Replacement Rubber Screen Door Bumper For A 1985 Lance Travel Trailer

Question

Question:

trying to replace a torn rubber bumper on my screen door Lance 1985 travel trailer 1/2 in diameter and 1/2 tall. Do you have a match hiding somewhere?

asked by: Todd M

0

Expert Reply:

I went ahead and checked what we have, and the closest I was able to find is the:

-Door Bumpers for RV Screen and Entry Door # 37211005.

These bumpers measure 3/4" wide, and 1/4" tall, making these 1/4" wider, and 1/4" shorter than your current bumpers.

Attached is a product review video for you to check out.

expert reply by: Bryce D

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should be…

view full answer...

Answer 3

The MORryde RV Door Latch Extender #MR22JR is a universal fit and will work with any paddle style latch with the proper clearances. Attached are some photos of those clearances along with a review video for you to check out. You can also find these…

view full answer...

Answer 4

There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…

view full answer...

Answer 5

The Replacement Amber Lens for MC66AB #A66AB or the Replacement Lens for MC31AB #A31AB are both 4 inches by 2-1/6 inch.

view full answer...

Answer 6

The Replacement Amber Lens for Peterson Oval Clearance and Side Marker Lights #108-15A looks to be a close match and it measures 3-3/4" long x 1-5/8" tall x 15/16" deep so it should work just fine.

view full answer...

Answer 7

We have the Nosing Edge Trim #362555-955 which is 1" wide with a 3/16" edge lip. The trim is 93-1/2" long and has an aluminum construction. Since it is aluminum it will bend fairly easily.

view full answer...

Replacement Rubber Screen Door Bumper For A 1985 Lance Travel Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching