Expert Answers about Itasca
- Are the Race Ramps Straight Show Cribs for Service and Display safe to Work Under
- The Race Ramps Straight Show Cribs for Service and Display # RR-SC are safe enough to work under, but you'll want to be sure to place your transmission in park (or the lowest gear setting) as well as engage your parking brake to help limit any movement.
With that being said, just be sure to use these for light mechanic work light changing out liquids. If you're needing to shift some heavy stuff around and whack something with a hammer then you'll want to take more of a traditional approach...
view full answer... - 2018 Toyota Tacoma Plug-In Trailer Wiring Harness Options
- We have 2 different wiring harnesses that tee in behind your 2018 Toyota Tacoma tail lights and provide trailer functions:
- Curt T-Connector # C56349
- Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # 22117
I wasn't able to find a great picture of the Toyota wiring harness you have, but from what I could gather I believe the Tekonsha OEM wiring kit # 22117 is what you're looking for since it tees in behind your tail lights for the basic lighting functions...
view full answer... - How Far Will The Erickson Clamps # EM09453 Open?
- The Erickson Clamps # EM09453 are capable of opening up to 2-1/8".
view full answer... - Can Blue Ox to Roadmaster Base Plate Kit # RM-032 be Used with 1208-1 Base Plate
- Yes, the Roadmaster to Blue Ox base plate kit adapter part # RM-032 that you referenced does work with the Roadmaster Crossbar base plate kit part # 1208-1.
You should note that this adapter was designed to work with Blue Ox tow bars so you would need to verify that's what you have.
view full answer... - Fulton XLT Winch Gear Availability
- Thanks for the details, Mark!
According to my research it looks like that #19 gear is no longer available so you'll either need to try to find it on something like a marketplace or we'll need to get you set up with a new winch.
If you're unable to find the part on a marketplace then I recommend checking out the Fulton XLT Single Speed Winch # F99CR which is rated for 1,500 lbs and comes with a 20' strap so it's pretty standard. Let me know if you need something with a higher rating and...
view full answer... - Comparing Digital And Mechanical Torque Wrenches For Torqueing Trailer Wheel Lug Nuts
- Digital torque wrenches can be vastly more accurate than a mechanical torque wrench, but the quality of the digital torque wrench plays a big part in the accuracy. A good digital torque wrench will set you back quite a bit more than a mechanical torque wrench like part # PT79FR. Both digital and mechanical torque wrenches need to be recalibrated regularly and mechanical torque wrenches need to be set back to zero every time in order to maintain calibration. When it comes to the lug nuts...
view full answer... - Parts Needed to Install Redarc Tow-Pro Liberty in 2023 Ram ProMaster 2500 w/ Tow Package
- Good news for you Stephen - since your 2023 Ram ProMaster 2500 already has the factory tow package, the only things you'll need are the brake controller and wiring harness and you're all set. Here are the exact parts for you:
- Redarc Tow-Pro Liberty Brake Controller # RED24FR
- Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR
This is a splice-in harness, which is needed because your ProMaster doesn't have a port for a brake controller, even with the tow package.
view full answer... - Do Awning Arms Need To Be Secured To The Wall Framing?
- When installing an awning like the Solera Smart Arm 12V Power RV Awning # LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where there is support behind the wall.
That said, awnings are mainly supported by the framing at the top of the RV, so it isn't crucial to have the arms line up with vertical studs. The top part of the arms will be secured to the top framing and...
view full answer... - Will the Lift Gate on a 2018 Subaru Outback Clear the RockyMounts MonoRail
- No, the liftgate on your 2018 Subaru Outback will not clear the RockyMounts MonoRail # RKY10007 while in the stowed position - you'd need to tilt the rack away from the hatch in order to get the liftgate to open.
view full answer... - Do Rear TorkLift Tie-Downs Need to be Different with TorkLift SuperHitch Installed on a Ram 2500
- The correct rear TorkLift Tie-Downs for the TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1109 installed on your Ram 2500 is the Kit # TLR3507, which install directly to the side plates as you can see in the attached photo.
With a standard hitch installed the tie-downs should be mounted to your vehicle frame but this TorkLift hitch has mounting points on it for the tie-downs to be installed on which is why you need to swap out the rear kit you have installed.
view full answer... - Best Ladder Rack For a 2021 Chevy Colorado Long Bed With BAK Revolver X4s Tonneau Cover
- The TruXedo Elevate Truck Bed Rack System # TX26NV is going to be the best ladder rack to use with the BAK Revolver X4s Hard Tonneau Cover # BAK92VR. This rack will mount with the hardware used to attach the tonneau cover. These ladder rack rails will stay in place on the bed and you can loosen the upright mounting hardware to easily remove and adjust the racks when needed.
view full answer... - Do You Have Plastic Fender Skirts for 5th Wheel Trailers
- Yes, we do have a couple of options! They're designed to help keep rocks and debris away from your 5th wheel. I have listed the three parts we have below:
Phoenix USA Flexy Flares w/ Wire and Bolts - Universal Fit - Rubber - 61" x 2-1/2" - Qty 2 item # PX52-188
Phoenix USA Flexy Flare - Universal Fit - Rubber - 4-1/2" Wide - Per Foot item # PX52-172PF
Phoenix USA Flexy Flare - Universal Fit - Rubber - 2-1/4" Wide - Per Foot item # PX52-191
view full answer... - Availability of 8k Roadmaster Comfort Ride Triple Axle Setup for 2020 Grand Design Momentum 399TH
- Yes, we do have a triple axle Roadmaster Comfort Ride kit for 8k axles with the part # RM-2460-2580-3 which is for 3 inch diameter axles. Since you have 7k Dexter axles that would mean you have 3 inch diameter axles. This would make a huge difference in ride quality and performance on your 2020 Grand Design Momentum 399TH. You should note that just because you will have more suspension capacity the overall capacity of the trailer would not increase.
view full answer... - Are 5th Wheel Rails Needed for a Sliding Hitch
- Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need # DM8552016-71 for your 2006 Dodge Ram.
view full answer... - Does Solera 18V Power RV Awning Come With Lock
- The Solera 18V Power RV Awning # LC729517 used to have a locking latch on the arms but Lippert stopped making it. Since the awning never really had problems with wind or while driving they decided it wasn't needed. The same is true for any of their power awnings. I have seen some people run straps behind the bracket that they can secure around the arms to hold them in place but nobody makes a specific lock for the awning.
view full answer... - How To Find Out If The Reese Spacer Kit Works With Reese Airborne Sidewinder On 2024 Artic Fox
- To verify the Spacer Kit # RP61301 will work on your particular Reese Airborne Sidewinder I will need to know the model number off the pin box as well as the LCI frame tag located on the mounting arm of your 2024 Artic Fox 27-5. With these numbers I will be able to verify the bolt patterns are all going to line up correctly as there are several different possibilities out there and not all model 5th wheels will always use the same pin box.
view full answer... - Roof Rack Recommendation for a 2024 Porsche Cayenne
- Hey Bonnie, thanks for reaching out!
According to my research all of the 2024 Porsche Cayenne models come standard with flush rails on the roof except for the "S" model - this model has the flush rails as an add-on option. If you have the flush rails then I recommend using the Thule WingBar Evo roof rack with the parts listed below as it's the easiest to install, it looks great, and it will allow you to use the Hullavator Pro # TH898.
If you happen to have the "S" model and didn't get...
view full answer... - Is There A Trailer Ramp Spring Available With Longer Ears?
- The Ramp Spring # RS16933RH for right hand and # RS16933LH for left hand are the only ramp springs of this type that we offer. Each ear is about 3-3/4" long when measured from coil to tip, or 5-1/4" when measured from the center of the coil to the tip. Each Spring has 6 full coils and 2 partial end coils that terminate at the spring ends. Unfortunately, we do not offer anything with longer ears.
view full answer... - Clearance for Installation of MORryde RV Cargo Sliding Tray
- The MORryde RV Cargo Sliding Tray # MR47FR has 1.57" of clearance from the bottom of the tray to the bottom of the slides. More than likely you will need the Height Adjustment Kit # MR34VR which will raise the tray to sit 2-1/2", 2-3/4", or 3-1/8" higher.
view full answer... - Solution for Hitch on 1990 DOdge B250 Ram Van That Can't Use Frame Mounted Hitch
- The Curt # C13041 is the only aftermarket hitch we carry for a 1990 Dodge Van. Since you can't bolt anything to the frame you will have to use a universal weld-on hitch. Something like the # 41990-07 would work or you can take the # E17 to a local fabricator and have them fashion a custom hitch for the van.
view full answer...
Go To Results