bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Buick


  • Recommended 5 on 4-1/2 Idler Hub for a Dexter D20 Axle
  • Thanks for the picture and your patience! I just heard back from Dexter and your D20 axle uses the same inner and outer bearing of 1.063" which is item # L44649. I recommend the Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-545-2-LF-2K or item # AKIHUB-545-2-LFEZ-2K if you have an EZ lube axle. Both of these idler hubs are sold individually and have a 5 on 4-1/2 lug pattern.
    view full answer...

  • Will Stromberg Carlson Base Pad Extreme Qty 6 Be Able to Handle 20K 2019 Grand Design Momentum 397TH
  • Hey Tim, thanks for reaching out! The Stromberg Carlson Base Pad Extreme for RVs and Trailers # SC33VR have a 6,000 lb rating for each Base Pad Extreme so you're looking at a total of 36,000 lbs for this kit of 6. Ideally your jacks will have the weight distributed evenly among the jacks so there won't be any problems with too much weight on 1 individual Base Pad. Unless you'll be placing a LOT of load on one Base Pad, you'll have a hard time overloading them with your setup.
    view full answer...

  • Are Classic Accessories RV Tire Covers for 24" to 27" Tires Available Individually
  • The Classic Accessories RV Tire Covers for 24" to 27" Tires # 052963762402 are only sold in pairs. Unfortunately, the only option is to order two and have an extra cover.
    view full answer...

  • Availability of Trailer Hitch and Wiring for 2024 Chevrolet Traverse
  • We do not have an ETA for the Curt Trailer Hitch Receiver # C97RV for your 2024 Chevy Traverse. We know Curt is actively working on it, which is why we have the pre-order listed on our site. If you go ahead and order the hitch we will update you as soon as we know and you'll be one of the first to get it. Wiring is not available at this time and we don't have a pre-order option for it. As soon as it is developed by Curt or Tekonsha we will have that listed as well.
    view full answer...

  • Replacement Landing Gear for 1995 Sierra by Cobra
  • For replacement landing gear on your 1995 Sierra by Cobra you can use the Landing Gear Set # RVLG-8HDL. Since nothing matches your weld stop measurements you will also need to weld on new brackets # LC113511. This landing gear has a capacity of 8,000 lbs and uses the standard inside 15-1/2" and outside 17-1/2" measurements found on most modern landing gear. If you want to add a motor it is available separately # LC142178.
    view full answer...

  • Availability of Replacement Parts for Thule Helium Pro
  • We do sell parts for the Thule Helium Pro Bike Rack for 3 Bikes # TH9043PRO. We have the following available: -Replacement M8 x 30 mm Bolt for Thule Apex, EasyFold, or Helium Pro Bike Racks - Qty 1 # 852-3136-001 -Replacement HideAway Cradle Ratchet Straps for Thule Bike Racks - Qty 6 # TH536 -Replacement Anti-Sway Cradle for Thule Helium Pro Bike Rack - Qty 1 # 1500056002 -Replacement Anti-Sway Strap for Thule Helium Pro and Apex XT Bike Racks - Qty 1 # 1500056004 -Replacement Cradle...
    view full answer...

  • Trailer Ramp Springs For Loading Ramps
  • The Left # RS16933LH and Right # RS16933RH ramp springs are the only ones we carry designed for individual ramps. These have an 1-1/2" inner diameter.
    view full answer...

  • Correct Torklift Turnbuckles For A 2020 Ford F-350 6.75' Bed Supercab
  • Hello Joe. I can definitely help get you set up with Torklift Camper Tie Downs for your 2020 Ford F350. Does your truck have a trailer hitch installed on the back? If so, was it installed from the factory or aftermarket? Let me know because that will determine the correct rear tie downs. The # TLF2022 front tie downs will be correct for your truck. The rear tie downs will be determined by the type of trailer hitch on your truck. The # TLR3500 are for trucks with a non-Torklift brand aftermarket...
    view full answer...

  • Availability of Spindle Wear Sleeve for Dexter Hub 84545BX
  • We do not have spindle wear sleeves available for individual sale. Since you have the Dexter # 84545BX you can use the Bearing Buddy Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing # BB60002. This includes a stainless steel sleeve for the grease seal to ride on.
    view full answer...

  • Recommended 7,500 lbs Capacity Air Bags for a 2023 Ford F-350 Dually
  • Sorry Art, the Airlift item # AL89DQ do not fit the duallys and Air Lift does not have an alternative product that does. However, I have a set of Firestone airbags with an identical capacity that do fit the dually models of the 2023 Ford F-350 so long as you have 4WD. There are no options for a 2WD F-350 in this high of a capacity that are compatible with in bed hitches. They are the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item # F95FV. These air bags have a 7,500...
    view full answer...

  • Do You Carry a 17-1/2" Wheel With a 10 Lug Bolt Pattern?
  • The Taskmaster Steel Dual Wheel # TA29MR is our only 17.5 wheel with the 10 on 8-3/4" bolt pattern. We do also carry this wheel in the following wheel and tire packages. Provider 215/75R17.5 Radial Tire w/ 17-1/2" White Dual Wheel # TA56MR Provider 235/75R17.5 Radial Tire w/ 17-1/2" White Dual Wheel # TA36VR
    view full answer...

  • Is It Possible To Connect A Firepit With 20lb Tank Connection To My RV Propane supply?
  • What kind of fire pit do you have? All of the portable fire pits that we deal with, such as the Ignik FireCan Portable Fire Pit # GN24FR are designed to be used with a propane tank, and will have a hose with its own regulator. If this is what you have, it will not work with the already regulated propane coming from your RV, and there is no way to safely bring the two together. The only option would be to carry a separate propane tank which can be attached directly to the fire pit.
    view full answer...

  • Can The Trimark Baggage Door Lock 12054-37 Have The Lock Cylinder Replaced?
  • I do see your Trimark 12054-37 came keyed alike so every one of this model was keyed alike from the factory. These types of locks are typically not able to have the cylinder replaced as they made other models like the 16801-01 which used their KeyOne system and allow for cylinder exchanges. Trimark will tell you to just replace the entire latch assembly since they are all keyed alike. If you prefer to switch to a lock where they will be keyed differently than every other Trimark baggage...
    view full answer...

  • Is 10 Inch Rise Blue Ox High-Low Adapter Welded on Solid Metal Shank
  • Hey Mike, good question and the answer is yes, the 10" Rise/Drop Blue Ox High-Low Adapter # BX88132 is welded onto a solid metal shank. This is a very robust part, and in fact one of the things our customers like most about is how well-built it is, as you can see in the reviews on the product page. Another great thing is the # BX88132 comes with a pin and clip so you don't have to get that separately.
    view full answer...

  • Does the Replacement Load Bar Clip for Thule Roof Rack Fairing Come in a 4-Pack?
  • No, the Replacement Load Bar Clip item # 8537361 is only sold individually. They do not come with a rubber gasket and we do not have it, unfortunately. Additionally, the Replacement Load Bar Clip item # 8537361 work with older Thule fairings. If you have the newer Thule AirScreen Fairing item # TH62WV, item # TH72WV, item # TH82WV, or item # TH22WV, then the correct replacement clip is the Replacement Aero Bar Clip for Thule AirScreen Fairings item # 8528583001.
    view full answer...

  • Availability Of Curt Trailer Hitch For A 2024 Hyundai Santa Fe Hybrid
  • Hello Gary. It looks like the Curt Class 3 Hitch # C37RV for the 2024 Hyundai Santa Fe is still in production. As of right now (4/19/24) we are expecting them to be available by early-mid July. They are currently available for pre-order if you want to get your name on the waiting list. The 2023 model did use the same hitch for hybrid and non-hybrid models and this SHOULD be the case for the 2024 models, although this has not yet been confirmed by the manufacturer. We will know for sure...
    view full answer...

  • What Are The Temperature Settings For Everchill RV Refrigerator & Freezer EV77FR
  • Hey Karen, that's a good question, so I reached out to the manufacturer to get the temperature settings for the Everchill RV Refrigerator & Freezer # EV77FR. They said the temperature of the refrigerator goes down to 33.8 degrees at the lowest setting and 42.8 degrees at the highest setting. As for the freezer on the # EV77FR, they said it did not have a specific lowest temperature available, but is is controlled below 3.2 degrees
    view full answer...

  • Replacement 3-Diode LED Light for Aries Running Boards
  • Yes, we do! It is the Replacement 3-Diode LED Light item # AA2090204. This will replace one side of your Running Boards item # AA3036571. The light is sold individually so if you're having problems with both sides you'll need two.
    view full answer...

  • Availability Of Photos Or Videos Of The Demco Base Plate DM39YV On A 2021 Jeep Grand Cherokee 4XE
  • Hello Jason thanks for your question. I will start by saying that the Demco Base Plate # DM39YV for the 2024 Jeep Grand Cherokee is a very new base plate model. We have not had a chance to install one or take any pictures quite yet. That being said, we are located in Wentzville Missouri and we would be happy to install your entire flat tow setup. Or we can do just the base plate if that is all you need. Installing flat tow equipment is our specialty. You can give customer service a call...
    view full answer...

  • Are The Dexter Trailer Hub and Drum Assembly # DX68QR Sold as a Set Or Individual Quantity?
  • The Dexter Trailer Hub and Drum Assembly # DX68QR is for a single hub. These are not sold as pairs as they do not always have to be replaced as a set. We do offer the brakes for this either as a Set # 23-438-439 or the Left # 23-438 and Right # 23-439 separately.
    view full answer...