The correct replacement tabs for the Blue Ox Base Plate Ki part # BX1128 which is a fit for a 2014 Jeep Grand Cherokee is the Replacement Attachment Tab Assemblies for Blue Ox Baseplate part # BLU57XR. view full answer...
The TireMinder A1AS TPMS for RVs and Trailers w/ Signal Booster # TM79FR uses CR1632 batteries. We do have the Replacement CR1632 Batteries for TireMinder TPMS # MRI-CR1632 available. view full answer...
I would be happy to help make a wiring recommendation for your 2021 Jeep Wrangler. I recommend the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector item # DM9523010-54. This complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. The diodes prevent electrical feedback and the damage it can cause to your car's electrical components. view full answer...
Are you speaking of a clearance/marker light? If so, the numbers you provided state that the lamp's lens is compliant with certain DOT regualations, but isn't necessarily an identifier that would help in finding a correct replacement. I'd recommend checking the lamp housing itself, and examine it closely for a part number. If I can get the actual part number of the lamp itself, or a photo with dimensions I can recommend a replacement lens or lamp if a lens isn't available.
The # MCL32RB... view full answer...
You definitely do not want to use the # e77SR on your trailer with a 3,500 lb axle. These are rated for a 2,000 lb axle which is well under your capacity. If you need a 26" leaf spring I would not get the # e54SR since they're a bit too short. You're better off getting the # e22YR. This is rated slightly higher at 4,000 lbs but that won't be an issue for the trailer and will likely allow them to last a bit longer. These measure 26" which is what you were looking for. view full answer...
The Solera awnings are a slower retracting awning. They will only go as fast as the correct motor will allow. The # LC266149 is for Solera awnings older than 2015 and the # LC373566 is for Solera awnings made after 2015. Unfortunately there is not a motor that is recommended for the awnings that will retract them faster. view full answer...
The Mopar roof rack for your 2015 Jeep Grand Cherokee was made by Thule so their replacement key # THKEYN112 will work with your E112 lock cylinder. These come in a quantity of 1 so you might want to order a few and keep a spare in a safe place. view full answer...
A Thule lock core with number E091 can use the replacement key part # THKEYN091 which is cut the same. My Thule contact confirmed this key will work in your lock.
If you ever need a replacement lock core you can use part # THLOCKN091 which you will install using Universal Change Key # 853-1251.
If you should ever want to change out all four lock cores on your rack the kit you can use is part # TH450400. This complete lock set includes 4 lock cores, 2 standard keys and the Universal Change... view full answer...
Without knowing what slide topper you have, I cannot say with 100% certainty what assembly you need. The odds are good that you have a Solera slide topper and the correct option for the right side would be the Replacement Right-Side Head and Roll Bar # LC34FR which fits all Solera RV slide-out awnings.
The # LC87FR you mentioned is for the left side and the # LC79WD is for the Lippert Solera 5000 Series slide topper specifically. view full answer...
It sounds like you're looking for the Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket - Metal - Vehicle End # PK11404, which can be used on the toad side to replace the socket that came with your Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247.
If I'm misunderstanding you and you're in need of a different part, just let me know and I'm happy to help you locate the part you're seeking. view full answer...
To replace the 7-way connector that you installed with the Universal Kit # ETBC7 on your 2007 Jeep Wrangler Unlimited, I recommend the Hopkins Adapter 4-Pole to 7-Pole # 37185. This is the same vehicle-end connector that was included in the kit and will convert the 4-way flat on your vehicle to a combination 7-way outlet and 4-pole flat outlet.
I have attached a demonstration video on this product for you to check out. view full answer...
The Replacement Yakima 1A Raingutter Tower # Y8810137 are the Yakima towers we carry that fit your 2021 Jeep Wrangler hard top with rain gutters. The whole system would be the Yakima 1A Raingutter Towers # Y00101 and use the Round 58" CrossBars for Yakima Roof Rack System # Y00409.
The Replacement Yakima Q Tower without Cam Cover Assembly # Y8880048 provides the base on vehicles without rain gutters or factory racks so they would not be the correct part for your Jeep.
If you know the... view full answer...
In order to find a replacement axle for your Harbor Freight trailer you will need to take some measurements to determine the correct axle length. The most important measurement is the distance from hub face to hub face.
Additionally, you can measure the spring center distance. When replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and these measurements.
If you provide... view full answer...
We do offer a replacement AC shroud for your Coleman Mach unit. MaxxAir offers the # MA8335A5261 replacement shroud for Coleman-Mach/RVP AC units that will work perfectly for you, per my contact at MaxxAir.
I've linked to a product description video for the replacement shroud I recommended. view full answer...
We have the exact replacement Blue Ox 400 - 600 lb round spring bars you need, at the following part number:
- Replacement Spring Bars for Blue Ox 2-Point Weight Distribution System # BLU94XR view full answer...
If the current sink you have has an oval shape to it the Better Bath Single Bowl part # LC209354 that you referenced would work great as it has dimensions of 16-3/4 inch by 14-1/2 inch which is close enough that wouldn't require additional trimming but worst case scenario you said you have room to do so. view full answer...
We do have a few dust caps available depending on which base plates you have. If you have the Roadmaster EZ2 Base Plates or the tube is 1-1/4" then you will want the # RM-212. If you have the Roadmaster EZ Base Plate or the tube is 1-1/2" then you will want the # RM-210. The RoadMaster Black Receiver Inserts # RM-200-5 is available if you have the Roadmaster MX or XL base plates. view full answer...
We do indeed offer the stand off brace assembly as a separate part as part # 8535. The brace, the mounting bracket and the hardware is included. The brace assemblies are sold individually, so you would need to order a quantity of 4. view full answer...