The CIPA Custom Towing Mirror, # 11902 is for larger Fords than the Ranger, this is for models of the Ford Excursion and Ford F250 and F350 Super Duty trucks. Unless the mirrors of your Ford Ranger are the same as those of the larger Ford this will not fit properly.
Currently we do not have custom fit slide on mirrors for the 2021 Ford Ranger. I recommend the K-Source Universal Towing Mirrors - Clip On, # KS69ZR. See the attached product review and installation video of these mirrors... view full answer...
I believe I have a solution for you, but I checked with Roadmaster and they cannot confirm a base plate fit for your 1996 Ford Ranger Splash because they have only had a chance to fit the the Splash models from 93-94.
I checked with Blue Ox and they confirmed that their base plate kit part # BX2117 would work on your 96 Splash Ranger.
A popular tow bar with Ranger owners is the Blue Ox Alpha Tow Bar # BX7380. This is a non-binding tow bar that will be much easier to use than most. This... view full answer...
There is a Bestop Supertop Collapsible Bed Cover available for a 2006 Ford Ranger if it has the 6 foot non-stepside bed. The part # is B76302.
For installation details, click on the provided link. view full answer...
I recommend the Curt Channel Style Adjustable Ball Mount # C45900. This fits a 2-inch hitch, has both 2-inch and 2-5/16-inch balls and offers a height range of 6-inches of drop up to 5-inches of rise. It is rated for 14K. For a locking hitch pin you can use # C23519.
Please refer to the linked video for further illustration of this product. view full answer...
Roadmaster offers the XL Base Plate Kit, # 435-3, for your 1996 Ford Ranger.
In addition to the base plates, you will also need a tow bar, safety cables, a lighting solution and in most states, a supplemental braking system. I am including a few recommendations for you.
Roadmaster Tracker Tow Bar, # RM-020, has a 5,000 pound capacity and connects to any 2 inch ball.
Roadmaster Coiled Safety Cables, # RM-643, provide the extra security required in your tow system.
Optronics Magnetic... view full answer...
You can absolutely install the Redarc Tow-Pro Liberty # RED24FR in your 2019 Ford Ranger that has the Curt 7-way Connector Harness # C56431 installed, you will just need the universal wiring harness # RED69FR.
While Ford did not run a trailer brake controller port for installing a trailer brake controller like some other vehicles have, they did run the four wires you need. These will be located underneath the dash near the driver side wheel well and will be bundled together.
Inside the... view full answer...
The K-Source Universal Towing Mirrors, # KS69ZR are a confirmed fit for the 2019 Ford Ranger. If you need to remove easily to get into tight spots then this is a good choice. Another good option is the CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2, # 11953-2. view full answer...
I have a solution for you to add some suspension help on the rear end of your 2019 Ford Ranger, but Roadmaster does not make a rear anti-sway bar for that particular vehicle. Typically the Roadmaster suspension enhancement parts are only available for Class A or Class C RV or heavy vehicle chassis'. However, a really easy to install and helpful suspension enhancement for your Ranger that I recommend is the SumoSprings Solo Custom Helper Springs - Rear Axle # SS86MR.
These helper springs... view full answer...
For a base plate kit you will need the # 431-1 for your 1992 Ford Ranger. Since you have a Draw Tite tow bar the correct adapter will be the part # RM-025.
I attached a couple flat towing help articles for you to check out as well. view full answer...
I am not aware of any all-inclusive cross reference of cross-compatible OEM auto parts from different makers. The mirrors we offer are not OEM replacements, however we do have universal-fit towing mirrors intended for installation on factory mirrors to extend your viewing angle when towing. We also offer universal-fit door-mount and fender-mount types.
The link provided will show you all such universal-fit mirrors; you can use the filters in the left-hand margin to narrow the results based... view full answer...
The Greystone Standard RV Microwave, # 324-000106 is 19" wide x 12" tall x 14-1/4" deep without the trim kit; the trim kit dresses it out to 23-3/8" wide x 15" tall. The trim kit is not required, you can set this on a counter top.
We have the Furrion Over the Range RV Convection Microwave rated at 1,500 Watts, # FMCM15SS that has overall dimensions of 29-15/16W x 16-3/8T x 15D. view full answer...
The Curt Pintle Hook Mounting Plate # C48341 was only designed and engineered by Curt to be used in the drop position. I recommend using the Convert-A-Ball Cushioned, Adjustable Pintle Mounting Bar # AMPC3 if you need a mounting plate for use in the rise position. This mount has a cushion built into the hitch to help reduce shock transferred from the trailer to your tow vehicle. view full answer...
The Supertop for your 2006 Ranger is only offered in black. The zip-in vinyl windows are included, there used to be a mesh option that is no longer available at this point.
According to the instructions from Bestop, the following tools are required for installation:
Tape Measure
Phillips Screwdriver
7/16 Wrench
9/16 Wrench
Power Drill with 1/8 inch bit
Center Punch
Scissors
Utility Knife view full answer...
The brake controller you are looking for is the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. This is the same brake controller used in the OEM number you provided and will work on your 2021 Ford Ranger with factory tow package.
You won't find a tow port for a custom wiring harness to install the brake controller, but the 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink... view full answer...
We do have exactly what you need to join two female (vehicle-side) 4-pole flat trailer connectors. Roadmaster offers their # RM-300150-00 extension wiring loop which has male (trailer side) connectors on both ends of a 6-foot harness. This will allow you to join the two female 4-pole connectors on the truck and trailer. view full answer...
If your 2002 Ford Ranger has a factory-installed step bumper we do offer one hitch that will fit, part # 75082 from Draw-Tite. Do please note that this hitch has a maximum gross trailer weight rating of 4000-lbs unless used with a weight distribution system, in which case its capacity increases to 6000-lbs. This hitch does not come with a ball mount, pin and clip so you might consider the etrailer Ball Mount Kit # 989900 as an all-inclusive option.
Weight distribution systems must be selected... view full answer...
That's a good question. We do have the Blue Ox Patriot part # BLU37TR. The # BLU37TR is there newest supplemental braking system offering from Blue Ox. view full answer...
Yes, there is a plug in style wiring option for your 2022 Ford Ranger without tow package to provide a 7-way trailer connector.
- T-One Vehicle Wiring Harness # 22124
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located beneath the vehicle, on the driver's side. It does not require cutting or splicing.
If you need a 4-way as well, you can pick up the Pollak 7 Pole to 4 Way Connector Adapter # PK12716 which adapts the 7-way into a 4-way. view full answer...
Yes, we do have a Rhino-Rack side loader. For that accessory, you need the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading # RR-RUSL.
In order to use the Universal Load Assist, you will need a crossbar system and a kayak carrier on your 2021 Ford Ranger (bare roof). For a great compatible crossbar system, I recommend the following parts:
- Thule SquareBar Evo Crossbars - Steel - 53" # TH712400
- Evo Clamp Feet for Thule Crossbars - Naked Roofs # TH710501
- Fit Kit for... view full answer...
You may be able to use the Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211 for your 1993 Ford Ranger. This is a universal fit which will involve drilling holes into your Ranger. There currently are no custom fit tailgate assist devices for your Ranger. view full answer...
Go To Results