I have a hardware solution for you. While the CargoSmart X-Track Cargo Organizer # 3481788-C does not come with screws, we do carry ones that will work great with the organizer. For wood screws, I recommend the Snap-Loc E-Track Wood Screws # SL49FR. If you are using the organizer on a metal application, I recommend the Snap-Loc E-Track Self-Drilling Metal Screws # SL99FR. Both of these parts come in sets of 20 screws. view full answer...
The magnets that come with the Hopkins Go Gear Console Plus Interior Cargo Organizer # CNSLPLUS-BLA are found in the stitched "pockets" that I've highlighted in the attached photo.
If your Go Gear didn't come with magnets then it sounds like you'll want to take advantage of the 1-year warranty. If you purchased it through us you can reach out via the order emails you received or you can let me know what your order number is and I can start the process for you.
Attached is a review video... view full answer...
Yes, the quantity you enter for the Deka Wire - Jacketed 7-Wire # DW04914-1 is equally to the amount of feet you will receive. So if you need 20 feet of this wiring then you'll enter "20" into the quantity section.
If you're looking for a 7-Way connection as well then I really like the Wiring Upgrade Kit # HS381-9000 for the trailer side because of the organization with the junction box, and then the Hopkins Wiring Kit # HM40975-11998 for the vehicle side because it gives you an OEM-looking... view full answer...
In regards to the Strap Hinge for Enclosed Cargo Trailer Doors part # 2212, hardware is not include nor do we offer this separately. Therefore, you'll simply need to take a trip down to your local hardware store and choose the nuts/bots that best work for your application. view full answer...
For a Furrion AC kit that comes with everything needed to add AC to your cargo trailer/camper you'd want the part # FR55PV which comes with all of the wiring needed, the single zone controller, the thermostat, and the distribution vent that would mount on underside of your roof hole. view full answer...
The 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR is just the cargo carrier with brackets to allow it to mount to a 4" x 4" and 4-1/2" wide x 4" high RV bumper. You would need to slide the cargo carrier to one side of the bumper and use a mount like the Ultra-Fab Folding Spare Tire Carrier for Trailers and RVs # UF15-954730 in the available space. view full answer...
The Curt 24x60 Cargo Carrier for 2 Inch Hitches C18153 (DISCONTINUED) that you referenced does not come with a hitch pin to secure the carrier to your Suburban's hitch. We offer a number of hitch pin and clips and hitch receiver locks that will work well for you to secure the cargo carrier.
I recommend the Let's Go Aero Anti-Rattle Trailer Hitch Receiver Lock for 2 Inch Hitches # 63232. This hitch lock will work with the hollow shank in the Curt # C18153 carrier to function as an anti-rattle... view full answer...
The screws for mounting the license plate that come with the Enclosed Cargo Trailer License Plate Holder # LP35BB are 1/4" screws with a coarse (20 threads per inch) thread style.
Attached is a review video for you to check out. view full answer...
Here are parts lists for both of the kits that come in the 24x64 etrailer Cargo Carrier for RV Bumper # e83YR (see attached photos).
The Mount-n-Lock SafetyStruts # MO22FR do come with our cargo carrier. view full answer...
You are correct that the Draw-Tite Sportframe Trailer Hitch Receiver # 24913 includes a ball mount, hitch pin and clip. The Curt hitch # C11265 includes the pin and clip, but not the ball mount.
Please note that the availability of hitches for any given vehicle does not necessarily mean that vehicle can tow a trailer. I was not able to verify any tow rating for your Corolla. Your owners manual or local Toyota dealership should be able to offer clarification of the vehicles capacities.
All... view full answer...
A drawbar, also known as a ball mount or stinger, is the part that fits into the hitch and provides a platform for a ball that the trailer will couple to. If you are looking at the Curt trailer hitch for a 2015 Honda Civic then you can use # C11391. The drawbar isn't included but you can add one using part # C45521. If you will be towing with the hitch then the ball size used needs to match what the trailer coupler requires. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258.
You... view full answer...
Yes, the receiver portion that holds the Thule Arcos Enclosed Cargo Carrier # TH25YE is included. This cargo carrier is designed to work with 1 1/4" and 2" hitches, and has a maximum weight capacity of 110 lbs.
If you don't have a hitch yet, you are going to need one. Currently the only hitch we offer for the '23 Tesla Model Y is the Draw-Tite Max-Frame Trailer Hitch Receiver # DT58MR. Even though this is the only option, it's still a great option that has plenty of capacity and will also... view full answer...
No, the etrailer cargo carrier # e99847 does not include any anti-rattle equipment. For this carrier or any carrier that fits a 2 inch hitch and has a hollow shank I recommend anti-rattle device and lock # e99047. I have included a link to a video review for you. view full answer...
The wiring for a 2015 Buick Encore is # C56216 and won't be an included item with the Curt Class-I trailer hitch # C11527. The reason wiring harnesses do not come with the hitch is because some vehicles already have a trailer wiring harness so we make them available separately.
The hitch # C11527 comes with a complete hardware kit and instructions.
If you happen to need a ball mount and hitch ball, I recommend ball mount # C45520 and 2 inch hitch ball # C40018 or a 1-7/8 inch ball # C40001.... view full answer...
For products like the Rackem Trimmer Rack for Enclosed Cargo Trailers # RA-5 and the Pack'Em Trimmer Rack for Enclosed Trailers # PK-6-5 when the page states quantity 1, that does mean one set of rails to make the one rack. view full answer...
All of the hardware need to put together the 20x60 Folding Cargo Carrier, # A30850, is included with it. You would just need a hitch pin for a 2 inch receiver or a lock like # 7683 to secure the carrier in the hitch. I have included a link to a video review of this carrier for you.
In order to determine fit of this or any accessory, you will need to measure from the center of the hitch pin hole on the vehicle out to the distance required to clear the rear bumper. If that distance is less... view full answer...
The Cargo Towing Solutions Break-Away Kit and Battery for Hydrastar XL, # HBA-EBA, does not include a battery charger.
If battery is connected to the 12-volt auxiliary circuit in the 7-way, the battery might overcharge causing damage to the battery. There is no way to regulate the power on the 12-volt auxiliary circuit to the breakaway battery.
It is recommend instead to use a charger like the Trailer Breakaway Kit Battery Charger, # 20011. The kit is easy to install, black wire connects... view full answer...
Yes, the Stealth Hitches Hidden Trailer Hitch Receiver part # SH44FRT which is a fit for a 2017 Jaguar F-Pace comes with both a 2" receiver tube for use with bike racks and cargo carrier but also a ball mount and wiring harness for towing a trailer. view full answer...
Yes, the Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier # 310-VTG002 does come with the adapter shank for mounting it to a 2" trailer hitch receiver. I have highlighted the specific part in the attached picture and you can see it installed in the linked review video. view full answer...
A 5/8 inch hitch pin and clip is included with the dual-purpose ballmount, part # D210. To deter theft I recommend a hitch lock like # e98880. view full answer...