The Ratchet Tie Down Straps part # ETBMB-05852 are made overseas but I have a set myself that I keep in my truck and they have worked great so far without any issues. There's also a warranty on the straps so if anything should happen to them you'd be covered. That said, if you're looking exclusively for USA made the only option we have is the Snap-Loc Ratchet Tie-Down Strap part # SLLS18RSR. view full answer...
The tie down hooks on the 2 inch x 10 foot Easy Ratchet Tie Downs, item # EM34410, are rubber coated steel with a hook on one end and a loop on the other attached to the strap.
These hooks are formed by bending a single piece of round steel into the loop and hook resembling putting your two fingers together and making a hook at the end. view full answer...
I double checked with my contact at the manufacturer and I was told that the ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers # 297-7RSBB-UTV are assembled here in the USA using parts sourced from Taiwan, China and the USA. view full answer...
The Erickson Re-Tractable, Ratcheting, Bolt-On Tie-Down Strap, # EM34417, would be a good choice for marine applications. The metal parts are steel but have a zinc-dichromate coating for corrosion resistance. The handle is made of sturdy plastic that will not rust. You should not have problems with it seizing in a marine environment. To pro-long the life of it, you can clean off any salt deposits after use.
Tie-down straps should always be chosen according to their Safe Working Load Limit... view full answer...
The mounting hardware that comes with the BoatBuckle G2 Retractable, Ratcheting Gunwale Tie-Down Straps # IMF14221 is not made from stainless steel. The bolts and nuts are a zinc plated steel, which will be corrosion resistant. Obviously not as good as stainless steel, but it will be solid rust-resistance. view full answer...
I spoke with my contact at BoatBuckle and they told me that the metal components on the BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Straps, part # IMF17632, are made of steel but they are not stainless.
They told me the hook that attaches to the trailer on this system is zinc-coated for corrosion resistance, and the S-hooks are vinyl-coated to protect your boat finish.
We do offer straps that use stainless steel. Part # IMF14256, uses a stainless steel body that resists rust and... view full answer...
The BoatBuckle G2 Retractable, Ratcheting Bow Tie-Down Strap - Stainless Steel - 43" - 500 lbs # IMF14393 have steel s-hooks that are not stainless. They are vinyl coated to resist rust and protect your boat's finish. The other components are stainless to resist rust as they are exposed to the elements. view full answer...
I called my contact at TorkLift about the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs, part # TLC2220A.
They told me that all of the tie-down components are constructed of aluminum. The bracket portion that is a darker color is powder-coated. view full answer...
The Stake Pocket Tie-Down Anchors # PK-SPTD are is manufactured in China. If you are looking for an option that is manufactured in the U.S., I recommend the Brophy Stake Pocket Tie Down Anchor # TL2B. The ring is a bit larger on the Brophy (3 inches) and you will have the same 4,000-pound maximum weight capacity as the # PK-SPTD. view full answer...
I spoke with my contact at CR Brophy and the Trailer D-Ring Tie Down, Recessed 5K, item # RR05, is Zinc plated to resist rust and corrosion. I also inquired about the backing plate, item # BP05, for the D-Ring tie downs and it is also Zinc plated. view full answer...
Yes, I checked with Erickson and their products like the Erickson Tie-Down Rope w/ Ratchet # 01805 are made in Marine City, Michigan. view full answer...
The Erickson E-Track Tie Down Ring # 59147 have a 6,000 lb capacity and a 2,000 lb safe working load limit. The part is made in China to US specified standards and the company is located in Michigan. view full answer...
The tie-down anchors, or lumber stops, on the DeeZee Aluminum Cab Rack, # DZ95050R, are made of cast aluminum for superior rust resistance. They, like the cab rack, are also made right here in the United States. view full answer...
The Trailer D-Ring Tie Down # LRB1 that you referenced has a zinc finish to prevent corrosion.
Check out the review video I attached as well. view full answer...
That sounds ... complicated.
But to answer your question, the Brophy Light Duty D-Ring Tie-Down Anchor # SR10-C is made of zinc-plated steel according to the manufacturer.
I have also attached a photo showing the measurements of this d-ring for you to check out. view full answer...