Since there isn't a smaller bracket setup for the CE Smith Heavy Duty, Vertical Bunk Brackets # CE10160GA-2 best option might be to use spacers to take up the extra space and provide the tighter fit. view full answer...
Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part # 0160297 will do an excellent job of sealing your new aluminum panel to the trailer and covering any holes you should need to fill. The sealant is white in color and comes in a 10.1-fl-oz cartridge. It can adhere to aluminum, galvanized metal, plastic, vinyl, fiberglass, wood, and even mortar/concrete. In order to apply the sealant... view full answer...
The Timbren Axle-Less Trailer Suspension System part # ASR3500S06 will allow you to use parts from an existing 3,500 lb axle such as brakes, hubs, wheels etc. The spindle and brake mounting flange are no different than a traditional axle. In regards to a bearing kit, you can use the Bearing Kit for #84 Spindle part # BK2-100. The Electric Trailer Brake Kit part # AKEBRK-35-SA can then be used to replace the brakes. view full answer...
The Atwood 31013 is no longer made. The best choice for replacement is the RVCO # RS34FR which mounts flush against the wall, and the overall measurements are 4-1/4" square, and it sticks out 1/2" from the wall.
Works with 2-wire installations. view full answer...
Your 2014 Coleman Expedition CTS191QB has 3,500 lb axles so for a replacement brake assembly set you'd want the part # AKEBRK-35-SA. Since you have a tandem axle trailer you would need two sets of these. view full answer...
For campers like your 2010 Coleman E3 the best hitch options we have are the universal mounts like the Curt # 13703 that you referenced. This fits frames between 22 and 72 inches in width and also fits all styles and can be used with an RV approved bike rack like the Swagman Dispatch # S44FR.
Another great option is to go with the Jack It bike rack part # LC429756 which attaches to the same mount as your jack and allows you to not need a hitch. view full answer...
To keep leaves, twigs and other debris off the top of your slide where they can cause damage to the seals, a slide topper is definitely the way to go. For your 161 inch long slide out, Lippert recommends going with their # LCV000168110 Solera Slide Topper, which measures 163 inches, and is recommended for slides measuring between 158-163 inches in length.
The # LCV000165061 you'd looked at is recommended for slides from 146-151 inches in length, and wouldn't provide adequate coverage.
If... view full answer...
For your 3,500 lb Dexter axle, I recommend the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts # APUBR-1 or the CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc # CE23002. view full answer...
Go To Results