We have just what you would need to adapt the Roadmaster base plates on your 1997 Geo Tracker to your Blue Ox tow bar. If the arms of the base plate are removable you would need the part # RM-032 or if the arms of the base plate are not removable you would need the part # RM-033.
The removable arm kit for your vehicle is the part # 1007-2 and the permanently mounted arm kit is the part # 118-15 in case you are unsure what you have. view full answer...
The Roadmaster Classic Base Plate Kit - Fixed Arms # 118-1 or the Roadmaster XL Base Plate Kit - Removable Arms # 118-3 are confirmed to fit your 1995 Geo Tracker. Either will work with your Quick Disconnect Plate on your Roadmaster Falcon Tow Bar. With either base plate, you will need to buy the complete base plate to utilize your quick disconnect plate and your Falcon 5250 tow bar.
Let me know if you'd like help with the wiring, supplemental brake system, or other components for your... view full answer...
Your vehicle is too old for me to be able to pull up the owners manual online, but if you check the owners manual in your vehicle there should be a section about recreational towing that details whether or not your vehicle can be flat towed and all the steps needed to be taken.
For fixed arms that will always be visible at the front of the vehicle but that also cost less, use # 118-1. For base plates with removable arms but cost more use # 118-3.
Next you will need a compatible tow... view full answer...
I may have a solution for you, however the Bestop Duster Deck Cover # B9002915 referenced in your question is not confirmed to fit your 1993 Geo Tracker. It looks like there are enough differences between the 1993 and 1995 model Tracker that this particular cover is not compatible.
For your 1993 Geo Tracker we do have the Bestop Strapless Bikini # B5257015 which is confirmed to fit and will work well. This will replace the factory-original top on the vehicle to provide a canopy over the... view full answer...
If your tow vehicle, the motorhome, has trailer wiring on it already it has the circuits combined as that is the standard way trailer wiring is ran.
That means that for a diode wiring kit for your 1995 Geo Tracker the part # RM-15247 would fit and be exactly what you want without needing any further wiring or adapters. view full answer...
The # RM-732 is the correct adapter to use to go from a separate taillight system like what you have on your motorhome to a combined system like what is on your tow dolly.
For wiring your motorhome with a 7-way you would basically want to follow the wiring directions that are on top of the converter. The right side of the converter is the input side so you will need to test the wiring of your RV with a circuit tester like part # PTW2993 to determine function and wire it accordingly. You'll... view full answer...
Yes, Roadmaster base plates # 118-3 will fit your 1992 Geo Tracker 2-door 4x4. For a compatible tow bar I recommend the Falcon 2 # RM-520. I have linked a video review of this tow bar for you. For safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use a simple kit such as # RM-2120. this kit bypasses the Tracker wiring so you won't have to splice into the tail light wiring.
You may also need a high/low adapter to keep the... view full answer...
I do have an option for you but they do not offer an aftermarket plug in trailer wiring harness for your 1995 Geo Tracker because it is just not that popular of a tow vehicle. Instead, the only way that you can install a 4-way trailer connector on your Tracker is with a hardwire kit for which I recommend using the Curt Circuit Protected Converter part # C56175.
The Curt Curt Circuit Protected Converter only requires four wires to be spliced into the vehicle so the install process is fairly... view full answer...
For trailer wiring for your 1989 Geo Tracker we have universal kits like the part # 119178KIT which are a confirmed fit. This brand is the most reliable of the options available for your vehicle though. view full answer...
I was not able to find a replacement light assembly based on your provided number, 50010. A check with my contact at Wesbar reveals that they no longer have this light product; it was discontinued about 15 years ago. The light was a 4 x 4-inch unit according to my contact.
The closest thing we have would be the part # 2823283 for the LH side and part # 2823284 for the RH side. view full answer...
You would need to have an all flat metal bumper on your 1996 Geo Tracker for the Curt tow bar part # C19745 to be able to connect. Since your vehicle does not have that you would need to go a different route.
You would need to install a base plate kit. For that you would need the part # 118-15. For a lower priced tow bar we have the Roadmaster part # RM-020 which would be an excellent option.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For... view full answer...
Bascially, the Roadmaster Base Plates, # 118-1, will attach flat to the frame on the front of your 1993 Geo Tracker. We have not yet had the opportunity to install the base plates on a vehicle so we do not have pictures at this time. These base plates are what are called fixed brackets so they will always be visible on the vehicle. I recommend going with the XL style, # 118-3, which has removable arms, but otherwise install the same way.
There are several other parts you will need to safely... view full answer...
For your Duncan Towmatic II Stowbar, The RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 will allow you to connect to the Roadmaster XL Base Plate Kit - Removable Arms # 1012-1 that are a fit for your 1999 Tracker. I recommend using Loctite Threadlocker # LT37420 for this install.
I also recommend you use the RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs # RM-643 for this application.
For your tow bar wiring, I recommend the... view full answer...
I have a possible solution for you but the trailer hitches for the 1991 Geo Tracker are Class I trailer hitches. All of the enclosed cargo carriers including those from Rola will only fit in Class II and/or III hitches.
What you can do is use a Class I rated regular cargo carrier such as # C18110 and then use a cargo bag such as # e98990. Then you could use Rightline cable lock # RL100640 to lock up the bag. It isn't exactly the same as a hardshell carrier but it will work! view full answer...
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
This kit can be installed on vehicles like yours that have the stoplights and turn signals on the... view full answer...
The correct mount kit for your 1992 Geo Tracker to use your Snowbear Plow part # SB324-167 is the part # SB397-050 that you referenced. This kit is custom fit for your vehicle and is designed to work with the Winter Wolf as well. view full answer...
Yes, from what I see your 1996 Geo Tracker does indeed have a separate wiring system. But wiring harness # HM41245 is designed only for the Tracker to tow a trailer and not for the Tracker to be towed behind an RV. You will need a different wiring harness.
There aren't any vehicle specific tow bar harnesses that will plug into your Tracker so I recommend using a diode kit # RM-154. This will make it so that the lighting will be done by the Tracker's tail lights (powered from the RV via... view full answer...
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
I also attached a link to all of our help articles on flat towing lighting as well. view full answer...
Does you 1997 Geo Tracker have a Blue Ox Base Plate kit # BX3508 for a 2-door or part # BX3505 for a 4-door installed on it?
If so, then to use a Roadmaster Sterling Tow Bar # RM-576 you will need to also use the # RM-031-5 that you referenced. Since the serial number of your tow bar is above 14,501 this adapter will fit. view full answer...
Go To Results