The only etrailer Reversible RV Outdoor Rugs that are close to 10 'x 20' are the 10' x 22' # e54CR or 8' x 20' # e22KR. The charcoal and gray is the only color option available. Any other outdoor rugs we carry are much smaller and don't come in black. view full answer...
The Classic Accessories RV Tire Covers for 24" to 27" Tires # 052963762402 are only sold in pairs. Unfortunately, the only option is to order two and have an extra cover. view full answer...
Sorry Art, the Airlift item # AL89DQ do not fit the duallys and Air Lift does not have an alternative product that does. However, I have a set of Firestone airbags with an identical capacity that do fit the dually models of the 2023 Ford F-350 so long as you have 4WD. There are no options for a 2WD F-350 in this high of a capacity that are compatible with in bed hitches.
They are the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item # F95FV. These air bags have a 7,500... view full answer...
No, the Replacement Load Bar Clip item # 8537361 is only sold individually. They do not come with a rubber gasket and we do not have it, unfortunately.
Additionally, the Replacement Load Bar Clip item # 8537361 work with older Thule fairings. If you have the newer Thule AirScreen Fairing item # TH62WV, item # TH72WV, item # TH82WV, or item # TH22WV, then the correct replacement clip is the Replacement Aero Bar Clip for Thule AirScreen Fairings item # 8528583001. view full answer...
Hey Mike, good question and the answer is yes, the 10" Rise/Drop Blue Ox High-Low Adapter # BX88132 is welded onto a solid metal shank.
This is a very robust part, and in fact one of the things our customers like most about is how well-built it is, as you can see in the reviews on the product page. Another great thing is the # BX88132 comes with a pin and clip so you don't have to get that separately. view full answer...
We do not have an ETA for the Curt Trailer Hitch Receiver # C97RV for your 2024 Chevy Traverse. We know Curt is actively working on it, which is why we have the pre-order listed on our site. If you go ahead and order the hitch we will update you as soon as we know and you'll be one of the first to get it. Wiring is not available at this time and we don't have a pre-order option for it. As soon as it is developed by Curt or Tekonsha we will have that listed as well. view full answer...
Hey Tim, thanks for reaching out!
The Stromberg Carlson Base Pad Extreme for RVs and Trailers # SC33VR have a 6,000 lb rating for each Base Pad Extreme so you're looking at a total of 36,000 lbs for this kit of 6. Ideally your jacks will have the weight distributed evenly among the jacks so there won't be any problems with too much weight on 1 individual Base Pad.
Unless you'll be placing a LOT of load on one Base Pad, you'll have a hard time overloading them with your setup. view full answer...
We have either the Standard Hub # 8-258-50UC1 or the EZ Lube Hub # 8-258-50UC1-EZ which will fit your spindle and have the ability to move to the larger 13" wheel size. These both have the galvanized finish and include new bearings, seal and lug nuts. You will need to get 2 of whichever hub style you need as the hubs are sold individually. view full answer...
Hey John we do have a potential axle option for you. We have axles with the 86.5" hub face, such as the Trailer Axle Beam # e33GR, which is rated for 6,000. This axle has spring seats at 71-1/2", and they are underslung. We are not able to weld on spring seats for you here, but we can sell you a few loose spring seats # TRSS300. You would just have to have them welded to the top of the axle tube in your desired location.
This axle is also available in a 5,200 lb capacity # e45GR if that... view full answer...
Yes, it is! To purchase just a pair of the T-Bolts from the Mounting Brackets for Rhino-Rack Sunseeker Awning item # RR31126 you will need two of the Replacement M8 x 16 mm Rectangular Head T-Bolt for Rhino-Rack Accessories item # RR89HB. They are sold individually.
The only way to purchase the nuts is with the Replacement M8 Nyloc Nut for Rhino-Rack Accessories item # RR36TB. It's a 10 pack so you'll have some extra ones. view full answer...
Hello Gary. It looks like the Curt Class 3 Hitch # C37RV for the 2024 Hyundai Santa Fe is still in production. As of right now (4/19/24) we are expecting them to be available by early-mid July. They are currently available for pre-order if you want to get your name on the waiting list. The 2023 model did use the same hitch for hybrid and non-hybrid models and this SHOULD be the case for the 2024 models, although this has not yet been confirmed by the manufacturer. We will know for sure... view full answer...
I wish I could give you an exact answer Don, but unfortunately I am unaware of a stainless version we will have of the etrailer Hitch Receiver Lock # e98881 with a 3-5/8" span. We do offer the Curt # C23519 which is stainless steel and has the same 3-5/8" span but unfortunately we do not have it available to be keyed alike if that is a concern. view full answer...
Glenn it does not look like we carry any 3/8" self tapping screws. We do have the Self-Tapping Screw # FA1131822 which is 1/4" - 14 x 3/4" or the Hex Screw # 101131802 which is #8 x 1/2" but no 3/8" unfortunately. view full answer...
Hello Joe. I can definitely help get you set up with Torklift Camper Tie Downs for your 2020 Ford F350. Does your truck have a trailer hitch installed on the back? If so, was it installed from the factory or aftermarket? Let me know because that will determine the correct rear tie downs. The # TLF2022 front tie downs will be correct for your truck. The rear tie downs will be determined by the type of trailer hitch on your truck.
The # TLR3500 are for trucks with a non-Torklift brand aftermarket... view full answer...
Hello 89 5,
We do have a 3,500 lb axle with 89 inch hub face to hub face and 74 inch spring center to spring center that will work with a hub that has a 5 on 5" bolt pattern, but the hub just needs to be purchased separately as they don't come in a single package. You can choose from either a hub and drum or idler hub and here's what you'll need:
- Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs # T3584F-EZ-8974
- Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K
OR
-... view full answer...
Hey Daniel, thanks for reaching out!
The connectors on the Replacement Stabilizer Motor # LC656216 are only available with the motor itself - Lippert unfortunately doesn't sell them separately.
Since it sounds like your motor is working just fine I recommend seeing if someone else has a motor that isn't working that you can just cut the connectors off of, or you'll need to hardwire everything instead. view full answer...
You still are going to have to pump it each time you want to use the Dometic Portable Camping Toilet # DOM34FR, it'll just require much less pumping than typical pump action toilets. view full answer...
Hey Robert,
Based on the pictures you provided it looks like you do have the Curt Bike Rack # C89JR. It has a tool-free anti-rattle device that presses against the inside of the trailer hitch to prevent movement and a 1/2" diameter clevis pin to fully secure it to the trailer hitch. Since the clevis pin isn't sold separately you could use the Curt Clevis Pin with Handle and Clip # C45805 or just pick up another 1/2" diameter clevis pin and clip from your local farm & home or hardware... view full answer...
Yes, and no. Rhino-Rack is the only manufacturer that has two out of the three roof rack components sold for an individual crossbar on your 2024 Ford Maverick. I have listed them below:
Rhino-Rack Vortex Aero Crossbar - Aluminum - Black - 54" Long - Qty 1 item # RRVA137B
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 2 item # RRRLKVAH
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK228
I checked... view full answer...
The K-Source Universal Towing Mirrors item # KS3891-2 snap on to the tops and bottoms of the factory mirrors on your 2023 or 2024 Ford Bronco and then you use the included snaps to tighten them down and make sure they're secure.
No, we also have them with flat lenses with item # KS69ZR. These mount in an identical manor but the 7-3/4" tall x 5-1/8" wide mirror face offers a flat view.
We haven't had a chance to test these out on a Bronco but I have linked a couple review videos below... view full answer...
Go To Results