We do offer front and rear floor mats that are designed to fit your 2007 Acura TSX.
If you are looking for Black floor mats I recommend part # WTW58. For the rear the black floor mats you would need are part # WTW50.
For Gray front mats you need part # WTW58GR, and for the rear part # WTW50GR. For Tan colored mats the front is part # WTW58TN and the rear is part # WTW50TN. view full answer...
The trailer hitches that are designed for the 2012 Acura TSX are all Class I hitches. This is most likely because this vehicle is not rated to support the heavier loads that a Class II or greater hitch is capable of towing.
Since you have a Sport Wagon model, the only confirmed trailer hitch to fit your vehicle is the Curt Class I Round Tube Receiver Hitch # C11085. This has a 200 pound tongue weight and 2,000 pound towing weight capacity. This is a custom fit hitch for your vehicle, so... view full answer...
For the Sport Wagon versions of the 2012 Acura TSX we gave the no-splice trailer wiring harness # 1192502KIT by Tekonsha. I attached an install video for you to check out as well. view full answer...
You have a lot of options for a two bike rack for your 2010 Acura TSX.
Since you don't have a hitch you could go with a trunk-mounted rack. The most popular models with our Acura TSX customers are the Thule Passenger part # TH910XT and the Yakima KingJoe Pro part # Y02624.
The Thule Passage is a good entry level rack for occasional use.The KingJoe with folding arms includes several key features, such as a low-profile design with folding arms, sturdy steel construction and an integrated... view full answer...
For your 2005 Acura TSX the only wiring kit I can safely recommend for you is the part # 46255 as the part # 118302 has not been confirmed to fit your vehicle. view full answer...
Yes, the Hitch Adapter # HTAD will work with your 2004 Acura TSX that has the Curt Class I Trailer Hitch Receiver # C11455 mounted. You are correct that it will reduce your total tongue weight capacity by 50% giving you a maximum of 100lbs of tongue weight for your bike rack and bike.
I did notice that the Aventon Level Step-Through e-bike has fenders and the 1UP USA 2inch Super Duty Single platform bike rack uses wheel mounts to hold the e-bike in place. If your bike does have these... view full answer...
I checked with Hollywood Racks and the Over the Top part # HRF2 that you referenced is a confirmed fit for your 2011 Acura TSX Sport Wagon. The great thing about this rack for your application is that it is designed specifically to work on vehicles with spoiler and would not contact your spoiler at all.
I attached a review video for you to check for more info as well.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested... view full answer...
For a cost efficient way to put a bike on your roof, I recommend starting with the Malone SteelTop Roof Rack - Square Crossbars - Steel - 50" Long # MPG201 and then adding the Swagman Fork Down # S64710. These are good cost conscious products to get you safely down the road. view full answer...
I do recommend a trailer hitch mount bike rack for your 2013 Acura TSX Sport Wagon. If you do not already have a trailer hitch, the most popular option is # C11496. I have included a link to a video showing a typical installation and a link to the instructions for you.
For a Class I compatible bike rack that will tilt down and allow better access to the rear of the vehicle I recommend the Thule T2 Pro XTR # TH23JV. This is a platform style bike rack that fits 1-1/4 inch hitches (Class... view full answer...
If you need a total of 57 inches of crossbar length then the 58 inches of bar length that the Malone rack part # MPG202 offers would work well for you. This is a confirmed fit for your 2012 Acura TSX wagon as well.
You should note that this roof rack has a capacity of 165 lbs and you'll need to also stay under the capacity of your vehicle that's listed in the owners manual. view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11455 which is a fit for a 2006 Acura TSX only has a class I rating so the maximum number of bikes that can be carried is two. I am aware the weight capacity of the hitch will likely allow for more than two bikes, but the issue is actually with leverage rather than raw weight capacity. For a bike rack, the Curt 2 Bike Platform Rack part # C18085 is a great option. view full answer...
All of the trailer hitches for your 2010 Acura TSX are Class I hitches with 1-1/4 inch receivers so in order to use an accessory, such as a bike rack, that has a 2 inch shank you would have to use an adapter, # HTAD. But the use of an adapter reduces the tongue weight capacity of the hitch by 50 percent.
So for example if you used Curt hitch # C11496, which has a tongue weight capacity is 200 pounds. But when using the adapter the capacity will be reduced to 100 pounds. As long as the... view full answer...
We offer one trailer hitch for your 2012 Sport Wagon.
The trailer hitch that will work with your TSX is the Curt Trailer Hitch, part # C11085. This is a Class l hitch and it has a 1-1/4 inch receiver opening.
The ball mount I recommend is the Curt Drawbar, part # C45521. For the hitch ball, if you need a 1-7/8 inch hitch ball I recommend part # A-80 and for a 2 inch hitch ball I recommend part # A-82.
For trailer wiring, I recommend the TSX ZCI Circuit Protected Vehicle Wiring Harness,... view full answer...
For the Class I hitches like the Curt # C11455 that fits your 2005 Acura TSX you have to use only the recommended ball mount in the recommended rise/drop position. For your situation the recommended ball mount is the part # C45521 which you'd need to run in the rise position. This provides a rise of 2-5/8 inches.
For hitch balls you'd then want the part # A-82 for a 2 inch ball or part # A-80 for a 1-7/8 inch ball. view full answer...
I do have an option for you but the Thule OutWay 3-Bike Rack part # TH56BV will not fit your 2014 Acura TSX Sport Wagon. Instead, I recommend the Yakima HangOut 3 Bike Rack part # Y02638 so long as you do not have the power liftgate. This is actually the only trunk mount 3-bike rack I have found to be a confirmed fit for your vehicle. The HangOut has anti sway cradles to keep your bikes from making contact with the vehicle/each other, adjustable arms to ensure the bikes are carried at a... view full answer...
You are correct about the trailer hitch and hitch mount bike racks for your 2012 Acura TSX. Class I trailer hitches available for your TSX can only hold 2 bikes. To carry 3 bikes I recommend a trunk mount rack, see link. A trunk mount rack is a more economical solution and they fit many vehicles (but not all).
Out of all of the 3 bike options my favorite is the Thule OutWay # TH56BV. I own this rack and I have to say that it is the easiest to use trunk mount rack that I have come across.... view full answer...
For you the Thule OutWay Trunk Mounted Bike Carrier # TH56BV would be the best choice for your 2011 Acura TSX Wagon. This rack is one of the best racks we offer because it uses retractable, rubber coated steel cables that can be locked to your vehicle instead of straps like most trunk mounted carriers.
If you plan on carrying women's or alternative framed bikes you may also be interested in purchasing a Thule Bike Adapter # TH982XT. I attached a review video for this product for you to... view full answer...
The Curt hitch # C11085 is a fit for your 2013 Acura TSX Sportwagon and would be a great option to carry a hitch mounted bike rack. As far as a lock for a bike would go that is going to depend largely on the bike rack you pick. Most racks have specific locks that have to be used with them which sometimes are included but sometimes can be purchased separately.
For example the Hollywood Racks Destination part # HLY94FR comes with a hitch lock but if you wanted to upgrade it to a lock setup... view full answer...
In the answer you are referring to it states that Curt trailer hitch # C11085 fits the TSX Sport Wagon, not the sedan. It goes on to say that the correct hitch for the sedan is # C11496. This is all still true for your 2012.
Since you have a 2012 sedan you will need hitch # C11496. There isn't any visible fascia that needs to be trimmed but underneath the vehicle there is a heat shield and trim panel that would have to be modified or trimmed for hitch installation.
If you plan on towing... view full answer...
When we installed Hidden Hitch trailer hitch # 60831 on a 2006 Acura TSX it measured 4 inches from the center of the hitch pin hole to clear the rear bumper. The Curt adapter # D-192 will not fit because it only fits in 2 inch trailer hitch receiver openings. And the MaxxTow MT70355 will not fit since it was for Class II hitches.
That leaves Brophy adapter # HT5R. It will fit a Class I hitch but the issue with it is that the back of the 2 inch receiver does not come out far enough to clear... view full answer...
Go To Results