To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Quickly and easily install a 4-way trailer connector on your Hyundai Entourage with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (115 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.Installed in 2011 Kia Sedona with reasonably ease and works great. If the control box could be a bit smaller/thinner that would be nice; it fit but with no space to spare.
It was way too easy
Got what I needed and fast! Ty
I really can not say as I was never able to use it. After installing it, the car was in an accident and all was surrendered as a total loss. I have since replaced the car but have not yet replaced the hitch. Having second thoughts.
Just got the trailer wiring kit (Tekonsha - model # 118410) yesterday afternoon and installed in a few hours (by myself) today. I did use the car jack to help with the wiring, but otherwise it’s pretty straight forward. The installation video for this part that’s provided on the Etrailer website is very useful. Anyhow, this wiring kit works well. I’ll write a review if I have any issue in the future, but otherwise, it works great.
Thank you to Etrailer for the great customer service, good products and instructional videos.
Ray
12/2/2020
The product has been working well without any issues. I use my trailer regularly. I am very satisfied with this T-one product. I definitely recommend to others who are interested in getting this product.
One positive, you did ship promptly. Every time I plug in the trailer the fuse to the interior lights blows, trailer lights are ok.
I paid Kia shop 100 $$ to tell me this. he tested all circuts and they were fine. I didn't have another $100 to take the trailer and try again.
This was the 3rd wiring product we ordered. the first was quickly burned out . so we bought a new trailer and tried your product, not happy. and you advertised it was exactly for this 08 Kia Sedona, custon fit you say. Any suggestions or improvements from your experts would be appreciated.
sorry no pictures.
Mike L.
1/29/2019
The harness you purchased is indeed compatible with a 2008 Kia Sedona. What youve describe indicates that theres a short somewhere in the trailer wiring. Youll need to begin at the trailer connector, and trace each circuit until it terminates at its lamp. Look carefully for pinched wires and loose connections. Look for nicks, cracks and worn spots in the wire insulation. If the copper conductor grounds out to the trailer frame, youll keep cooking taillight converters or blowing fuses forever until the problem is located and repaired. Check the bulb sockets in each lamp as well. A corroded bulb socket could also cause the problem you mentioned. Ill also link you to some troubleshooting articles that you might find helpful.
The tow kit the dealer installed in my 2011 Kia Sedona when it was new went sour after four years, so I bought the etrailer kit to replace it, figuring that the dealer would soak me hundreds of dollars to do the job and just put in another problem kit (I discovered that the kit they put in the new car had even been tampered with). The etrailer kit was reasonably priced, came with all the documentation and parts I needed and then some, is perfectly compatible with my vehicle, and works fine.
John Q.
6/3/2017
One year later, the kit still works fine.
The printed installation instructions were fine, although there are better ones on YouTube, including some vehicle-specific shortcuts.
This wiring harness is a replacement for the previous T-One harness, which had the controller die after only three years.
I see that there is a redesigned controller on this one. Hope it is more durable.
Elaine Z.
5/25/2016
Working as expected, and hope to get more than 3 years of use out of this one, as was the case with the first T-One harness.
Everything about my eTrailer experience has been absolutely first class, including the follow up emails, 2 of them. Due to a medical problem it's taken me over a year to complete the installation but that's on my end. I installed the hitch and wiring harness in May of 2016. I just now got to running the power wire up to the battery and finishing the job today, 8/2/17. Again, all due to issues on my end. The product, the personal assistance, and the videos made this job as easy as it could be for this 68 year old putting a hitch on a 2012 KIA Sedona by himself. Thanks to eTrailer for running a most excellent company in every regard.
Easiest job I’ve ever done with a wiring harness, and I didn’t have access to a lift. I just hope I did it right going by the suspension. The online video didn’t show that very well.
Bob
5/23/2019
Still going strong. It may outlast my old van.
I purchased a trailer hitch, wiring harness, brake controller and all the additional necessary wiring for my 2008 Kia Sedona. Other than issues I encountered unrelated to the items I purchased, everything installed smoothly and continues to operate as expected after 6 months. I would definitely recommend this site to anyone. In addition, their on point instructional videos made things even easier than I could have hoped.
Made the wiring so much easier, the kit was very complete. I did use several additional zip ties for the battery wire as I secured it in a lot of places along the under side of the Kia van.
Casey R.
3/3/2015
Thanks, Patrick every thing was great and working fine. Charles
This harness is well designed, comes with just enough wire to go where it need to go, and works perfectly! The instructions weren't very helpful, but a video on the etrailer.com website took me through it step by step. Overall very happy with the product!
It does exactly as it’s suppose to do. I’ve recently added a 7-way adapter and brake controller item # 39523 and added it to this product and works outstanding. All of which came from etrailer.com as does all my hitches and wiring needs.
One year follow-up. This worked really well and has been great. No problems at all.
The installation of this harness is easy and straight forward and took about 45 minutes to install. I would suggest watching the video about this installation.
Gene
4/24/2014
All is working fine. The first one I bought only work for 14 months then failed. So far this one is still working.gene
The product arrived quickly and well packaged. The directions are clear and easy to follow. I have not needed customer support.
One area could use improvement. The directions give precise directions on how to route the cable across the back of the van under the bumper skirt. The much longer run, the power line from the back of the van to the battery under the hood, simply says to route the line avoiding hot, sharp or moving parts. Suggestions for doing this would have been appreciated.
The directions also indicate that the control box, which is about the size of a playing card and the thickness of an Iphone, gets mounted below the left tail light -- it will actually fit into an existing recess in the tail light enclosure. This is a better placement because it is totally out of the weather and there is no possibility that the double sticky tape will give way and allow the control unit to drop toward the road.
In conclusion, it seems to be a well made and packaged unit which was reasonable to install (time about 90 minutes) and performs as advertised. I would recommend it to a friend.
Works well, and the video helped with the installation. Be aware that removing the taillights is not as easy as it appears in the video. You have to yank and pull and pry around to get the pins on the lights that go into grommets in the body to let go. I thought I was going to break those plastic pins until I saw that they went into the grommets on an angle. Be careful and it will be okay.
I got the wiring kit for a 2008 Hyundai Entourage van. It took at least 2 hours to install. Running the power wire from the battery to the left rear light was the hardest and dirtiest part. I cleaned off the under coating and hot glued the wire to the undercarriage and then put silicone over that. I didn't like the idea of the wire running near the fuel tank. Worked for me. You have to fish the wires through the bumper / body to get to the lights. It wasn't that easy to do. Also that bumper facia part is hard to get off being like jammed up under the van. Oh, I also soldered the wires, I've had problems in the past with corrosion with the crimp on connectors. Whatever, it got done and works. Sorry, no pictures, can't bring myself to crawl under there again today.
Very good product, shipping with tracking, etc. For me, the video clip was more helpful than the written instructions for my specific vehicle.
A word to the wise for 2008 Kia Sedona owners: if you're also going to install a Hidden Hitch (70761) at the same time, be sure to watch the video for both installations first. About halfway through the wire harness install, you need to remove four plastic screws from the bumper flange. It would be a lot easier to do that before you install the hitch, as the hitch blocks the two center screws.
Because wiring a vehicle for trailer lights was an entirely new task for me, I had some doubts it would turn out well. The instructions were very helpful and the job was successfully completed in a few hours. Working without a lift and working while lying on the floor under the van made things more difficult. I may have shorted out the battery. Be sure to disconnect the negative terminal before makeing any connections on the positive side. Bottom line is that etrailer is a good vendor to do business with.
No problem with the product. Getting the tail lights off was a little trickier than what it shows on the video. I pulled the first one off at the wrong angle and put a small crack in it. When you pull it, pull it more perpendicular to the side of the car then parallel (straight to the rear).
A few more wire ties in the kit would be nice, but maybe I went overboard.
Installed the wiring harness yesterday and had no issues with the harness itself. Have a 09 Kia Sedona and it was a pain to install the line to the battery and the line to the passenger side taillight. Getting the wire to the battery was a pain to get from the back bumper area past rear suspension. For the passenger side taillight, getting the wires up to the light was the hard part. There is a black plastic piece that goes on the underside of the bumper, took that off and it became much easier to get the wire up.
Item 118410--My son installed the wiring harness for the hitch we purchase from you last week. All needed parts were included and the instructions via internet were very helpful. I needed the hitch and wiring to tow my fishing boat--all is well, Thank you!
Ron Blough
First of all this was the third time i have ordered from etrailer and all three times have been so easy and ive seen my orders so up in no more than three days. In this last order one of the parts was on back order but when the box showed up it was in there. Not to forget i made a mistake on the order but called costumer service and talked with cathy and she was a joy to deal with. She straightened out my order and made sure it got processed that same day so i would see it before the weekend and sure enough it showed up fri.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
11/10/2023
Its been a year and the wiring kit has been working with no problems.