I spoke with my contact at CIPA and the mirror # CM27095 measures 8-1/2 inches from the case to the end of the mirror housings. This mirror is a replacement for the factory mirrors on the 1990 Chevy Corsica. view full answer...
The K-Source Replacement Side Mirror # KS62160G that fits your 2007 Chevy Avalanche only has one plug, which supports the power adjustment, heated glass, power folding and memory, as well as LED turn signal and puddle lamp if you have those on your mirror.
This mirror does not support the auto-dimming function, which may be what the additional plug-in is for on your '07 Avalanche. This is a direct replacement for the driver's side mirror on your '07 Avalanche. view full answer...
I reached out to my contact at CIPA who said that the mirror that comes with the Replacement Side Mirror # CM46220 for your 1997 Dodge Dakota is 5"x7". view full answer...
The length of the arms on the K-Source Custom Towing Mirrors - Manual - Textured Black - Pair # KS62169-70G is 16" just like your existing mirrors. These are a direct replacement for the 25894030 and 25894029 OEM side mirrors.
I have attached a review video along with a diagram showing the measurement for your reference. view full answer...
Based on what you were looking at I have listed two options below for towing mirrors for your 2023 Ram 1500 Classic:
Custom Fit Slide On Mirrors - Longview Custom Towing Mirrors item # LVT-3100C. These mirrors slide on and clamp securely to your Ram's existing mirrors. They provide an extra mirror that measures 4-5/8" wide x 5-3/4" tall that can be adjusted left and right along with up and down so you can see the side of your trailer or past it.
Full Replacement Towing Mirrors - K-Source... view full answer...
We do offer slip-on towing mirror extensions that will work on your 1996 Chevrolet K3500 Pickup. These are shown on the linked page. CIPA offers their slide-on towing mirror set # CM10200 which is custom-fit for the mirrors on your truck. These fit on both the manual and powered OEM mirrors.
The link also displays complete replacement towing mirrors that bolt on in place of the OEM units.
I contacted CIPA for the dimensions you asked about. Mirror # CM55100 has a glass surface that measures... view full answer...
The width of the CIPA replacement strap # 11952STRAP is 13/16 inches.
The correct replacement ratcheting strap for the K-Source mirrors # KS3891 that you have is the # KS3891STR.
I have linked all of the above mentioned products to this page for your viewing and purchasing convenience. view full answer...
The bolt holes on the top bracket of the CIPA Universal Door-Mount Replacement Mirrors # CM45000-2 are 3-13/16" apart center to center. I have attached a few diagrams showing the measurements for your reference. view full answer...
I confirmed with my contact at K Source that the distance between the two top tabs of the K-Source Panoramic Rearview Mirror # KSRM010 is 4 inches. I went ahead and attached a diagram of the mirror to this answer to give you perspective. view full answer...
Yes, they will. The K-Source Custom Extendable Towing Mirrors item # KS70103-04T will fit your 2020 Toyota Tundra. These mirrors are custom fit and designed to replace your factory mirrors.
I have linked an installation video below.
One thing to note is that we have spoken to K-Source and you cannot upgrade to a power mirror with heated face and turn signal if your OEM mirror is not already equipped with those functions. It will fit but you won't gain the two functions. view full answer...
The set screw for the CIPA Comp II Rearview Boat Mirror Item # CM11080 is a 1/4 inch fine thread and the length is 2-1/2 inches long. view full answer...
I spoke with my contact at Bestop and she informed me that the mounting plate for this Bestop Replacement Mirror # B5126200 has dimensions of 5-1/2 inches by 3 inches and the mounting holes are 1-1/2 inches apart.
Check out the picture I put together that shows all of these measurements. view full answer...
Great question! I went ahead and reached out to my tech at K Source, and he confirmed that he does not have the exact bolt specs for the K-Source Replacement Side Mirror - Passenger's Side # KS65027Y. Although, if you are curious about fitment, this mirror is confirmed to fit a 2014 Hyundai Santa Fe (Sport model only). It is a direct OEM replacement. Also, my tech also did confirm that the mounting hardware kit comes with nuts to attach to the bolts. view full answer...
I went out to the warehouse to take some measurements of the fasteners in Replacement Hardware For CIPA Mirror Item # CM11002. The threaded part is 1-3/16 inches long. The overall length is 2-13/16 inches. I made a picture showing this for you. view full answer...
The top mounting hole measured center to center to the bottom mounting hole is 18". The overall length of the arm is 19 1/4".
The mirrors are going to be a bolt on installation, it may require drilling if existing holes are not present. All of the mounting holes on the CIPA universal door mount mirrors part # CM45000-2 are going to be 3/8" and the hardware is included. I like that the mirrors are made of stainless steel, so they will hold up better to rust and corrosion.
I have attached... view full answer...
The wiring for the K-Source Replacement Side Mirror # KS68CJ measures 10-1/4" from the mounting point on the mirror to the back end of the connector when the wire is stretched out (see attached). I'm not sure if this is long enough for your 2020 Honda CR-V but I can say that we had initial reports about the wiring being short and K-Source told us they were looking into it and fixing it back at the end of 2021 so hopefully this will be long enough for your application!
We do have a review... view full answer...
I went out into our warehouse and pulled a CIPA Round, Convex HotSpot Mirror # CM48502 to measure and found that the post that at one end attaches to the back of the mirror and on the other end attaches to the bracket measures 1 inch and the thread of the bolt used to attach the bracket is 5/16 coarse thread. view full answer...
The distance between the lower arms on the K Source Universal Low-Mount Style Door Mirror # KS29MD runs 8-10" for installation. K Source was unable to give me the length and width of the mounting plate but the distance between the mounting holes is 3-7/8" so the overall length of that plate is approximately 8".
I have attached the instructions in a picture below which include these measurements for your reference. view full answer...