The Inno Box 2020 Rooftop Cargo Box # IN86FR will fit as long as you have the required 24"-39" crossbar spread. You will need to measure to be sure. Also yes, this will fit on the Inno Aero Crossbars # INXB130-2. view full answer...
It sounds like you want to attach a Rhino-Rack Pioneer Roof Rack Platform # RR42115BF to your Rhino-Rack Roof Rack # RRVA118B-2, # RRRCL4 and # RRRCP48-BK on your 2018 Mazda CX-5. To attach a Thule Force XT XXL Rooftop Cargo Box # TH6359B to the platform you will need a set of Accessory Bars # RR43232B since the clamps on the base of the box need to clamp around a bar and will not attach to the platform channels. view full answer...
To mount a Yakima SkyBox NX 16 Roof Cargo Box item # Y95AV to the roof of your 2020 Subaru Outback Wagon you are going to need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR
Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 item # Y46VR view full answer...
Hey there Lisa, and yes, you're on the right track for getting a cargo box atop the roof of your 2017 Toyota Prius. The Inno rack you mentioned does indeed fit your Prius:
- Inno Square Crossbars # INB127
- Inno Feet for Square Crossbars # INSUT
- Custom Fit Kit # INK486
Since this rack uses square crossbars, the only other thing I really recommend is a wind fairing to dampen the wind noise and give you a peaceful journey. For that use the Inno Fairing # INA262.
With that, you're set... view full answer...
So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis.
For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories.
For a roof rack mounted ski carrier, I recommend the Yakima FatCat... view full answer...
We can definitely help set you up with a Yakima SkyBox 12 # Y07334 for the top of your 2023 Toyota 4Runner with the factory raised rails. All you will need to do is install a roof rack with crossbars. Since you are doing a Yakima brand roof box, it is best to go with a Yakima brand roof rack as well, since everything will be directly compatible. The Yakima JetStream crossbars will be a great fit for your vehicle. The complete roof rack consists of the following parts:
Yakima JetStream... view full answer...
Hi Samuel; I would be happy to help you find a hitch and roof rack for your new 2024 Impreza. Starting with the hitch I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76209. This is a Class III hitch with a bolt-on installation. Since it has a 2" receiver you will have more options for cargo baskets like # e98874 and other accessories. It also has a higher tongue weight capacity.
For a roof rack I recommend the Yakima JetStream Roof Rack # Y85SB. The JetStream bars are going... view full answer...
The Inno Rod Box Rooftop Fishing Rod Carrier # IN52FR can be easily installed and removed from your roof rack. I have linked our review video near the bottom of the page where you can see how easily the clamp system is to attach to your roof. This part is shown near the 16:40 mark of the video. view full answer...
Hey Paul, yes, the Thule Pulse large Rooftop Cargo Box # TH615 will indeed work with the Rhino-Rack Vortex Aero Crossbars on the 2021 Mazda CX-5 Touring. The Thule cargo box is designed to work with virtually any crossbar shape, and it is known to be compatible with the Rhino Rack Vortex Aero Bars. Your CX-5 has a naked roof correct? If so, the complete roof rack consists of the following:
- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2 # RRVA118B-2
- RCL Legs... view full answer...
Hey Bill, thanks for reaching out!
Your Yakima SkyBox 21 # Y07337 has the older mounting hardware that isn't able to be converted to the SmarT-Slot Mounting Kit # Y25AV.
This kit is only compatible with the Yakima SkyBox NX, GrandTour, and CBX Cargo Boxes. view full answer...
Yes, the Inno T-Slot hardware kit part # INBRP12 that you referenced does work with the Inno Roof Box 320 part # IN94FR. This will allow the cargo box to attach directly to the t-slots on the top of your crossbars. view full answer...
It sounds like you have a lot of cargo to transport in and on your Honda CR-V. Hitch carriers like the 22-1/2x49 Curt Cargo Carrier # C18113 are a great way to move heavy cargo items that might be too difficult to get up on your roof. Most vehicle roofs are limited to a weight rating of 165-lbs or less and this is only a fraction of the weight that can be carried on a hitch carrier.
But these hitch carriers are not intended to hold a large rooftop cargo box. The issue is that such a cargo... view full answer...
The Thule Sidekick Roof Mounted Cargo Carrier Box item # TH78GC will fit the factory crossbars on your 2008 Ford Escape with no issues. You will want to make sure they can be adjusted so the crossbar spread is between 23-5/8" - 28".
Additionally, for the rear hatch to open without interference you will need to have 51-7/8" of space between the front crossbar and the line where the rear hatch meets the rest of the body of your Escape. view full answer...
Hi Beth,
Yes, all manufacturers note that they do not recommend opening any moon/sun roofs while crossbars are installed. Speaking from experience you also will not want to open the roof with crossbars on because the sound will be loud and annoying. The Thule WingBar Roof Rack # TH73RE, # TH29SC, # TH93KE is only 4" tall so you'd likely have about 2.5"- 3" of clearance between the roof rack and roof so you'd need to measure how high the moon roof extends up in order to determine if it... view full answer...
Hey Craig, thanks for reaching out!
The Yakima SmarT-Slot Mounting Kit # Y25AV is only compatible with the newer Yakima roof cargo boxes so you unfortunately won't be able to utilize it with the older RocketBox design.
If you're needing to replace the mounting clamp for your older RocketBox then the SkyBox Replacement Mounting Clamp # Y62XR will actually work, according to Yakima.
Other than that we're looking at getting you a whole new box. If this is the case just let me know what... view full answer...
The Thule Force XT L Rooftop Cargo Box # TH6357B will be able to attach to your factory crossbars. It requires a crossbar spread of 23-5/8" - 36-1/8" which shouldn't be a problem. However, it wouldn't hurt to measure on your 2019 Traverse just to be sure. To find out if you will have rear hatch clearance there must be at least 47-1/2" between the front crossbar and the line where the roof and rear hatch meet. view full answer...
Hello Kit. Unfortunately, we do not carry a locking clamp that will work with the Karrite roof boxes. The Karrite boxes have been discontinued for quite some time now, and replacement parts are no longer in production. We do have one latch, part # 03347 which has been found to work on the Karrite Explorer model 7251. This is not a locking latch though. If your box will no longer lock, we would probably look at replacing it with something newer, like the SportRack Vista XL Cargo Box # SR7018. view full answer...
I have a solution for you.
First, though, we do not have access to a 2021 Toyota Sienna to test fit the Thule Evo Raised Rail Feet # TH710401.
Instead, I can recommend something we have been able to confirm with Yakima. That rack system consists of the JetStream Crossbars, part # Y00425, and the TimberLine Towers, part # Y33TR. These towers wrap around the raised rails just like the Rapid Crossroad Feet. I've linked to video reviews of the crossbars and towers for you to look at.
The... view full answer...