There is not mounting hardware or tape included with the Camco RV Baggage Door Catches, parts # CAM44173 in polar white and # CAM44163 in colonial white.
You'll need to pickup either locally. view full answer...
The RV water heater door part # AT91386 does not come with mounting hardware so for that you'd need the cam locks like part # CAM09213 and you'd be set. view full answer...
The Global Link RV Entry Door Locking Latch Kit part # 295-000019 does come with installation hardware which consists of four screws. There will be two screws that hold the face of the latch to the rear and then two screws which secure the catch plate inside the door. view full answer...
The Replacement Black Door for 6-Gallon Atwood Water Heater part # AT91507 does not come with any pins/hardware to attach it to the water heater. It is designed to reuse the pins/hardware that hold the existing door on. If you need these then your only option would be to either take a trip to the hardware store or your local salvage yard as we do not offer these separately outside of a new unit. view full answer...
Yes, the Fogatti RV Tankless Water Heater # LSB64FR that you referenced does come with a door as well as the walll control center It comes with everything needed to install and function in your RV. view full answer...
Since the door in question does not already have a window in it then Valterra Frame Assembly and Glass for RV Entrance Door - 12" x 21" Item # A77051 provides the frame and glass as well as 8 screws for installation. Any sealant such as # 0160297 you would want to use is not included.
The frame is two halves and the glass so it can come apart so you can switch out the glass. Or you can use # A77008 which is just the frame and no glass or hardware. view full answer...
It depends on the part. For example, the Valterra frame and glass you were looking at, part # A77051, does not include the seal. It's just the frame, glass, and mounting hardware.
On the other hand, part # LC363370 from Lippert is the frame, glass, and seal but no hardware is included.
Both parts I referenced are 12 by 21 inch glass. view full answer...
Yes, the Camco RV Adjustable Screen Door Cross Bar # CAM42183 referenced in your question includes the screws necessary for installation.
This push bar will install right on your RV screen door to add a sturdy feel and help prevent damage from people pushing through the screen. I have attached a short video demonstration on this product that you can also check out. view full answer...
If you're ordering an access door like the Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - Chrome # UF48-979010 or the Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - White # UF48-979009 then you'll have to order the Camco Cam Lock - Straight or Offset - Thumb Operated - 7/8" Thick
Item # CAM44323 separately to replace the keyed locks that come with the door. view full answer...
Most factory baggage doors have Lippert handles and they are generic keyed. If you want unique keys to better secure your cargo I recommend swapping them with the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-3/4" Thick # 295-000078. This will give you matching keys for your doors and a unique key for your RV to keep others out. view full answer...
The Stromberg Carlson Lend-a-Hand Extra Large Folding Grab Handle # AM-533 does include four mounting screws for installation on an RV door stud. The handle can mount on either side of a door but it folds in only one direction (toward the rear of the RV when mounted on the passenger side). view full answer...
The Replacement Step, Motor, and Control for Kwikee RV Electric Steps part # LC3747452 comes with the Replacement Control Unit for Kwikee Electric RV Steps part # LC379146. Therefore, you'd need to use the included control unit and not an existing. There is also the option of the Kwikee Electric RV Step Complete Assembly part # LC3747453 which is a complete unit that comes with step, motor, control unit, door magnet, and switch. view full answer...
Keyed alike means that if you ordered more than one of Global Link RV Entry Door Locking Latch Kit # 295-000002 and chose the keyed alike option then all of the locks would use the same key. view full answer...
Yes, with the Atwood Gas and Electric RV Water Heater # AT94023 the controller switch assembly and the front door panel, both shown in the product photos, are included. I linked an image that shows you the complete contents of this item. view full answer...
Part # A77012 from Valterra is just the interior portion of a window frame assembly that mates with the matching exterior part # A77008. These parts work with a glass pane of 12 x 21-inches, which you will supply separately along with the required mounting screws. view full answer...
Yes, the Global Link RV Baggage Door Slam Latch # 295-000078 are available to be keyed to number 346 through 350. So if some of your existing latches use keys # 295-000075 (Global Link Key #349), you can order the latches to match those. view full answer...
The key code for the Full Size Locking Steel Flush Door Latch # L3980 is random and they don't all have the same code plus there is no option to order them keyed alike. We do have the Global Link RV Entry Door Locking Latch Kit # 295-000002 which comes in polished chrome and the option to order it keyed alike. It isn't the exact same style of door latch but if you are able to modify your application this will work just as great! view full answer...
The Bauer Products European Style RV Entry Door Lock # BA38AR comes with different key numbers so you'll have to look at your current key to get ones that match what you have. view full answer...
I recommend using the MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways - 2 Steps # MR86RR, which I was able to confirm with my contact at MORryde will work on your door with 22-1/2" between the flanges. The bracket should have enough play to close the 1/4" gap according to them, but he mentioned if you've still got a little slack you can use something as a shim/spacer to reduce movement. This is a 2 step option that is ideal for entry heights between 25"-29". view full answer...