The grease seal 010-036-00 that you mentioned is our part number # RG06-070 but then for the exact matching oil bath seal with same dimensions you'd want the part # 10-63. view full answer...
Between the Shocker Hitch and Gen-Y Torsion ball mount, I recommend the Gen-Y. Its rubber torsion arms are going to absorb road shock naturally due to its design, while the Shocker Hitch requires constant maintenance that isn't needed with the Gen-Y.
It will improve the ride of your trailer substantially without the added work of maintaining an air bag, and because it the entire ball mount is designed to absorb shock, there isn't going to be stress/fatigue on it like there is on straight... view full answer...
The lug nut cover part # WMRMT9061 is made from stainless steel and could work if you have a 20 mm lug nut on your wheels like the part # WMRMT9063 that this was designed to fit. We do not have anything made from tin though. view full answer...
I did some checking and your 2008 Itasca Merridian is a Class A Freightliner Motorhome so yes, the Roadmaster Reflex Steering Stabilizer # RM-RBK18-RSSA that you referenced would work for you. view full answer...
The best electric brake controller in my opinion is the Tekonsha Prodigy P3 # 90195. This brake controller is a proportional brake controller allowing your trailer brakes to be applied in direct proportion of intensity and timing as you hit the brake pedal in your Freightliner. This controller has an LCD screen that allows you to take code deciphering out of the equation. It will allow your to see at a glance what is going on with your system. This controller is customizable and has 3 preset... view full answer...
It sounds like you are asking if a Solera Slide-Topper like the 12.5' # LCV000177334 that you were looking at can be installed on your Grand Design trailer that features an electric awning already in place. Just let me know if that is not the case.
There are a few possible styles and mounting positions of electric awnings that are used on slide-outs so it will really just be a matter of comparing where your awning is attached to the mounting location of our Slide-Toppers. I have attached... view full answer...
Is your controller in hydraulic mode? Sounds like it may not be based on what you described. The P3 part # 90195 is compatible as-is with electric over hydraulic brake actuators like the Hydrastart # HBA16 but it has to be put in "hydraulic mode" view full answer...
We do have some tire chains that will fit your 11-22.5 tires, but none of the Thule chains will fit.
You can use any of the following chains:
For single wheels (it is permissible to have chains just on one of the wheels on a dually wheel set on each side):
# PWE2247S
# PWE2247SC
# PWH2247SC
# PWH2847SC
# PWH3275SC
# PWE2448S
For both tires on dually wheels:
# PWE4247SC
# PWE4247S
# PWH4247SCHD
# PWH4247SC
# PWH4847SC view full answer...
The Roadmaster RSSP30 you referenced is not compatible with a Freighliner XC chassis. It is designed for the Workhorse P Series Chassis and Chevy/GMC chassis. I do however have an solution for you that is a confirmed fit.
For your 2010 Gulfstream Carribean 35A on Freightliner XC chassis, I recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK18-RSSA. This stabilizer uses a steel spring that is designed to bring you back to neutral... view full answer...
The easiest to install brake controller you could use with your 2012 Freightliner Cascadia 125 would be the Curt Echo Mobile part # C51180 which only needs to plug into an active 7-way and it's ready to be used once synced to a smart phone. view full answer...
For your 2016 Newmar Ventana with the Freightliner XC chassis, the Prodigy P3 # 90195 you asked from is an excellent choice with easy to use features and no codes to decipher. Because you have the 7-way if it came from the factory you would simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3027-P. view full answer...
We have some multi-fit hitches available that could work for your 2008 Itasca Sunrise IFF32H class-A motorhome but we don't have any custom fit hitches that would bolt right up.
The Multi-Fit hitch part # 41990 could work well for you. This hitch has a 16k capacity requires either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. You would need to measure from the frame down on your vehicle to determine which brackets would be the best fit for you. view full answer...
Since your slide out is 92 inches long the correct slide topper you'd need is the part # LCV000168107 which comes with everything needed to install it even a rail. The price is available at the attached product link. view full answer...
The correct hitch for your 2019 Freightliner Sprinter 3500 depends on the wheelbase and bumper. To keep it simple I have two options for you where the only difference is the bumper style.
-Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 (144" or 170" wheelbase with standard bumper)
-Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 (144" or 170" wheelbase with factory step bumper)
You will also need to know the outside to outside frame measurement. If it is 30-3/8" then there are... view full answer...
That's actually what we recommend the most for people towing trailers with electric brakes that have tow vehicles with air brakes. Installing a P2 part # 90885 will allow you to totally bypass having to interface with the air system and will work very well.
Hardwiring a brake controller isn't too difficult. It basically is just a matter of running a few wires. One to the positive post of the battery, one to the ground, one to the trailer connector, and then one to the stoplight circuit.
I... view full answer...
For an air to electric brake controller the Hayes part # HA100400C is the kit you want. This ties into the air brake setup of your Freightliner and will provide an electric signal to control your trailer's electric brakes. view full answer...
I looked and was not able to find any trailer wiring or brake controller wiring for your 2016 Seneca 37ts motorhome which is built on a Freightliner M2 chassis.
You will need to start with a 4-way. For that you would want the # C59496. This will be the base of the wiring setup to control the lighting of the trailer you plan to tow.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install... view full answer...
We can help with a basic 7-way and wiring but we do not have anything that's going to actuate ABS brakes.
You can hardwire in a 7-Way, # HM47210 though. For this 7-Way the white wire is ground, yellow is left turn signal and brake lights, green is right turn signal and brake lights, brown is the tail light wire, red is auxiliary power, blue is output to electric brakes, and purple is reverse lights.
If the turn signals and brake lights are not combined on the same circuits then instead... view full answer...
I do have a great option for you but we do not have a standard front sway bar available for your Freightliner M2 chassis with the 10,000 pound front axle.
What you can use at the front that will still really help with keeping the RV in line and minimizing wander is the Roadmaster TruTrac # RM-TRAC-FM2. This Trac Rod essentially braces the axle to prevent jarring and will control any of that excessive side play during travel. It will install using existing holes in the chassis' frame so... view full answer...
I suggest installing the Roadmaster Reflex Steering Stabilizer # RM-RBK18-RSSA on your 2015 Thor Palazzo. This is a confirmed fit for your Freightliner Chassis and will positively impact steering control during adverse conditions. Staying in control during road edging and crosswinds will now be a breeze. Road fatigue during long trips will be dramatically reduced as well. Be sure to maintain proper air pressure in all tires to maximize steering stability also.
This steering stabilizer... view full answer...
Go To Results