In order to mount your Curt # C57674 onto your Curt Class III Hitch # C13153 I recommend using the Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch # C58000 because it provides a much cleaner mounting solution than using the brackets that you were looking at.
I've linked an installation video of the C58000 that you may want to have a look at, as well. view full answer...
The Electric Trailer Brake Kit # AKEBRK-2 comes with one left and one right brake assembly and included mounting hardware. The drums are not included. I would need to know what your inner and outer bearing numbers are on your current axle and I will be able to tell you what you need.
The nuts and lock washers # BRKH7 are sold separately. These brakes will work with 10 inch 12 inch and 13 inch wheels, and have an axle rating of 2,000 pounds.
I attached a review video link below. view full answer...
If your 2013 Dodge Durango came with a factory installed 7-way trailer connector, then you can use the Tekonsha Brake Control Wiring Adapter, # TK93VR, to connect the Primus IQ Brake Controller, # TK90160. The factor brake controller port on your Durango should be located to the left of the emergency brake pedal taped to another harness. I have attached installation instructions for you to check out.
If your Durango does not have the factory 7-way trailer connector, then you will not... view full answer...
When it comes to flat towing your 2022 Hyundai on a tow dolly, most of the trailer wiring is already included with the dolly. The Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 pounds # DM9713045 has a full LED DOT lighting package which includes brake, tail, and turn signal lights So you will not need the lights working on your Santa Fe. It also has the front fender marker lights, and the license plate marker lights and has a 4-flat trailer connector.
Your RV will either... view full answer...
I recommend going with a hitch mounted bike rack that attaches to a swing away system because of ease of use and potential clearance issues. If your 2020 Hyundai Sante Fe doesn't already have a hitch receiver the Curt Trailer Hitch Receiver item # C13195. I have attached a picture of what it will look like installed on a Sante Fe.
For a swing away adapter, I recommend the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches item # Y02483. The pivoting hitch extender lets... view full answer...
To convert the 4 pole plug # 118415 on your 2009 Hyundai Santa Fe to a 6 pole that will connect to your trailer, you can use the Hopkins Adapter # 37175 if your trailer uses a round connector, which can simply be plugged into your existing 4-pole connector.
If your trailer has a 6-way square connector, you will instead need to use the Hopkins 6-Pole Square Kit # 37995. For this you will actually need to hardwire the harness into your vehicle's 4-pole wires. The kit comes with both connection... view full answer...
Either part # 118415 or C56078 will work with all 2008 Hyundai Santa Fe models. They would plug inline with the wiring harness feeding the tail light assemblies on either side of the vehicle.
The Tow Ready has a slightly higher amperage rating, but other than that both wiring harnesses are very similar.
I have provided links to the install details for both harnesses, as well as an install video showing the # 118415 being installed on a 2008 Santa Fe. view full answer...
I'd be happy to help you with that. Along with the Draw-Tite # 41543 hitch you'd looked at, you'll need the # 118473 trailer wiring harness. The harness is a plug and play installation, and would plug inline at the connection point where the vehicle's taillight wiring harnesses plug into the taillight assemblies as shown in the video I've linked for you.
You'll also need a ball mount like # C45010 with a pin and clip # PC3, as well as # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. view full answer...
You will start by installing the trailer wiring harness # 118571 (fits Sport models) that you have referenced. I have linked the instructions for you. To add a brake controller you will need to use 4 and 7-Way installation kit # ETBC7. This will provide the 7-Way and the wiring needed to install the P2, # 90885.
I have included some links to instructions and a video that will help you with this installation. view full answer...
If your 2019 Hyundai Santa Fe has the tow package then you want to use the Curt T-Connector # CU94FR which has the 4-Way Flat connector that you asked about and plugs into the factory connector which is located under the vehicle, behind the rear bumper, on the driver’s side.
You said that you already have the trailer hitch for towing, but you didn't mention a ball mount kit. If your trailer hitch has a 2" receiver like the Curt # C13195 which fits a 2019 Santa Fe then I recommend the Curt... view full answer...
According to the 2002 Hyundai Santa Fe owner's manual, the towing capacity of the vehicle can vary from 1200 to 2700 lbs depending on how the vehicle is equipped and if the trailer has brakes. Check your owner's manual for specifics.
The Curt # C13505 would work well for towing a rental trailer. In addition to the hitch, you'd need a trailer wiring harness, a ball mount and the correct trailer ball. The trailer rental place should be able to tell you what ball size you need.
I'd recommend:
Tow... view full answer...
Actually the # ETBC7 brake controller install kit includes the components needed to add both braking signal AND also 12V trailer battery charge circuits to your 2013 Santa Fe. It includes the 7-way socket. To install the ETBC7 you just need to have a working 4-pole harness on the car already. A video and help article are linked for you to illustrate installation.
If you need a 4-pole use kit # C56332 if your Santa Fe has the factory tow package; use kit # C56184 if it does not.
The Prodigy... view full answer...
For your 2020 Hyundai Santa Fe, I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2, the feet # RRRCL4, and the fit kit # RR66QJ.
This roof rack will fit onto the flush mounted rails on your Hyundai Santa Fe, and can support up to 220-lbs, however the maximum capacity is ultimately determined by your vehicle.
Since you mentioned you're wanting to transport a couple of Expression 11 Kayaks, I recommend using the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000 has... view full answer...
Since there aren't any 7-Way trailer connectors that will plug into the 2015 Hyundai Santa Fe you will need to hardwire one in. Half the work is already done since you have a 4-Way installed already. All you will need is kit # ETBC7 to add a 7-Way and retain the 4-Way. I have included some links that show and explain the ETBC7 installation for you. view full answer...
We have exactly what you're looking for with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # CU94FR. This plugs into the OEM connector on your 2020 Hyundai Santa Fe and gives you a 4-Way flat connector that then supplies your trailer with the different light functions. I have attached a video of us installing this on a 2019 Santa Fe that you can reference for the install.
If you don't already have a trailer hitch then I recommend using the etrailer.com Trailer Hitch... view full answer...
For a more cost effective option to go with the Yakima BackSwing Swing Away Hitch Extender item # Y02483, I recommend the Kuat Transfer V2 Bike Rack for 2 Bikes item # KU84FR. It will still function with the swing away adapter and has the capacity to hold two bikes up to 60 lbs apiece. view full answer...
For a 7-way on your 2015 Hyundai Santa Fe you can use the Tekonsha # TK24FR. This will plug into the 2 factory ports you're describing for installation. It also comes with a wiring adapter to fit Tekonsha brake controllers. However, I recommend the Tow-Pro Liberty Brake Controller # RED24FR from Redarc.
The main unit of this brake controller mounts out of sight so only the control knob is visible. This keeps it out of the way in the cab of your vehicle and also provides a sleek OEM look.... view full answer...
If you have the same Rhino-Rack roof rack parts # RRVA137B-2, # RRRLKVA, and # DK360 like we installed on a similar 2017 Hyundai Santa Fe then that would mean your 2500 Series Legs have about 40-1/2" of space between them.
With this being the case you can either use the Rhino-Rack 38" Long Fairing # RRRF2 or the Inno 40" Long Fairing # INA261. view full answer...
The Thule WingBar Evo Crossbars - Aluminum - Silver - 47" Long - Qty 2 # TH711200 requires Foot Pack # TH460R and Fit Kit # THKIT4093 if you have the flush roof rails on your 2020 Hyundai Sante Fe. This system has a weight capacity of 130lbs. I attached an installation video for you to check out. view full answer...
There are three wiring harnesses available for the 2009 Santa Fe. If your vehicle is equipped with the tow package, use part # 118258 that would plug into the the existing factory connector under the vehicle.
If your Santa Fe was not equipped with the tow package, you can use either the Tow Ready # 118415 or the Curt # C56078. Either of these harnesses would connect inline with the factory harness behind each tail light assembly.
I will link you to install instructions, as well as an... view full answer...
Go To Results