The replacement rear ratchet clip for your Yakima FrontLoader, part # Y02103, is here. It's the Replacement Rear Wheel Tray, part # Y8880845. view full answer...
The Replacement Cover # 852-2382001 is the correct part for both styles of the Thule Podium foot pack so it will work for the 460 for the square crossbars or the 460R for aero-style crossbars like what you have. view full answer...
The most cost-effective option I can recommend to you for repairing the broken glass on your 2014 CR-V's driver-side mirror is a product from CIPA, their Cut-and-Stick Acrylic Replacement Mirror # CM01100. This item is a 7 x 10-inch sheet of flexible acrylic mirror that includes an adhesive backing. You simply cut it to shape to match your existing mirror's glass and press on to install.
If you prefer to replace the mirror entirely you can click on the link provided to see the K-Source... view full answer...
Curt does a really good job on the hitch side of things but when it comes to the electronic side of things they are definitely not my first choice simply because we tend to have more issues with their wiring simply giving out like what you experienced than with other brands.
For your 2014 Honda CR-V I recommend replacing the Curt # C56158 with the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118561 because we have found that the Tekonsha wiring tends to be... view full answer...
For replacement hardware for a trailer hitch you will need # RHK. You will need to enter the hitch number in the area provided on the RHK page and then select the manufacturer, Curt, in the bow below where you entered the part number. Then our team will assemble the correct hardware. Current pricing is available on the RHK page. view full answer...
The hardware used to mount the Draw-Tite # 75742 are hex bolts with measurements M10 X 1.25 X 30 CL8.8. You can also get this hardware kit by putting that hitch model number on the page for our Replacement Hardware Kit # RHK and receive the correct mounting kit that was damaged during install.
As a note to address the question about the differences in mounting hardware, it does appear that both of the Draw-Tite hitches- Class II and Class III use the same mounting hardware. view full answer...
You could install the locking knob without using the key on the SportRack Spare Tire Bike Rack, # A30813STL, but you would not be able to lock the bike rack to your 2005 Honda CR-V.
If the lock core on your bike rack has a 4 digit number that begins with the letter N, then you could order replacement keys using that 4 digit number. If you use the link to the page I provided, link I have provided, you can enter in the 4 digit key number on that product page and order as many keys as you... view full answer...
Most of the breakaway switches from ESCO are part number LBS48-16. We do not carry any of the components for that switch.
If you are looking for a replacement switch the Hopkins Replacement Break-Away Switch # HM20014 would work well for you. Since switches are basically universal, this will work.
I have attached links to a couple helpful articles about breakaway switches you can check out. view full answer...
A trailer hitch from a 2002 Honda CR-V will also fit a 2004 Honda CR-V like the Draw Tite hitch part # 75690.
We do sell the replacement hardware as well. For that you'd want the part # RHK.
On the product page you would need to enter the part number of the hitch you have as well as select the manufacturer and we'll ship you out what you need. view full answer...
I spoke with my contact at Thule and the Easy Rider trunk mounted bike rack was discontinued back in 1995 so the replacement straps are no longer available but I do have a solution. You will just need to update your cradles by using the T3 Cradle Body, # 853-5829, and then use Rubber Strap, # 753-3535. These are sold individually so you would need 6 of each.
A quick tip that we have found to work well when installing new cradles on a bike rack is to grab a can of aerosol hair spray. You'll... view full answer...
Yes, we do have a hardware kit available for Draw-Tite Trailer Hitch # 24790. You will need part # RHK. Under the box that says Shipping Special, enter the hitch number (24790). Then select Draw-Tite from the manufacturer pull down menu. Next, click the Add to Cart button. That is all there is to it.
I have also included a link to the installation instructions for this trailer hitch below. view full answer...
For a 2,000 lb axle, the Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823 is the most standard size grease seal. You may want to use a digital caliper like # PTW80157 to confirm these dimensions match your hub and spindle. I've attached a video to assist. view full answer...
For your 2004 Honda CR-V and Thule Spare Me bike rack, we have replacement mounting plate # 753-3532. We also have a long mount bracket # 752-1425-002 if you need one of those as well. view full answer...
For a replacement key you'll need Replacement Key for Thule and SportRack Racks and Carriers - N2854 # THKEYN2854 but you'll want to choose the correct key based off the number on your lock. I've linked all of the available keys to this answer that you can search to see if there is one that matches the number on your key or lock.
If you wanted to replace the knob and lock mechanism you can use the Locking Knob with Bolt for SportRack Single-Arm, Hitch-Mounted Bike Carriers # SR0018.
If... view full answer...
The Replacement Mounting Kit for the Yakima PowderHound and FreshSesh, part # Y8860040 is compatible with the OEM crossbars on your 2017 Honda CRV. view full answer...
The conical toothed washers that come with the Draw-Tite Hitch # 75742 will indeed be 1/2 inch. If you end up missing or needing more than just the washers, we do offer the Replacement Hardware Kit for Trailer Hitches # RHK that will replace all the hardware from any hitch we currently carry.
All you need to do is enter the hitch part number ( # 75742 ) and the manufacturer from the drop down and we can get you all the hardware that would have been included with the hitch. view full answer...
According to Saris the adapter part # SA3032 is designed to fit all of their bike racks that have shanks for a 1-1/4 inch hitch to convert them to a 2 inch hitch.
There will be a bolt hole right next to the hitch pin hole of your # SA4412B. That is where the bolt goes. See picture. view full answer...
The Roadmaster Direct-Connect Base Plate Kit part # 1541-5 works with the "knuckles" on Roadmaster tow bars like the Roadmaster Falcon 2 Tow Bar part # RM-520. If that looks like what you have then the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS is what you need.
You will need to order them specific to the base plate you have which is the part # 1541-5 listed above you will need this for the order form.. view full answer...