We do offer some TorkLift SuperHitch fits for 2500 or 3500 model 2007 GMC Sierra New Body trucks, but the # TLF1008-30 you'd looked at is a fit for the 2017-2021 Ford F250, 350 or 450 and wouldn't fit your Sierra.
If you have a long bed truck, the # TLC1205-30 SuperHitch Magnum which features a 2 and a 2-1/2 inch receiver will fit.
If you have a short bed truck, the SuperHitch # TLC1206 which features 2 stacked 2 inch receivers would be a fit for you.
I've linked to an install video... view full answer...
Since you have a short bed (6-1/2') on your 2007 GMC Sierra 2500HD, you will need a rolling hitch or more commonly referred to as a sliding 5th wheel hitch for your 397 Heartland Edge Toy Hauler to make tight turns. The general rule of thumb is that if you're towing a 5th wheel trailer with a truck that has a bed shorter than 8' then you will need a sliding hitch to gain clearance between the trailer and the cab of your vehicle while turning to prevent them from contacting one another,... view full answer...
From your photos it looks like you have the Class V Curt Hitch part # C15323 for the 2003 Sierra 1500. The Curt Trailer hitch part # C15323 fits both the 2003 GMC Sierra 1500 and the 2007 GMC Sierra 1500 Classic so you can use this hitch on your newer Sierra.
However, I highly recommend to change the hardware with part # RHK. Go to the product page and put in hitch number C15323 to order new hardware because the bolts are one time use. view full answer...
The cable part itself you can use from any brand but the pin might be different. If the pin is fine on your breakaway kit and you just need a cable we do carry cables by themselves # RM-8603
I have also included a link to all of the cables with pins that we carry. The cable and pin you referenced, # 3802350, is designed for Bright Way breakaway switch 3802308. view full answer...
You're correct that you need 5th wheel replacement steps to extend down from the mounting point the same distance as the original steps do. This will avoid loss of ground clearance which is an important safety consideration.
Trailer makers typically do not provide detailed specs on components such as steps that are used in their products but you can use the linked page to see our range of 4-step scissor steps. Brophy step # AS24 is 24-inches wide like yours, offers a 7-7/8-inch step height... view full answer...
I have a solution for you, but the Draw-Tite # 65028 is not a fit for your 2007 GMC 2500HD. Instead you'll need the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65050, which is confirmed to fit on the 2007 GMC Sierra 2500HD.
I've linked a review and installation video of this hitch for you as well. view full answer...
The Firestone Ride-Rite Air Helper Springs # F2430 are not compatible with an in-bed hitch like what you have for 5th wheel towing with your 2007 GMC Sierra 1500 4X4, but I do have some other air suspension solutions from Air Lift for you.
If you occasionally tow your 5th wheel with your GMC Sierra then you need the kit # AL57204 for a bed shorter than 8' (won't fit with a B&W 5th wheel hitch ) or kit # AL57211 for an 8' bed. If you tow your 5th wheel pretty often then you need kit # AL88204... view full answer...
The MORryde RPB72-770-06 Pin Box you have is a Fabex 770 bolt pattern so the Trailair Air Ride 5th Wheel King Pin # UF35-946212 that you linked to will be a compatible fit. This air ride pin box will offer you smooth, stable towing with your fifth-wheel trailer by replacing your ordinary pin box with an air-ride-equipped model. The scissoring action of the coupler allows the interior air bag to absorb road shock so that you won't feel it.
When you encounter uneven terrain on your trip... view full answer...
Your ability to negotiate turns with the rack installed will depend on the length of your trailer tongue. The arms of the Valley Hitch Mounted Towing Bike Rack, part # V91150 extend about 18-1/2 inches back from the upright portion of the carrier. The length of the handlebars on the rearmost mounted bike will extend this a bit.
With this information, you should be able to determine if you will have any problems making turns with the bikes attached to the carrier. Unless your trailer has... view full answer...
As long as the B&W gooseneck hitch is compatible with a 2-5/16" hitch ball, then yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G will work for you. To secure this adapter, I recommend using the Master Lock Covered Solid Body Padlocks part # 141T. If you do not already have a 2-5/16" hitch ball on your B&W gooseneck trailer, I recommend using the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitch part # BWGNXA2006. view full answer...
Yes, the Brophy Camper Hold Down, # HSSF, will work on your 2007 GMC Sierra 1500 Crew Cab. This is a universal fit item and will support any size camper that is designed to fit your truck.
The hold downs will wrap around the bed rail and mount inside the bed. If you have a bed liner that blocks the inside edge of the side rail, then you may need to modify the bed liner to fit this hold down.
I have attached a photo showing how this hold down installs on a truck.
You may also be interested... view full answer...
The 6.90/6.00-9 tire size is the same as your 6.00-9 tire size. Trailer tire sizing went through a change in the way the sizes are listed, and the 6.90/6.00-9 size lists both the newer and older sizes in order to indicate that the tire will work as a replacement for both tire size listings.
The only 6.90/6.00-9 size tire we offer is the Kenda Loadstar K364 Trailer Tire # AM10040. view full answer...
In order to mount a ladder rack on a 2007 GMC Sierra 2500 6.5' bed with tonneau cover you'll need to use one that mounts in the stake pockets. The best options we have for this are listed below.
Adarac Custom Truck Bed Ladder Rack part # A70530
Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A79FR
Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-501
I recommend the TracRac SR because of its adjustability but the others are great options as well. view full answer...
I do have an option for you but Kat's does not make an Engine Oil Dipstick Heater like part # KH15200 long enough to work for your application. The above dipstick heater is for smaller vehicles and would not work well for your 2007 GMC Sierra.
A better option for you would be to use a pad heater like the Kat's Heaters Heating Pad part # KH24150. The heating pad can be placed on either your vehicle's oil or transmission pan. The heater will be much more equipped for your truck as it is... view full answer...
I can confirm that the Curt Trailer Hitch Receiver # C15703 is indeed a fit for your 2007 GMC Sierra 3500 long bed dually. Please note that if you have the factory hitch, it will need to be removed in order to install this hitch.
I have added a link below to a video review for you to check out as well of the Curt Trailer Hitch Receiver # C15703. view full answer...
The correct choice of camper tie-downs for your 2007 GMC Sierra 2500 New Style with 6-1/2-ft bed will depend on whether it is equipped with running boards and on what type of hitch is installed: factory, aftermarket or Torklift.
The link provided will take you to our main page for tie downs for your truck. The drop-down 'Select Vehicle Style' menu at the top of the page will let you select your particular truck's configuration to see compatible tie down kits.
For example, if your truck... view full answer...
The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500 would not work with a Blue Ox gooseneck on your 2007 GMC Sierra 2500. In order to use the Companion you would need to install the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1067-5W. This install kit also serves as a gooseneck hitch and is a confirmed fit for your '07 Sierra New Body Style.
I've added links to video reviews and installs of both parts for you to check out. view full answer...
I do have a ladder rack that will work with the Access tonneau cover on your 2007 GMC Sierra New Body but the TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-501 will not work with your current Access tonneau cover as the tonneau cover uses the same space needed to attach the base rails on the TracRac SR.
For a ladder rack that will work with your Access tonneau cover, I recommend taking a look at the Adarac Custom Truck Bed Ladder Rack part # A70530. The Adarac has adjustable... view full answer...
If you are using the pigtail wiring harness # 20127 to connect the Tekonsha Voyager Brake Controller # 39510 to the wiring in your 2007 GMC Sierra New Body, you can use this same harness to connect the Tekonsha Prodigy P3 # 90195. The harness is compatible with both brake controllers. You will be able to simply unplug the Voyager from the harness and replace it with the P3. You will not need to reconnect any of the bare wire connections that you already made with your vehicle wiring.
The... view full answer...
The only B&W trailer hitch receiver we have for your 2007 GMC Sierra New Body 1500 is the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25217. As long as you have the standard rear bumper and not the deep 10" drop bumper then this hitch will work well for you.
The B&W Heavy-Duty Trailer Hitch Receiver is a Class V hitch with a 2" receiver tube opening. It comes with all hardware and everything you will need for installation. I have attached an install video of this hitch on a similar... view full answer...
Go To Results