I wish there was a way to upgrade your cover to have the slots needed for the Overhaul HD but the line of cover you have does not have this available.
It's probably not the solution you want but you'd need the ONE XR part # RTT-60371 which comes with the T-Slots needed for the Overhaul HD # Y01151-5855. view full answer...
The correct floor mats for a Phoenix Cruiser on Ford E-Series Cutaway Chassis is the WeatherTech All-Weather Front Floor Mats part # WTW51 for black, part # WTW51TN for tan, or part # WTW51GR for gray. view full answer...
I would be happy to recommended a weight distribution system for your Shoreland'r SRV55TBB Boat Trailer being towed with your 2011 Ford F-150 Raptor but first you will need the total tongue weight of your setup.
Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo added behind the rear axle of your truck. Using a tongue weight scale like the # e99044 is an easy way to get an accurate tongue weight measurement, but there are... view full answer...
Your 2014 Ford F-150 Raptor has keyless entry. Therefore if you are installing the Pop & Lock Custom Tailgate Lock - Power - Black, part # PAL8250, you will need to access the passenger side kick panel. The wires you would splice into are behind the kick panel. There you will find the wire harness with the pink w/red wire and pink w/black wire.
I have included the installation instructions for a more detailed explanation and an installation video link below. view full answer...
Yes we have the Timbren kit part # TABSFR150RB which is a confirmed fit for the rear suspension of your 2022 Ford F-150 Raptor. This can provide up to an additional 2,000 lbs of suspension support as well. view full answer...
The Yakima OverHaul HD # Y01151-58 can install with a tonneau cover if you use the adapter # Y01155 but you'll have to use a tonneau cover on your 2020 Ford F-150 Raptor that has tracks for this like the RetraxPro XR part # RTT-80373. view full answer...
The Draw-Tite Ultra Frame Trailer Hitch Receiver # DT35MR will not fit your 2018 Ford F-150 Raptor. However, if you still need a heavier duty hitch, and have a factory hitch currently, the Curt Trailer Hitch Receiver # C26HR is confirmed to fit your Raptor and will work great. This hitch has a maximum towing capacity of 10,000lbs and a maximum tongue weight of 1,000lbs.
If you do not have a factory hitch installed, then I recommend another alternative like the Curt Trailer Hitch Receiver... view full answer...
The best suspension enhancement solution out there for what you are looking for on your 2019 Ford F-150 Raptor is the RoadActive Suspension kit # RAS3611 as it gives the support you are wanting to reduce the sag when carrying cargo weight or towing but actually improves the ride quality and handling of the vehicle whereas basically every other option out there is going to sacrifice ride quality. view full answer...
The SumoSpring part # SS552GR that fits your 2019 Ford F-150 Raptor attaches to a bracket that attaches to your truck frame so it does not miss contact with the frame at all. The load would be evenly distributed on it. view full answer...
The Camco Olympian Grill Storage Bag Item # CAM57632 has a main compartment that is 22" long x 14" wide x 9" tall. Your grill would have to be up to that size but no larger to fit properly in this bag. view full answer...
It sounds like you are wanting to install a ladder rack onto your 2019 Ford Raptor that has a tri-fold tonneau cover installed on it already. This may be possible, but your tonneau cover must mount inside the bed rails, not on top of the bed rails. If the tonneau cover mounts on top of the bed rails then it will interfere with the way a ladder rack installs onto the bed rails.
The Rapid Switch Systems Pro Sport Truck Bed Ladder Rack # RS67FR that you were looking at will not work since... view full answer...
Your 2008 Fleetwood Evolution E3 has an unloaded hitch weight of 395 lbs; when you add the loaded cargo a weight distribution system would definitely help especially with sway control and additional weight of whatever you will load on the cargo deck.
Assuming you have that cargo deck for a reason and will be transporting something of decent weight I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW # EQ37100ET which is rated for... view full answer...
CIPA has universal tow mirrors we have had the chance to install on a similar 2019 Ford F-150 Raptor like with the part # 7070-2 and we found they fit and worked great but there are not custom fit options like the two you mentioned. They do not fit the Raptor model trucks. Check out the install video I attached for these mirrors on a similar Raptor as yours. view full answer...
I really like the SumoSprings Solo Custom Helper Springs - Rear Axle part # SS52GR for this situation. They engage much more smoothly than the Timbrens part # TFR150RB do. The overall user experience is going to be better for you since you won't feel them engage which is common on the Timbrens. The 1500 lb. capacity is at 50% compression so at about mid stroke the more they get compressed the more weight they take up.
Please keep in mind this doesn't raise your vehicles towing capabilities... view full answer...
The Roadmaster Direct-Connect Base Plate Kit part # RM-524431-5 is a great option for a 2015 Ford F-150 and a confirmed fit. It will mount using the factory tow hook holes so there's only minimal drilling required.
In regards to compatibility with a grille guard or bull bar, this would vary by guard/bar but judging where most mount it would not be compatible with most setups. I can't recommend changing or modifying any of the hardware. view full answer...
The weight listed on a trailer dolly like the Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 lbs # DM9713045 refers to the maximum vehicle curb weight that can be used on the dolly, so you would be able to use a vehicle with a curb weight under 4800-lbs. This is our largest dolly available and it looks like the 2020 Ford F-150 Raptor has a curb weight of between 5,508-lbs and 5,684-lbs, so this dolly would not be sufficient, but I do have a solution for you.
If you're... view full answer...
The crossbars of the # RR29XR are 3-1/8 inch wide so basically any u-bolt wider than that would fit and work great. If you can let me know the basket you have I can see if we have replacement hardware for it. view full answer...
The best suspension enhancement we offer for your 2020 Ford F-150 Raptor is the RoadActive System part # RAS3611 as it gives you adjustable support like you are wanting to reduce the sag but it also doesn't make the loaded or unloaded ride quality harsh like other options. And also isn't as high maintenance as the air bag kits. view full answer...