An adapter plate won't be necessary to mount your spare wheel and tire on the Curt Trailer Hitch Mounted Spare Tire Carrier # C31006. As long as you have a 2" receiver on your 2017 Sunseeker Motorhome you will be able to use it without any issues. view full answer...
The Scissor Stabilizer Jacks w/ Handle # TJSCHD-24-4 you referenced are a universal fit so you would be able to use them on your 2017 Forest River Sunseeker 3100SS. It's best to install these in each corner to help maximize their usefulness, but there tends to be quite a bit going on under a motorhome so you may have to play around until you find the best position for them that isn't going to allow them to be hit whenever you're driving around. view full answer...
We do have the steering stabilizer as well as front and rear anti-sway bars for your 2018 Forest River Sunseeker 3170DS, which was built on a Ford E450 chassis. I confirmed these fits with Roadmaster for you; the correct parts are:
- Roadmaster Exact Center Steering Stabilizer # RM47MR
- Roadmaster Front Anti-Sway Bar # RM-1139-176
- Roadmaster Rear Anti-Sway Bar # RM-1139-147
The addition of these three parts is going to do a superb job of keeping your rig centered, helping you enjoy... view full answer...
I checked with Roadmaster, the correct Roadmaster Front Anti-Sway Bar for a 2017 Forest River Sunseeker 3010DS is part # RM-1139-176 which replaces the OEM bar and reuses the factory end links. The Roadmaster Front Anti-Sway Bar part # RM-1139-189 is for emergency vehicle chassis whereas the Roadmaster Front Anti-Sway Bar part # RM-1139-176 is for cutaway chassis which is what you have. view full answer...
I contacted the manufacturer about the fit of the Adco Deluxe RV Windshield Cover # 290-2523. They informed me that as long as your 2021 Forest River Sunseeker is on the Sprinter Chassis then the cover will fit. view full answer...
For your 2014 Ford E-450 RV Cutaway Chassis you will need to use a universal receiver like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver. This receiver is available with 7" Brackets # 41990-07 or 16" Brackets # 41990-16 depending on the height needed for the rear of your motorhome. There is not a custom fit receiver for the cutaway chassis as frame changes and is not the exact same for every motorhome made. view full answer...
I personally have not heard of anyone installing both the SumoSprings Solo Custom Helper Springs # SSR-130-54 and the SumoSprings Maxim Custom Helper Springs # SSR-106-54-1 on their 2013 Forest River Sunseeker 3010DS at the same time. This would technically give you 9,800lbs of load support.
From what I can see there is no reason that you would not be able to use both of these systems. One thing I have noticed is why they say their springs will not provide rear lift a lot of times there... view full answer...
The Ultra-Fab Slide-Out Supports for Motor Homes # UF19-960001 that you referenced have a height range of 16 to 28 inches. So what you would need to do is measure from the ground to the slide out frame and as long as that height is between 16 and 28 inches this will fit and work well.
If you check out the review video I attached for this you can see how these work and where they attach underneath your slide out for more info as well. view full answer...
A bumper mounted cargo carrier isn't going to leave enough clearance for you to tow a Jeep behind your Forest River Sunseeker 2350LE. You would instead need to use a stacked receiver like the Gen-Y # 325-GH-515 in the rise position along with a hitch mounted carrier like the # C18152. The stacked receiver will have multiple receivers so that you can haul the carrier as well as make sure that your tow bar is level between the motorhome and Jeep. view full answer...
For starters, stabilizer jacks are designed for just that, to stabilize. They should not be used to lift a trailer/motorhome. The Lippert Components High-Speed Power Stabilizer Jack part # LC298707 that you referenced is used mainly on travel trailers but there are no exclusions that say it cannot be used on a motorhome. However, you would likely need to customize a set of mounting brackets in order to attach the jack to your motorhome chassis. Also, it does not have an auto level feature... view full answer...
The specs I'm seeing show the 2021 Sunseeker TS 2370 being 26'1" in length so I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Class C Motorhome - Up to 29' Long - Gray # AD34ZR. This cover is rated for use in all climates to protect your Class C motorhome from rain, dirt, wind, and sun.
The top panel is constructed of Olefin HD fabric that blocks harmful UV rays that can cause cracking and fading, beads water on contact, prevents dirt and dust particles from reaching RV... view full answer...
The correct WeatherTech bug shield fit for your 2015 Sunseeker Motorhome on a Ford E450 Cutaway Chassis is indeed the # WT50187. If you click the provided link, you can see an install video. view full answer...
Possibly, but you'd have to measure your current exhaust pipe first. The Replacement 90-Degree Exhaust Pipe for Camco Gen-Turi RV Generator Exhaust System # CAM44812 has the same diameter aside from the shorter end where it gets larger to accept a 1-1/2" diameter pipe which I've shown in the attached diagram.
So if your Generac model 4709 Quietpac 40G uses up to 1 1/2" piping you'll be good to use this as a replacement. view full answer...
I can verify for you that the Yakima bike rack you asked about is indeed able to be used and will work on the back of your motorhome:
- Yakima OnRamp Bike Rack for 2 Electric Bikes - 2" Hitches # Y36FR
The OnRamp is a really nice choice due to the fact it is so convenient to use with its ramp for easy loading and unloading of your bikes, as well as its padded clamps that move up and down the mast to accommodate any style of bike. The OnRamp also weighs less than 40 lbs so it is much lighter... view full answer...
The Timbren Rear Suspension Enhancement System # TFERSD is a confirmed fit for your 2014 Forest River Sunseeker 3170DS and does not require any additional spacers. It's perfectly setup for your motorhome as-is. view full answer...
Due to the way that the suction works on the SeaSucker Monkey Bars Roof Rack # 298-SX6000B this will not attach to your roof's non-smooth surface, as these crossbars require a flat, smooth surface to adhere to.
Since that isn't going to work, I recommend taking a look at the:
-SportRack Pop-Up Camper Roof Rack # SR1020.
This roof rack can be mounted on the roof of your 2021 Forest River Sunseeker as long as your trailer is no wider than 85-1/2" wide, and has a maximum weight capacity... view full answer...
The side marker cameras on the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR is definitively the best observation system on the market, and the best that we have as well.
Also, you are correct the yellow lensed cameras are the side marker cameras. Additionally, these will work just fine with your existing system, the color of the lenses don't have an impact on compatibility either.
As far as displaying one camera with three connected, you... view full answer...
Yes, the Vesper Steel Dual Trailer Wheel item # TA56FR will fit if the pilot hole is 4.77". You will just need to measure one of your current wheels to confirm. This is a 16" x 6" wheel with a 8 on 6-1/2 bolt pattern. view full answer...
Based on the brochure for your 2018 Forest River Sunseeker it appears your RV only comes with a connector on the side of the RV for a portable panel from Zamp. You can still check your roof to verify if you have a Entry Plate # 34273840 as I have seen occasions where parts installed on an RV do not always match the information in the brochure.
I recommend installing the Go Power Overlander Solar Charging System with Digital Solar Controller # GP39MR as a starting point for adding solar.... view full answer...
Thanks for reaching out!
The control knob for the Redarc Tow-Pro Liberty # RED24FR requires both a 1/8" and a 3/8" hole to be drilled one above the other as you can see in the attached photo. The centers of these holes should be 0.3" apart so overall you're looking at an area about 3/8" wide x 9/16" tall minimum.
It sounds like your 2020 Forest River Sunseeker Motorhome has the tow package wiring so you'll be able to install the Tow-Pro Liberty using the wiring harness adapters # 331-TPH-017... view full answer...
Go To Results