The Brophy Swiveling D-Ring Tie Down Anchor part # RR06 does not come with a backer plate and it's not typically used with one. The backer plate is not required but if you wish to use one you'll need to construct this on your own. view full answer...
The load straps and anchor points included with the Thule Pulse cargo box # TH614 can be used to secure items being carried in the box. There is also a strap that hangs down when the box is open so you can pull it to close the lid. The load straps and anchor points do not have to be used. The strap to pull the lid down though is very handy. view full answer...
The Erickson Round D-Ring Tie-Down Anchor # EM59110 doesn't come with the hardware so you'll need to source those locally and be sure the hardware fits the 1/4" mounting hole diameter.
The hardware isn't provided because this can be installed in a variety of floor types so it's best to get hardware designed to secure to your trailer floor style. view full answer...
The Erickson Flip-Up Stake Pocket Anchors # EM01006 are sold in pairs. If you needed a total quantity of 4 you'd need two sets total. view full answer...
The Rhino-Rack J-Style Kayak Carrier - Fixed - Universal Mount, # S510, is sold as a pair of two. This carrier will carry 1 kayak with rubber padding on the cradle arms cushioning the transport. It includes two specially designed tie-down straps to secure the kayak to your roof rack crossbars that have a padded buckle. It also includes two tie-down straps to anchor the bow and stern to your vehicle. You may also want the Rhino-Rack Anchor Strap- Qty 1, # RRRBAS. I've attached a video... view full answer...
The Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie-Down Systems part # BWMC2305 does not come with the mounting hardware needed for installation. As you mentioned you can pick them up at your local hardware store. I recommend using grade 5 or greater. view full answer...
I have the right part for you. Unfortunately, the B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates # BWMC2300 only comes with the base assembly without the clamping bar.
However, if you are looking for the complete system with a base plate and clamping bar, it depends on what type of Harley you have. Here are the different options:
- B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Softail, Dyna, V-Rod # BWMC2302
- B&W Biker Bar Motorcycle Tie-Down... view full answer...
I checked our inventory and found that the feet for the Rhino-Rack Batwing Compact Awning # RR33300 are still the stationary style with two slots for tie-down anchors to slide through and secure the feet to the ground. As inventory is ran through we'll eventually get to the newer style feet, but Rhino-Rack most likely also has an inventory of older models to run through as well. view full answer...
The Erickson Car Tie-Down Kit - Twisted Flat Hooks and Axle Strap w/ Ratchet # 08504-05 comes with one tie-down strap and one axle strap. view full answer...
The Curt J-Style Kayak Carrier # C18320 comes with tie downs to secure the kayak to the carrier, but it doesn't come with bow and stern tie-downs. We recommend using bow and stern tie-downs because it just further secures your kayak and helps to keep it from sliding back and forth if you have any extreme conditions while driving.
I recommend either picking up the Yakima Bow/Stern Tie-Down Ropes w/ Ratchets and Strap Loops # Y04031 or just going with our J-Style Kayak Carrier # e98878 which... view full answer...
The Camco Tarp Tie-Down Clip come in a pack of 4. The Erickson Bungey Ball Bungee Cord Tie-Downs - 12" Long # EM06650 come in a quantity of 10. view full answer...
When you order the # TLF2007 you will receive two of the tie downs. Basically it's all you need for the front, so it's both sides.
You would need to order a set for the rear of your truck based on the truck you are driving. view full answer...
Yes, the TruXedo Elevate Truck Bed Rack System # TX46NV does include the 4 tie downs. This is demonstrated in the parts list for the TS Rails. view full answer...
The part # LC182906-182971 from Happijac is a set of front and rear tie downs so with this part number you'd have tie downs covered for all 4 corners of the truck. view full answer...
For your 2024 Chevrolet Silverado 3500, you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3221.
There are currently no front tie downs available for your vehicle, however they are expected to be available at some point, just have not been confirmed yet. You are also going to need a set of turnbuckles # TLS9529 to secure your camper to the tie downs. view full answer...
The Fulton F2 Retractable, Ratchet Transom Tie-Downs # F72FV that you referenced does not have replaceable straps. Only solution would be new tie downs. view full answer...
Yes, the SportRack Kayak Carrier with Tie-Downs # SR5513 is sold as a pair (qty. of 1 is a pair). So you will get the front and rear carrier. This also includes 2 tie-down straps and 1 set of bow/stern tie-down ropes. view full answer...
The HappiJac Truck-Mounted Camper Tie-Downs # LC182908-182928 does come with the stabilizer bar. I've included a video showing the contents of this product so check that out! view full answer...
Good question but the frame-only portion is not available as a separate purchase; you do have to get the entire part, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4007. view full answer...
Both the # TLF3007 and the # TLF2020 include the tie-down inserts, the frame brackets and all necessary installation hardware, both are complete kits that include everything needed to install the tie-downs.
Turnbuckles like the # TLS9522-2-LK locking TorkLift FastGun are sold separately.
I've linked to some product demonstration videos for both kits and the turnbuckles. view full answer...