use Clear Silicone # FAS59FR to... view full answer...
We do sell replacement brackets for some weight distribution systems. For example, the Replacement Lift Brackets with Handle # RP6637 is a replacement set of brackets for Reese weight distribution systems. If you can provide us with more information on the weight distribution system you are currently using, then we can try to match up a set of clamps/brackets for you. I have attached a link to our replacement parts for weight distribution hitches. view full answer...
For your Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1500, you can use the:
-Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars # BLU48FR.
As far as the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102 for your 2021 Lance 2375 TT goes, you're going to need to measure the width of your doorway, as well as the distance from bottom of the door to the ground.
For instance, the TorkLift GlowStep Revolution # TLA8102 mentioned above will fit... view full answer...
To replace the fabric on your awing you will need the Replacement 9'1" Fabric for 10' RV Awning # LCV000334346. As I cannot find the length of your slide online you will need to measure the fabric on that awning to determine if it is 106" or less. If you have 106" or less you will need the Fabric # LCV000447565 which is 106" the fabric can be easily trimmed to the correct length. If your slide fabric measures over 106" you will need the 162" Fabric # LCV000442075 which can be trimmed to... view full answer...
I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs # TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing gear help stabilize the steps on un-even ground and they'll work for entry heights between 31" and 42" tall. These aluminum steps are light weight and easy to move up and down, as well as remove during travel, so they're perfect for truck campers.... view full answer...
Sure can, I'd be happy to help you with that.
The gray version of the # T1003-6NVP replacement handle you mentioned is part # T1003-6GN. It's kind of hard to tell from the photo, but the handle is indeed gray in color. Both the gray and the black handle are compatible with the 1/4 inch threaded rod.
I've linked to a video showing how to install the handle. view full answer...
If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System # LC736514-ELKIT then you'll need part # LC182492. The flat bracket can be swapped out with part # LC182494 and the swing brackets can be replaced with part # LC182496. view full answer...
It sounds like your fabric is starting to tear and all you need is the fabric. If this is the case I was able to see your 2018 Lance 2375 travel trailer would have had a 19' awning from the factory. And her is a list of all the fabrics which will fit.
Green Fade # LCV000345103
Sand Fade # LCV000334429
Silver Fade # LCV000334434
Blue Fade # LCV000334432
White Fade # LCV000334426
Burgundy Fade # LCV000334431
If there is something else wrong with your awning please send me any images you... view full answer...
Unfortunately, your RV information does not tell me anything about your awning like manufacturer or width and that is needed to recommend the correct replacement. There are some more universal options out there, that reduce the importance of the manufacturer slightly.
For example the Replacement 14'1" Fabric for 15' RV Awning # LCV000334388 will fit a 15' Solera, Dometic A&E, or Carefree RV awning with an 8' projection. view full answer...
You will need to replace your entire system as the Voyager WiSight WVOM541AP is obsolete. I recommend upgrading to the Voyager WiSight 2.0 Wireless Backup Camera System # ASA37YR. While these are both WiSight systems the 2.0 and original WiSight are not cross compatible. view full answer...
The only potential issue I can see happening is if the converter in your 2017 Lance 1475 camper isn't rated for lithium batteries. If that's the case then we have the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel # PD4645V rated for 45 Amps (which should be what yours is rated for), but you'll need to install a jumper, which you can get at a computer store, in the LI position (see attached).
This solution works if you have one of the following power centers:
... view full answer...
I went ahead and checked what we have, and the closest I was able to find is the:
-Door Bumpers for RV Screen and Entry Door # 37211005.
These bumpers measure 3/4" wide, and 1/4" tall, making these 1/4" wider, and 1/4" shorter than your current bumpers.
Attached is a product review video for you to check out. view full answer...
Go To Results