Hey Kyle,
While we have a similar coupler lock that can be keyed alike, the Flint Hill Goods Trailer Coupler Lock - 3-3/8" Span # FHG82VR cannot be ordered keyed alike.
To get six keyed alike coupler locks you can use the etrailer Surge Brake Coupler Lock - 3-3/8" Span # e98888.
Just use the "Keyed Alike" option on the drop down on the product page and the quantity you want and they'll be keyed alike. view full answer...
Hi Glenn,
The 100 psi will not make a difference regarding the 1,500 psi Dexter BrakeRite Electric Over Hydraulic Actuator for Disc Brakes # DX82KR.
Trailer disc brakes have a max operating pressure of 1,600 psi, so the 1,600 psi EOH actuators are generally rated just to meet that max pressure, but it won't matter regarding the function of the # DX82KR. This is a very nice option for an actuator, giving a much faster response time than other actuators to get optimal braking right away. view full answer...
Hi Corey; the BAKFlip MX4 Hard Tonneau Cover # BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 # EX94430 weighs 35 lbs and so does the Trifecta 2.0 # EX92430. If it was a Solid Fold 2.0 it is approximately 65 lbs. view full answer...
There isn't any real difference between the Curt Trailer Hitch Receiver # 13535 and the Draw-Tite Max-Frame Trailer Hitch Receiver # 75690. The only real difference is that the Curt # 13535 sits a hair more recessed measuring 8 1/2" from the hitch pin hole to the edge of spare tire, compared to the 8 3/4" the Draw-Tite # 75690 has.
Other than that, both of these hitches have the same 350 lb tongue weight capacity, as well as the same 3,500 GTW capacity. view full answer...
The Hollywood Racks Trail Rider Bike Rack # HR200Z can carry 2 bikes up to 45lbs per bike. Do understand the 45lbs is per bike so if you had a 20lb bike it would not mean you could also carry a 70lb bike for the difference. view full answer...
Hello Ted; the difference between the Curt # C13397 and the etrailer # e98848 is the finish. The Curt has a standard glossy finish while the etrailer features a unique matte black finish. Outside of this the two hitches are identical. I prefer the matte black options since it helps hide dirt and also has more of an OEM look. Both have a concealed cross tube so the only thing you will see hanging down below the rear bumper is the receiver tube. view full answer...
Hey Chi, thanks for reaching out!
The Swagman XTC2 TILT Bike Rack for 2 Bikes # S64671 doesn't have provisions for adding more trays, but I do have some alternative options for you.
For a bike rack that has a similar design and operation I recommend the Hollywood Racks Sport Rider SE Bike Rack for 4 Bikes # HR1400Z where the main differences include the ability to remove the 2 outermost trays (as one piece) and it has a 2" shank instead of the 1-1/4" to 2" adapter that the XTC2 has.
For... view full answer...
Hey Jason,
The only thing I can think of that may work for you, depending on what you have now, is the CE Smith Winch Stand # CE31013G.
The stand mounts on a 2" wide trailer tongue and while it is 30" tall it can be mounted at different angles for different heights. view full answer...
To answer your question plainly Jeff, no, cutting of the fascia is not truly required. This is only required on the EcoHitch and HiddenHitch options because they are marketed as a "hidden" type of hitch. So, they're going to sit farther back compared to a standard hitch hiding the cross-tube, giving you the "from-the-factory" look.
If that is not a deal breaker for you, then I'd just go with the Curt # C13416. It is virtually the same as the Ecohitch, it's going to stick out more and... view full answer...
The Montague Paratrooper Highline part # HIGHLINE20 is a 20 speed bike with 27.5 inch wheels whereas the Montague Paratrooper Pro part # PROBLK16 is a 27 speed bike with 26 inch wheels and has a rack over the rear wheel. So they are pretty similar but there is some distinct differences.
Some argue that the 27.5 inch wheel is a faster bike since less rotational inertia and a longer footprint which helps provide more traction and stability. view full answer...
Trailer wheel and tires like the part # AM32545 do not get balanced as it really doesn't make a difference and most of the time the weights just get bounced off due to the rougher suspension on trailers compared to vehicles. So if you wanted to you could balance them locally but you'll probably find that the guy doing the job will say they are too out of balance for him to get it all the way. We do not have this tire available on a black wheel either. view full answer...
Hey Mark, thanks for reaching out!
The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001 has a Zinc coating which is similar to a galvanized finish, but the Zinc coating is more smooth than what you'd find with a galvanized finish.
I confirmed this with my contact at Ultra-Fab. view full answer...
The actual locking mechanism is the difference. The Trimax Heavy Duty # TMX42ZR has a much more robust hardened steel lock while the Trimax # TMX65FR uses a tube key style lock for the main lock. view full answer...
For a ball mount with a 1" shank hole similar to item # C45310 you will want the Curt Ball Mount for 2" Hitches item # D-4. This ball mount has a 3/4" rise, a 2" drop, and extends out slightly farther at 10-1/4" long. view full answer...
The only difference between the two covers is the color/finish. The # PE87UV is black and the # PE69UV is matte black. Everything else about them is identical. So really the choice comes down to which color you would prefer to have on your 2023 Ford F-150 w/ 5-1/2' bed. view full answer...
Yes, you should be placing a layer of rubber or sealant between the E-Track item # E19148 and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals. view full answer...
The DeeZee Specialty Series Trailer Tongue Tool Box # DZ91717 is 0.056" thick. The UWS A-Frame Trailer Toolbox # UWS01065 is 0.058" thick. view full answer...
Hey Peter,
It's totally normal for hangers to have either different heights or mounting hole positions; for example, the center hanger of the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # APT7 is longer than the other two hangers. This is to ensure the suspension is as level as possible, as the straps make up the difference. view full answer...
We do not carry the fv807358 but it looks like the only thing different from the Dometic FanTastic 7350 Series Upgrade Kit item # FV807359 is the color. Colonial white for the fv807358 and your standard white for our item # FV807359. view full answer...