If your 2001 Chevy Silverado is a Light Duty model we have a couple of front mount hitches that will fit the Curt # 31302.
If it was a 1500 Heavy Duty model then you would use # 65028 or # 31108.
The differences between the LD and HD models of the 1500 require different hitches for each. view full answer...
I might have a solution for you. However, unfortunately, we do not carry a heavy duty hitch that is designed to bolt to the frame of the a 1991 Ford F-700 truck.
We carry the Draw-Tite Ultra Frame Hitch, # 41990-07. This hitch will fit heavy-duty and commercial frames the measure up to 44 inches wide. The hitch is designed to be welded on to the trucks frame. This hitch has a gross trailer weight capacity of 16,000 lbs and a tongue weight capacity of 1,600 lbs.
Draw-Tite also has this... view full answer...
We do have some locking hitch pins that are compatible with the Curt Heavy Duty Forged Ball Mount for 3" Hitches # C52JR! Out of our selection I recommend picking up the Fastway Trailer Hitch Receiver Lock # FA86-00-3160 which comes with 2 barrel-style keys (which makes them much harder to pick or drill) and it is backed by a limited lifetime warranty so you can be confident this will last a long time. view full answer...
We have numerous Class V hitch options for your 2002 Ford F-250 Super Duty. I have listed them below.
Curt Trailer Hitch, # C15410 2 inch receiver
Curt Trailer Hitch, # C15810 2-1/2 inch receiver
Draw-Tite Trailer Hitch, # DT45508 2-1/2 inch receiver
B&W Heavy-Duty Hitch, # BWHDRH25230 2 inch receiver
Tork Lift Trailer Hitch, # TLF1002 2 inch receiver
Tork Lift Trailer Hitch, # TLF1002-30 2-1/2 inch receiver
I have included links to the instructions for the hitches below. You can also... view full answer...
We do offer a specialized heavy-duty zinc hitch pin (with grip handle and included clip) for use in 3-inch hitch receivers such as the Super Titan 3000 Weld-on Trailer Hitch with 3-Inch Receiver Opening # 38023. The pin part number is # 58388 and it has an overall length of 6-inches. The linked video illustrates. view full answer...
The Curt 21K Heavy Duty Forged Ball Mount # C45432 is intended for extra-heavy-duty 3-inch hitch receivers. It does have the 8-inches of drop you need, but we have similar ball mounts in the 2-1/2-inch hitch size you require and you can see these on the linked page. We have both fixed ball mounts as well as adjustable ball mounts like Flash E Series # FA42-00-2825. view full answer...
The Curt Multipurpose Ball Mount, part # D210 is the most heavy-duty ball mount we offer for that design.
The # D210 is designed for a 2-inch receiver opening and has a tongue weight capacity of 750-lbs with a towing capacity of 7,500-lbs.
If you need a hitch ball for the mount I recommend part # 63845 for a 2-inch hitch ball, and part # 63847 for a 2-5/16 inch ball. view full answer...
We do indeed offer hitches that are compatible with a 1993 Chevy C/K Series with a roll pan bumper.
I'd recommend the Draw-Tite # 41522. This hitch is compatible UNLESS your truck has the heavy duty-suspension or is a 4 door crew cab. You'll need to cut a hole in the roll pan behind the license plate for the receiver to pass through the roll pan. . view full answer...
The B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25600 is going to be the best overall hitch for your 2018 Chevrolet Silverado 2500HD work truck with the 8' bed. This receiver is rated for up to 1,600lbs of tongue weight and 16,000lbs of trailer weight with or without a weight distribution hitch.
In the event you are using a slide in camper or need an extension the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLC1211-30 is going to be the best option. This will make it easier... view full answer...
The Ultra-Fab 2-Inch Bumper Mount Hitch, part # UF35-946401, is only available with a 2-inch receiver opening. All of the RV bumper mount hitches will have a 2-inch size receiver opening.
Trailer hitch receiver sizes are available in three different sizes, 1-1/4 inch, 2-inch, and 2-1/2 inch. The two most common sizes would be the Class I and Class II 1-1/4 inch, and the Class III and Class IV 2-inch. The Class V 2-1/2 inch size is used on heavy-duty trucks.
I am including a link to a... view full answer...
I confirmed that the etrailer Trailer Hitch Receiver 2" # e98838 is a fit for your 2023 Subaru Crosstrek. This is a heavy duty 2" receiver, which is the most common size for accessories and ball mounts. I like that the matte black paint helps the receiver blend in and look OEM.
If you plan to pull a trailer then you will want a wiring harness to power the trailer lights. For this, you can use this simple plug-in harness # 118467. For a trailer ball mount, I recommend this handy Etrailer... view full answer...
Looking online it appears the frame used on your 2002 GMC Yukon XL 2500 was also used on the Suburban 2500 and Avalanche 2500 for the model year. I do see a Curt Trailer Hitch Receiver available in a Class IV # 14080 rating but there is not a class V custom fit receiver for any of these models. Do note since we have not confirmed the fit of this receiver on Yukon XL 2500 you may be best going with a Universal Class V Receiver # 15901. While this will require welding onto your frame you... view full answer...
2-1/2 inch hitch opening are used on hitches that are Class V, and are designed to haul large heavy trailers.
In order to reduce your hitch down to a 2 inch diameter opening on your new Ford F-350 Super Duty you would need to purchase a Curt Reducer Sleeve 2-1/2 inch to 2 inch, part # C45405.
You should take note that Ford OEM hitches have a tighter/different radius on their 2-1/2 inch receiver tubes. To accommodate the OEM Ford 2-1/2 inch hitch, the corners of a ball mount, shank or... view full answer...
I have a solution for you. Andersen has the Trailer Hitch Lock # AM3493 that is designed to be used with the Andersen EZ Heavy Duty Adjustable Hitch, #EZ Heavy Duty Adjustable Hitch.
The Andersen hitch lock pin is made of stainless steel with aluminum caps and has a breaking capacity of 30,000 lbs. This lock is designed for 2 x 2, 2 x 2 oversized and 2-1/2 x 2-1/2 inch trailer hitches. view full answer...
We have keyed-alike hitch locks for the 2-1/2-inch hitch on your Ram 2500 that are displayed on the linked page. All of the items shown can be ordered in multiples that are keyed alike. You will just want to confirm the necessary length and diameter to match your hitch accessories.
We have standard pin locks like # e98881 and pin lock sets like # FA86-00-3685 and we also have special vehicle-specific BOLT locks that can be coded to use your truck's key. Part # BL7018448 will code to a... view full answer...
We have the Lets Go Aero V-Lectric FAT PRO Bike Rack for 2 Electric Bikes, # LGA77FR. This is fits Class III, 2" x 2" trailer hitch receivers such as that on your 2018 Mazda CX-5. With this, you can carry 2 e-bikes with this heavy-duty, V-shaped rack with button-adjustable cradles. The rack arms can be removed for storage and 2 anti-rattle hitch pins prevent movement in trailer hitch receiver. The weight capacity of this bike rack is 75 lbs. per bike with a tire width up to 4-1/2". ... view full answer...
It sounds like your Ford F350 has a 2-1/2 inch receiver. If that's the case, I'd recommend the Reese Titan Hitch Box Extension, part # RP45292. The extension will extend the receiver opening 34 inches rearward, but it's designed so that it can be cut down to 24 inches. The 2 inch receiver on the rearward end of the extension would work well with your Aventa tow bar. If the receiver height of the F350 isn't within +/- 3 inches of the base plate tab height of the Wrangler, you'll need to... view full answer...
For your 1989 Chevy C/K Series Pickup I recommend the Curt Class III Trailer Hitch # 13942. This will fit your truck with the roll pan and the only slight modification you will need to do on the bumper is to cut in the license plate area so the hitch receiver can be accessed. Also please note that this hitch will only fit the 1500 models (there is not a hitch available for the 2500/3500 models with a roll pan bumper).
This is a heavy-duty Class III hitch that will provide you with a 2... view full answer...
All of the RV-rated trailer hitches we offer are the 2-inch size and the highest-rated among them are the adjustable frame-mount types like Curt # C13701. This hitch offers 2-inches of drop for its receiver tube to allow for better clearance with the RV exterior. The B&W custom hitch you referenced, part # BWHDRH25122, is not a fit for your F-53-based Mirada and only adjustable universal-fit hitches like the Curt BWHDRH25122are available.
The Curt hitch is rated for 5K GTW and it can be... view full answer...
Trailer hitches are most often available in either a 1-1/4-inch, 2-inch or 2-1/2-inch size, with the largest being for heavy-duty trucks.
We do offer a range of hitch covers for the 1-1/4-inch size hitch that can be seen by clicking on the included link. At this time we do not happen to have a 1-1/4-inch size hitch cover for the Detroit Tigers. I checked with my contact at Great American Products for availability and they currently do not offer one in that size.
We do offer hitch adapters... view full answer...