Installing the Curt T-Connector Vehicle Wiring Harness item # C55515 will not require you to flash the ecu on your 2007 Ford Ranger. This harness installs on the Ford Ranger's with the factory tow package.
If your truck didn't come with a 4-way or 7-way connector you will need the Hopkins Plug-In Simple Vehicle Wiring Harness item # HM40655. This harness does not require the ecu to be flashed either. view full answer...
I spoke to my contact at Erickson and they informed me that the E-Track like part # E19148 is zinc plated.
I attached a review video for the # E19148 for you to check out as well. view full answer...
The Roadmaster Direct-Connect Base Plate Kit # RM-524459-5 uses a 3/4" Pins # RM-910029 to secure to the crossbar.
We do carry the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297 that will fit with the Universal Tow Bar Adapter for Roadmaster Direct-Connect Baseplate # RM62ZR. view full answer...
Yes, it can. The RetraxONE XR Hard Tonneau Cover item # RTT-60335 is confirmed to fit the 2023 Ford Ranger's with a 5' bed. The crew cab option does not effect the tonneau cover.
The shipping package will be 88" x 20" x 16" and weigh 95 lbs. view full answer...
The Flint Hill Goods Aluminum Pickup Truck Ladder Rack part # FHG64ZR is universal in fit so it can fit many different truck beds. It can do this because the width between the uprights is adjustable. The 63" dimension is just the max they can be extended to so not to worry, it will work great on your 2022 Ford Ranger. It's one of the best cost effective options you'll find for the money that fits this truck. view full answer...
Yes you can absolutely use the ultimate trailer jack # 322-RDJ-2K to replace an older ram jack. The dimensions for the mounting plate are standard and should be the same.
The bolt holes are oval slots each having a 3 inch on center measurement. They range from 2-5/8 to 3-5/8 inches from the front of the coupler back and then the side to side holes range between 2-3/8 inches to 3-7/8 inches.
The overall plate dimensions are 4-7/8 inches on the back and 4-5/8 inches on the sides from the... view full answer...
I would be happy to! The correct base plate for your 2022 Ford Ranger that works with a Roadmaster All Terrain tow bar is the Roadmaster Direct-Connect Base Plate Kit item # RM-524459-5. The item # RM-524459-4 you were looking at also fits your Ranger but it requires a crossbar like item # 910021-00 to be used. The direct connect is better because it's less moving pieces and easier to hook up.
I have linked an installation video below to help you get it set up.
Here are some other parts... view full answer...
The correct CargoGlide that fits your 2008 Ford Ranger with a 6 foot bed is the part # CG1500-7038 which has an inside deck dimensions of 69 by 38 inches. The outer deck dimensions are 70 inch by 39-1/4 inch.
For your truck this is only size we have as a fit so we don't have smaller dimension options we can offer. view full answer...
The Custom Installation Kit # 22-1455 for the Westin Oval Tube Steps # W54HR has a measurement of 1-1/2" from the center of the front to center of the back holes on the bracket. The driver to passenger side holes are 1-1/16" on center and from the top edge of the curved bracket to the center of the closest holes is 2".
We do carry the Westin Oval Tube Steps # 22-5055 individually that you can use as well. view full answer...
It is absolutely possible and I'd be happy to help. In order to flat tow your 2010 Ford Ranger 4WD behind your 2013 Coachman Encounter you are going to need a high low adapter, tow bar and safety cables, base plate kit, wiring harness, and a supplemental braking system. The braking system is required by law in most states and Canada no matter how big your motorhome is.
To flat tow your 2010 Ford Ranger 4WD you will need the following parts:
Tow Bar and Safety Chains - Roadmaster Falcon... view full answer...
The BAKFlip MX4 tonneau cover part # BAK448332 that you referenced weighs 68 lbs when installed on your 2019 Ford Ranger 5 foot bed. view full answer...
I can definitely get you the parts you're looking for but to get 55" tracks we don't have a full-fledged kit like what you're looking at with the Roof Rack for Camper Shells # Y01-140B. Instead, here are the parts you'll need:
65" Heavy-Duty Crossbars - # RB1650B-2
Quick Mount Legs - # RRRLT600
55" RTC-Style Roof Rack Tracks - # RTC14
This gets you everything you're asking about but with the shorter tracks. view full answer...
According to my Erickson representative, their Big Bed Load Extender, part # EM07600 is 48-3/4 inches long, measured from the hitch pin hole to the rear surface of the upright, as shown in the provided photo.
If you click the provided link, you can see a product demonstration video featuring the load extender. view full answer...
The mirror surfaces that are on the Longview Custom Towing Mirrors # CTM2200A are totally flat. They are not convex at all so they should be exactly what you are looking for to fit your 1997 Ford Ranger. view full answer...
To flat tow a 2021 Ford Ranger behind a 2018 Holiday Rambler Vacationer XE 36H you will need the following parts:
Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-524459-5
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267
Charge Line - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25
Supplemental Braking... view full answer...
I confirmed with my contact at Thule that the 450 pounds of the Thule Xsporter Pro Truck Bed Ladder Rack - Aluminum # TH500XTB is the dynamic weight rating. While Thule does not have a specific static weight rating for the Xsporter, my contact reassured me that you will have more than enough weight capacity to mount a static accessory like a roof-mounted tent as long as the tent's weight rating is abided by. For example, since the Thule Tepui Foothill # TH37HJ is rated for 400 pounds, you... view full answer...
I went out to our warehouse to take a few measurements on both the clamp and mounting plate for the Inno Velo Gripper Bike Rack # INRT201.
The black plate measures 4 inches long and 2-3/8 inches wide with a small lip that measures 1 inch wide.
The bed rail clamp has inside dimensions of 2-13/16 inches tall and 1-5/8 inches wide. Its overall dimensions are 3-1/2 inches tall and 2 inches wide.
I have attached a couple images to assist. If you need some additional measurements please... view full answer...
I do have a ladder rack that will work for this application. My recommendation is the T-Rac Pro2 Truck Bed Ladder Rack for Compact Pickups - Fixed Mount - 1,000 lbs, part # TH37001XT. It has a dynamic weight limit of 1,000 lbs. You will have to check with Ford to see if your truck's rails can support this weight.
The weight limit of the Thule Xsporter Pro Mid Overland Truck Bed Rack - Aluminum - 600 lbs, part # TH34RR, is a dynamic weight limit. This means while your vehicle is in motion.... view full answer...
I contacted Pilot Automotive and found that the width range of the crossbar with the Bully Adjustable Ladder Rack for Full-Size and Compact Trucks # CG-902 is 42-1/2 to 65-1/2 inches. view full answer...
I walked out to our warehouse and measured the Redline Spare Tire Carrier # 413200. I took some pictures of part # 413200 and added some dimensions to the pictures for you.
Click on the pictures to see the dimensions of the Redline Spare Tire Carrier # 413200. view full answer...