All of the roof top tents we carry require aftermarket crossbars like the Yakima Roof Top Tent part # Y07436 so for your 2016 Honda Odyssey that has a factory roof rack you would need to install a set of crossbars like the Malone AirFlow2 part # MAL84AR which would attach to the raised rails on your roof. There isn't a way to safely attach a tent to your OEM crossbars. view full answer...
You only need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 if your Crosstrek does not already have a 4 pole at the back. If you already have a 4 pole, then you'll just need # ETBC7 and you'll be set. view full answer...
Hi Steven,
Yes there is a grommet for the hole you are referring to on the Replacement Front Cover for Solera Power RV Awnings - Regal Drive Head # LC643922.
Per the manufacturer, what you need is the Replacement Manual Override Grommet for Solera Powered RV Awnings # LC95ED. view full answer...
According to the owners manual for your 2020 Chevy Equinox it appears you are going to be limited to a trailer weighing up to 1,000lbs when you do not have trailer brakes. I have included a snip image from your manual that shows most can only tow up to 1,500lbs with trailer brakes. If you have the 2.0L with the V92 provision then it can tow up to 3,505lbs with trailer brakes. As you only have a 4-way the 7-Way Kit # ETBC7 will provide you with the connector and wiring needed to step up... view full answer...
Thanks for reaching out, Bruce!
The Convert-A-Ball Interchangeable Ball Set # 902B comes with the 2-1/4" standard shank length so it's the kit you're looking for. The XL kit, part # 105TB, comes with a 3" shank length just or reference.
Then to wrap up the rest of the parts you asked about you'll need the Storage Case # 004B and the Cover # 005B. view full answer...
Yes, the Curt Spyder Goooseneck/Fifth Wheel Adapter part # 16085 does come with the needed pins to secure it to your fifth wheel rails. view full answer...
I confirmed with Rhino-Rack that the legs of your Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B will be compatible with the mounting channels on the bottom of the Rhino-Rack Pioneer Platform Roof Tray # RR95TB. This will allow you to skip using the crossbars and keep your height lower. view full answer...
Hey Stephen. In addition to the Westin Fey Diamondstep Rear Bumper, you will also need the Custom Installation Kit # 97900. This kit will contain all of the brackets and hardware needed to install the bumper.
For a 1989 Jeep Comanche, the correct Westin Diamondstep bumper will be as follows:
- Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel # 63000 view full answer...
Hi Rick,
We do have the correct Curt 5th wheel brackets that fit your 2018 Ram 2500, though it's a different part number than the one you mentioned. The correct brackets are the following:
- Curt Custom 5th Wheel Bracket Kit for Ram Truck # C16427
Also keep in mind the # C16427 will only work with Curt base rails - part # C16104 or # C16204 - and will not work with any other manufacturer's base rails.
And just in the interest of being thorough if you happen to need a 5th wheel wiring... view full answer...
Hey Tom, we have just what you are looking for with the Curt ball mount part # C45002 which is a dual ball setup like you mentioned that has a 2 inch ball on one side and a 2-5/16 inch ball on the other side. view full answer...
Hey Rick, yes the Furrion Pure Sine Wave Inverter part # FIVBDP10A that you referenced can be used with a 100 amp hour Lithium battery. view full answer...
For the Curt Turning Point Pin Box you'll need the 5th Airborne Custom Wedge for Select Series Fifth Wheels item # SWW-03. This works great with Reese 5th Wheel Hitches like Item # RP30047. view full answer...
Hey John, so it's probably possible on some level to take apart the Venline EZ Lift Ventadome part # V3094-601-00C and reinstall just the components needed to convert yours to having a fan but we don't know exactly how to pull it off. view full answer...
To tow a jetski trailer with your 2019 Ford Mustang Fastback you will need a hitch, wiring harness, ball mount, and hitch ball 2" or 1-7/8". I have listed these parts below along with any installation videos we may have:
Trailer Hitch - Draw-Tite item # 24928
Wiring Harness - Curt T-Connector item # C56088
Ball Mount - Draw-Tite Drawbar item # 3593
Hitch Ball - 2" Hitch Ball item # 19258 or 1-7/8" Hitch Ball item # 19256 view full answer...
Hey Tommy, thanks for reaching out!
If you look around you'll see a variety of ways to get your truck setup for both 5th wheel and gooseneck towing, but out of all the available options I highly recommend the B&W setup that includes the following parts for your 2023 Chevy Silverado 3500:
- Gooseneck Hitch # BWGNRK1020
- 5th Wheel Hitch # BWRVK3500
I really like this setup because it gives you a gooseneck hitch that is easily hidden when you aren't towing, and then that also serves... view full answer...
That is because the parts you're looking at are not designed for the Lippert Ground Control 3.0. What you need is the Replacement Front Jack # LC362485. view full answer...
Hi Huy,
You can start out with the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR and then use the add-on TopShelf # Y94VR in order to haul a second cargo box # Y44VR or another accessory later on when you need it. view full answer...
The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB you found is going to have the 3 wires which run down each side of the trailer. One wire on each side is going to be a ground wire(white), the 2nd wire(brown) is going to be for the running lights and side marker/clearance lights and the 3rd wire(green or yellow) is going to be for the turn signal/brake lights for each side of the trailer. The Optronics LED Combination Trailer Tail Lights # TLL160RK are submersible and the correct size needed... view full answer...