I spoke with my contact at Club and found that the Pedal to Wheel Vehicle Lock, # WICL303RED, measures 30 inches from inside hook to inside hook when fully extended. If the brake pedal in your rig is more than 30 inches away from the steering wheel, then this lock will not work.
Depending on the inner diameter of your steering wheel, you could look into a steering wheel lock like the Club Twin Hooks Chromoly Steel Steering Wheel Lock, # WI3000. This lock will work on your steering wheel... view full answer...
The 10 to 18 inch measurement is referring to the wheel/rim only - not the whole tire - for the Trimax wheel lock, which is the following part number:
- Trimax Heavy Duty Adjustable Wheel Lock with Padlock - 10" to 18" Wheels # TMX42ZR view full answer...
The Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) item # RG01-150 are the traditional 1/2-20 size and will definitely work on your trailer. You'll need one set per axle.
I have linked a review video below. view full answer...
I went out to the warehouse and pulled wheel lock set # RG01-150. The overall internal depth of the nuts that thread onto the wheel studs is 1-1/4 inches including the threaded part. The threads make up 3/4 of an inch of that 1-1/4 inch overall depth. view full answer...
The etrailer Trailer Wheel Lock, part # 288-02020 will fit your Sylvan Sport Go trailer's wheels. It fits a wide variety of wheel sizes, so it is very flexible.
I have included a product description link and a video review link below. view full answer...
There are common lug nut sizes found on trailers: 7/16, 1/2, 9/16, and 5/8 but the most common is 1/2 inch. If you can tell me the trailer weight capacity and wheel size/bolt pattern I can verify if they are likely to be 1/2 inch or another size.
If they are 1/2 inch we have wheel lock # RG01-150. Another option is a lock such as # WI490. With it the lug nut size won't matter. I have linked a video of this lock and included a link to the wheel locks we carry. view full answer...
I went out to the warehouse and pulled a Rackem wheel lock # RA-25 to measure it for you. The overall length is 20-3/8 inches. The overall width is 11-1/16 inches, and the height is just under 3-3/4 inches.
You can separate the 2 halves of this wheel lock. The overall length will still be 20-3/8 inches. The width of each half will be 8-1/2 inches. view full answer...
The Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) # RG01-150 are the traditional 1/2-20. The actual depth of the locking nut is 1-1/4 inches. view full answer...
The Ultra-Fab Chock and Lock Wheel Stabilizers for Tandem-Axle Trailers # UF21-001070 is a wheel chock system that performs the function of a traditional wheel chock, except that by its design it eliminates any movement and is lockable to deter theft. view full answer...
The Wheel Club Tire and Wheel Lock item # WI490 weighs 9 lbs. It fits tires up to 28" diameter, 9" wide. It fits rim sizes from 13" to 16". view full answer...
The Reese Pull Pin Lock Plates, part # RP58093 can be used on any 1/2 inch pull pin. It is installed in the cutout portion of the pin where the pin clip is normally installed. It is made to be locked with a padlock like the Master Lock Padlock, part # ML1KA.
The Hidden Hitch Fifth Wheel Hitch Replacement Pins and Clips, part # 6014, are the only pins I have and they are the only size pin that we use to attach our fifth wheel hitches to the base rails. They are 1/2 inch x 3-1/4 inches usable... view full answer...
I was able to go out to the warehouse and measure the inner diameter of the lock hole on the Ultra-Fab Wheel Chock # UF21-001080 for you.
I found that with a digital caliper the inner diameter was .36 which is about 23/64 of an inch and just under 3/8 of an inch.
I have linked the above mentioned part to this page for your convenience. view full answer...
The usable inside length (what we call the center span) on the Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches # TR63254 is 3-1/2-inches. This spec is listed on the product page but I took a walk to our warehouse to measure for myself so I could be absolutely sure for you. This center span is indeed 3-1/2-inches between the inside edge of the lock cylinder and the start of the bend in the pin. view full answer...
Gen-Y makes a lock specifically for their 5th wheel to gooseneck pin boxes like item # GY58GR with the auto latch. I highly recommend this lock because it is custom made for your pin box. It is the Gen-Y Auto Latch Gooseneck Coupler Lock item # 325-GH-7111. This heavy duty lock is made of steel and manufactured here in the USA.
I have linked a review video below so you can see all of the functions and how to get it set up. view full answer...
When the Stallion Trailer Wheel Lock # 288-02020 is completely closed the opening only measures about 1-3/4" so it will work perfect for your application. view full answer...
I went out to our warehouse for you and measured the etrailer Spare Tire Lock part # e98892, the outer diameter of the lock core is 1.13". view full answer...
Yes, the TorkLift Lock and Load Cargo Tray # TLA7752 will work for your application. The Tray itself weighs 67lbs, combined with your 150lb generator you are at 217lbs. As long as you don't exceed the lowest manufacturer capacity rating you will be okay.
I recommend getting a Anti-Rattle Trailer Hitch Receiver Lock # 63232 as well. This will limit the movement of the tray in the receiver on your 5th wheel, protecting your generator. It also has a lock built in so that your tray is secured... view full answer...
The lugs on the etrailer.com Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased # AKIHUB-655-35-EZ-K will indeed be 1/2"-20. This will be the standard used on 1/2" studs on trailer hubs.
If you were also looking to lock your wheels to the # AKIHUB-655-35-EZ-K, the Redline Wheel Lock Set for 1/2" Wheel Bolts # RG01-150 will fit right on and includes 1 key and 2 locks. view full answer...
The Demco Recon 5th Wheel Trailer Hitch # DM8550043 is made up of the Head Unit # DM6169 and Base Assembly # DM6180, with each piece weighing 50 lbs, making this most lightweight, easy-to-handle fifth wheel hitch available.
In terms of locking it the only security measure is a Base Rail Lock # C23256 which locks the hitch to your base rails. There is no way to padlock it to prevent someone from releasing the hitch, though you'd have to be extraordinarily unlucky for someone to just walk... view full answer...