We do sell replacement tubes for the Yakima Rack and Roll trailers with the part # Y8880283. For just the tire you'd want the part # Y8880282 and you'd be set. view full answer...
Yes the roof rack on your your 2018 Audi G7 was made by Thule, so to get a replacement I would just need to know the number stamped on your lock core.
For example, if your lock core read N125, then the Replacement Key for Thule Racks and Carriers # THKEYN125 would be the correct key.
If you can provide me this information I'd love to find you a replacement key. view full answer...
We just confirmed with our contact at Stealth that the tongue weight capacity of the Stealth hitch part # 391AUDA417 that you referenced is 400 lbs. view full answer...
The T-bolts in the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 are going to measure 3/8" x 1" long. The next size up would be 3" long, but if you can let me know the product you're trying to replace the hardware for I may be able to find an appropriate hardware replacement kit for you. view full answer...
The # DM5939 is only compatible with the DA91 like the # DM8759131. Unfortunately, there is no option for manual lockout on a DA70 like the # # DM72VR. There are two ways you can keep your brakes from locking up with this brake actuator.
The first is to add a solenoid like the # DM11993. The other option you have is to switch out the brakes on your trailer with free backing brakes like # AKFBBRK-35-D. These brakes won't engage in reverse so there would be no need to add a lockout to your... view full answer...
Yes, the brake shoes and magnets are available as replacement parts for 12 inch Nev-R-Adjust brake assembly # 23-464. Some brake assemblies have expensive replacement parts and on those it makes more sense to replace the whole assembly. For replacement shoes, left hand side use # K71-675 and for the right use # K71-676. The magnet is # BP01-225. The cost of a magnet and shoe/lining for one brake assembly costs more than the whole assembly.
Going to disc brakes is a great idea. Not only... view full answer...
Yes, I checked with Curt and they confirmed that the Curt Trailer Hitch Receiver # C11448 on your 2018 Audi A4 does in fact fit your 2020 Audi A5 Sportback.
Be sure to use new hardware as it's only meant to be torqued down once. You can get replacement hardware as part # RHK. view full answer...
The 2004 Audi S4 sedan takes Thule fit kit # THKIT1212 for the Traverse foot pack. It comes with 4 mounting brackets and 4 foot pads. view full answer...
For your 2010 Audi Q5 we have the 2 inch Curt hitch part # C13136 which is a confirmed fit and would work well for carrying a bike rack designed for a 2 inch hitch.
Curt recommends the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well. view full answer...
If you have a Hide-A-Goose Gooseneck Hitch on your truck then you will need to use the Draw-Tite Hitch Ball # 19309 that you referenced as a replacement.
The Curt Replacement Ball # C60616 that you also mentioned is designed for the Curt Double Lock Gooseneck Hitches and will not work on your Hide-A-Goose because it features a completely different locking design. view full answer...
Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed # MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization. Also, with the powered lift feature, you do not have to go through the pain of having to manually lift the vent by hand. It also closes automatically with the rain/snow sensor to keep you dry.
I went ahead and attached a video that walks you... view full answer...
You have two options.
The first is that if there is a number on the front of the lock, you can replace the key by searching "THKEYN####" in our search bar, where #### is the number on the front of the lock. If you have less than three numbers, don't add any zeros. For example, a cylinder labeled "012" will be part # THKEYN012
The other option is to replace the entire lock assembly with part # 05011500000, which will include two keys for the lock. If the box is currently locked, you'll... view full answer...
According to my Thule representative, the # SR05587 is indeed the correct replacement hardware kit needed for your Sears X-Cargo model 28 roof mounted cargo carrier. Thule manufactured the X Cargo model 28 for Sears. view full answer...
We do offer the Replacement Hardware Kit # RHK which you can order to get the correct replacement hardware for the Curt # C13136, etrailer # e57AR, or Stealth Hitches # 391AUDQ509 receivers. These are the receivers we carry which fit your 2012 Audi Q5, so be sure to include the hitch number when ordering. I recommend contacting the customer service department your dad ordered the receiver from to see if they can send a replacement receiver with the hardware. view full answer...
The replacement gear kit for the Fulton # HD50000101 Marine Jack would be part # BD500156. If you should need a replacement handle assembly, that part is # BD500171.
The # BD500106 is not compatible with your particular Fulton Jack. view full answer...
We don't have a key for the base carrier on your Audi Q7 roof rack, but we do have a key for the luggage carrier. You will want the Replacement Key for Thule and Sportrack Racks and Carriers # THKEYN182. view full answer...
Yes, you will need the Thule rivet cover part # 14303 (color black) that will fit the rivets on your Thule Atlantis cargo box.
I also included a informative article about roof mounted cargo boxes for you too. view full answer...
It sounds as if you need the pigtail that connects to the American spec 7-way, is that correct? If so, you'd need part # PK11998. It's also sold together with the # HM40975 connector as part # HM40975-11998.
If you're speaking of the gray retaining clip, it is included with the # PK11998 pigtail, but it's not available as a separately sold item. The product description page for the # PK11998 pigtail provides the wire color coding if you scroll down the page I've linked for you a bit. view full answer...