The only hitch that we have, as of June 2023, that fits your 2019 Cadillac XT4 is the Curt part # C39FR. The etrailer hitch that you asked about, # e62AR, actually fits the XT5 models so it would not work for you.
If you were looking for trailer wiring too the Tekonsha kit part # 118795 is what I recommend as it installs very easily without requiring any splicing. view full answer...
For your 2019 Cadillac XT4 the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C39FR is the correct fit. The installation details state the following for removing the fascia:
a. Open the lift gate.
b. Remove the plastic cover next to the tail light (each side) by pulling upward to release the clips.
c. Using a T20 torx remove the screws connecting the fascia to the vehicle (each side).
d. Remove the wheel well trim using plastic fascia removal tools. Carefully pull the trim... view full answer...
There is no type of fascia cutting or trimming necessary whatsoever to install the Curt Trailer Hitch Receiver # C39FR on your 2020 Cadillac XT4. The fascia has a removable panel which will allow you to access the trailer hitch when you need to and put the panel back on when you aren't using the hitch. The fact you can remove that panel and easily access the hitch is why you don't need to trim or cut any fascia.
I have added a link to the instructions for you to check out as well of the... view full answer...
Yes, the Thule Pulse Large Rooftop Cargo Box - 16 cu ft # TH615 will fit your 2019 Cadillac XT4. The Pulse can be mounted on your roof in such a way to allow you to access the rear hatch of your vehicle.
If you need a compatible crossbar system for your vehicle, I recommend the following setup:
- Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR
- Landing Pad... view full answer...
The Curt trailer hitch for your 2019 Cadillac XT4, part # C39FR, actually installs on the same existing studs and with the same hardware that the factory bumper beam uses. During the installation the bumper beam is removed and the hitch fits over the studs. Then you reinstall the bumper beam over the hitch and fasten them both with the same M10 nuts that you would have removed to take off the bumper beam. So, there are no holes to drill into the Cadillac's frame.
The install details... view full answer...
The plug you found at the back of your 2024 Cadillac XT4 should match up with the Curt T-Connector # C44FR and will only show power when the running lights are on, the turn signals are used, or you are pressing the brake pedal. If you're testing it without using any of those functions on your vehicle then that would explain why you aren't seeing power at that connector.
If you did use those functions and you didn't see power then the next thing to check are the fuses related to the trailer... view full answer...
The Curt Trailer Hitch Receiver part # C39FR which is a fit for a 2019 Cadillac XT4 is also a fit for a 2023 Cadillac XT4. I have attached an install video I did on this if you would like to check it out below. view full answer...
The best (and only) hitch for the 2024 Cadillac XT4 AWD is the Curt Class 3 Hitch # C39FR. This has a standard 2" receiver and is rated for 4,000 lbs towing and 400 lbs of tongue weight. The 2024 Cadillac XT4 is rated for towing only 3,500 lbs, so while the hitch is rated for a bit more, you will be limited to the manufacturers specified weight capacity when towing.
As far as installation, this is going to be a bit of a tricky one and I have good news and bad news for you. The good news... view full answer...
The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs # BWRVK3500 has a binding issue with your king pin. The cam action latching handle sounds like it isn't functioning correctly. If the head has been damaged, I recommend replacing it. If it isn't damaged and yet isn't functioning correctly, I recommend contacting the manufacturer about coverage under the limited lifetime warranty.
If you need to replace the head unit, the Replacement Head Assembly... view full answer...
Yes, once the Draw-Tite Max-Frame Trailer Hitch Receiver # 76266 is installed on your 2022 Cadillac XT4 you'll be able to place that rear bumper fascia cover back over it for an OEM look.
I'm attaching an installation video and some photos for you to check out about this.
If you're planning on doing some towing with this hitch then I also recommend picking up the T-One Wiring # 118795, the Mount Bracket # 18144, and the Ball Mount Kit # C45154.
Attached are some additional videos for... view full answer...
Yes, the Saris Bones EX 2 Bike Rack # SAR83FR is confirmed to fit your 2019 Cadillac XT4.
The Saris Bones EX 2 Bike Rack # SAR83FR does not come with any integrated locks. So if you want to lock your bikes to your rack, you would want to pick up a cable lock like the 8' Cable Lock and Lock Loop for Saris Trunk Mounted Bike Racks # SAR52FR. view full answer...
You'll be pleased to hear the base of the:
-Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 measures 32" before the bar starts to curve upwards.
I have also attached an image showing this measurement for you to check out. view full answer...
Yes, the Curt Hitch item # C39FR will be concealed by the rear panel when you are not using the hitch on your 2023 Cadillac XT4. This hitch is custom fit and bolts directly to your XT4 with included hardware.
I have attached an installation video and some photos of the hitch with and without the cover for you to check out.
If you are planning on towing you will also need a wiring harness item # 118795 and a ball mount kit item # C45534. view full answer...
By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SkyLine Towers for Yakima Crossbars # Y53TR
- Landing Pad 19 # Y00245
This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"... view full answer...
The correct Curt Trailer Hitch Receiver for a 2020 Cadillac XT4 is part # C39FR which features a custom, bolt-on fit without any drilling required. It has a 2" receiver that is great for anything from towing to hauling hitch mounted accessories around like bike racks or cargo carriers.
The Curt Trailer Hitch Receiver part # C13203 is not a fit since it's for a GMC Canyon/Chevrolet Colorado. view full answer...
Yes, it is! To add a 2" hitch to your 2024 Cadillac XT4, I recommend the Curt Trailer Hitch item # C39FR. This hitch is custom fit and bolts to your Caddy with included hardware. I really like this hitch because it installs behind your rear bumper cover and can be completely hidden when you are not towing.
I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like once installed.
If you are planning on towing you will also need... view full answer...
First you will need the Curt Trailer Hitch Receiver # C39FR for your 2023 Cadillac XT4. This receiver is custom fit and will fit behind the factory removable panel on your rear bumper fascia.
The 4-Way T-One Vehicle Wiring Harness # 118795 will plug into the factory connector just behind the impact structure on your rear bumper. This will be easy to install when you are installing the Curt receiver above. The Mounting Brackets # 18140 and # 18144 will allow you to secure the 4-way to... view full answer...
The Weathertech rear cargo mat # WT401231 that you referenced does not require you to have the rear seats folded down to install and fit properly. It fits right up to the back seats when they are folded up. view full answer...
Yes, you will be able to reinstall the bumper cover for an OEM look on your 2021 Cadillac XT4 after installing the Curt Trailer Hitch Receiver # C39FR. I have attached an installation video for you to see the finished product.
If you don't already have a bike rack, then I recommend checking out the Kuat NV 2.0 Base Bike Rack for 2 Bikes # BA22B because it has a sleek matte black finish and has built-in features that make it one of the nicest bike racks to use.
I've attached an installation... view full answer...
To attach a roof rack that does not extend past the flush rails on the roof of your 2024 Cadillac XT4, I recommend the roof rack by Yakima which includes the following parts:
Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y76UV
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
This aero bar roof rack system has a 165 lbs capacity and it does not extend past your roof rails.
I also recommend adding the Yakima Same... view full answer...
Go To Results