Replacement Grease Seal for Rockwell American 2K Spindle
Question:
Is it possible to replace the spindles on this axel with a flanged spindles so I can add brakes?
asked by: Tom S
Expert Reply:
For a 2,000 lb axle, the Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823 is the most standard size grease seal. You may want to use a digital caliper like # PTW80157 to confirm these dimensions match your hub and spindle. I've attached a video to assist.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Measure to Find Replacement Grease Seal Based on Inner and Outer Diameters
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Article: Most Popular Wheel Bearings
- Q&A: Possible Bearing Buddy that Could Fit Hub with Seal 12194TC
- Q&A: Replacement Trailer Hub Seal for TCM 12194TC
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is The Outer Diameter of The Dexter Trailer Idler Hub Assembly # 8-258BTUC1?
- Q&A: Replacement Grease Seal 4410275 For Shoreland'r Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
Tom S.
11/9/2017
Is it possible to replace the spindles on this axel with a flanged spindles so I can add brakes?