SumoSprings Solo Custom Helper Springs - Front Axle

Seem like a great product, easy to put on bought them so I could put Plow on my truck. To be honest I put the plow on and have yet to use it because of the weather with little snow and no use for the truck yet!1727119

by: Josh L.12/03/2020

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit works great had for over a year pair them with SumoSprings solo custom helper springs and truck tows great even when I have 14k pounds on my trailer. An most I have ever squatted is around 2in in rear with my 2016 f250.918864

Everything was great but the most impressive part of this Company is their Customer Service. In particular, Vicki N was very helpful and professional when ordering my parts.1520518

by: Scott 06/27/2023

They work great 1610398

Easy to install with basic hand tools. Did not need the spacer on my install since the springs sat right on the axle after I let the jack down. Ride(bumps) and cornering seems to be much better/less harsh. These I gave 5 stars since I can tell right away they helped.519269

This install could not of been any easier! Both fronts with truck on Jack stands and wheels off took :10 min total…1260921

by: Sam D05/08/2022

Received delivery on time-also it is very easy to instal. Springs fixed my problem!1295647

1729212

1309623

by: Jeremy01/04/2023

I installed Sumo Springs on our 06 Xterra right after we bought our Casita 17' trailer. The back of the X squatted a bit more than I liked. I had also noticed before some tendency to bottom out if the car was full of people and stuff. These ingenious devices are a perfect solution for me! They are about 3/4" clear of being engaged with the axle when unloaded, so the ride is not overly affected, but progressively take up some of the weight when the back end starts coming down with load. It now sits very nicely with the trailer connected, no weight distributing hitch and stuff in the back, and no more bottoming. We've put a good number of miles on the X in the last year, towing and not towing, and they are still doing the job.

I should note, the back of my Xterra is lifted about an inch with AAL springs. If that were not the case, the Sumo Springs would be engaged all the time. That will vary with vehicle.

I will also note that they are non-adjustable, unlike airbags. I kinda like that, I didn't want to mess with adjusting air pressure and such. But once they do start kicking in as one or both wheels travel, they do stiffen it up quite a bit. I mean, there's no way around that; you can't take load without stiffening the suspension. As such I think they inhibit upward axle articulation a bit when 4-wheeling, but for us that's not a big deal. Since they do not connect to the axle, they don't affect downward articulation at all.

The pics are shortly after installation, one with the car unloaded, and two with trailer and gear loaded up.1492849

Click to Enlarge

Click to Enlarge

Click to Enlarge

I believe it’s going to be a great addition to my truck when pulling our RV. Looking forward to a smoother, more even ride. I left the 2x4 blocks in overnig8ht and drove around to ensure a good seat for the springs.1540479

Click to Enlarge

Very easy installation in about 20 minutes. Very ingenious concept as opposed to bolt on leaf style helper springs1552548

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Dan08/01/2023

These Sumo Springs were easy to install, even for a 70 year old guy. I tow a 7,000lb camper and even tho I have a nice WDH I still had som sag on my Tundra. These helped level it out when towing and got rid of “some” of the bounce. They were really a godsend when I overloaded the bed with about 2,000lbs of pavers. That weight squished the Sumos significantly but the truck drove and rode great. Better and less expensive than air bags.1636874

Click to Enlarge

The SumoSprings Solo came to the RV Resort today. I installed them on my Titan SV today in less than an hour. Only drove 10 miles with them and they are what I was looking for. In my opinion it was a needed upgrade and thumbs up!1323587

Click to Enlarge

Click to Enlarge

Click to Enlarge

Gave it 5 because of ease of install - note they use SAE threads 9/16, truck frame and oem is metric 15mm wrench. Makes no difference but don't use oem nuts on spring. I installed all shims supplied and this left about 3/4" gap so hoing its the best for my needs. Easy to reduce if needed.1522522

Click to Enlarge

Click to Enlarge

by: William01/13/2024

I have had these on my Jeep Gladiator for over a year now and I still like them. Sumo Springs really help with sag when towing my Scamp camper trailer and when the truck bed is loaded with stuff. When it is cold outside they are stiffer and I can feel when they hit the stops on hard bumps. Sumo Springs are a very easy overload spring option with factory lift.1710020

Click to Enlarge

by: Zach01/24/2024

While these worked great for the first few months and helped level the load, they have now become deformed and squished out of shape permanently. We have a slide in camper that is on the truck for only for trips otherwise the truck is unloaded and off the bumps. I did not expect them to deform so much, and so easily after only a year of use.1713830

Click to Enlarge

Fairly simple to put on but need to work around the brake lines and bed cross beams. I haven’t tried it yet with weight. I have enclose pic of drivers side. Maybe can’t tell from the pic but there is space and flexibility around the lines around bolt.1748975

Click to Enlarge

Click to Enlarge

Click to Enlarge

Straight forward, simple, replacement for OEM springs. These springs make contact with the lower arms all the time and definitely help dampen the bounce effect from a heavier steel bumper. Any rolling effect from uneven roadways and turning is also reduced, it feels the vehicle is more stable. For my situation, this is the first step to take before considering replacing shocks, etc., and is very economical. I'll give it more time, but I believe this is all I'll need to do. Thanks etrailer! Quick shipping!1530885

by: Kevin 04/29/2024

They worked pretty good. They kept my vehicle from bottoming out when towing my 5th wheel camper. They also helped to avoid bucking and chucking upon acceleration. In addition to these though I also purchased RAC rear suspension enhancement springs but having towed with them yet. Hoping for some improvement in general handling.1775533

by: Robert04/04/2024

Hello, i installed the Sumo springs on my 2020 M/B 2500 pleasure Way camper van 19.5 foot, if you do not want to go in for the full suspension upgrades for 5 to 6 thousand dollars the Sumo spring is a
decent up grade to help with sway, we aren’t off roaders campers
but they work nice in unimproved campsite. I have about 4500 miles on my camper since I installed them which took about a hour. It did raise the camper by about 1/4”.
I just used a floor jack and big flat screw driver for the back and deep well socket for the front ones. Sorry I didn’t take a video or picture. But so far I would recommend the sumo springs it is better then stock bump blocks.
And thanks to etrailer for getting me the right setup
for my camper.1759548

Very impressed. Stopped the Tacoma lean. Also helped with the trailer. I do use a distribution hitch I bought from etrailer. Just bought the sumo spring for other applications. Those little bitty factory bumps where junk. These help with lean, and off road hard bounce.They are great.
1370702

Great upgrade from the oem jounce. Easy to install with 2 people but follow the install video and use a 1/2" deep socket with a long extension. Took about 30 minutes.1558277

First off, these won't fix worn out suspension components, they are designed to improve ride quality by reducing sag/porpoising, especially on heavier vehicles.
Our 2010 Roadtrek 210P (75k miles) is a great rv but essentially a big heavy tub going down the road. Has the tendency to lean and wallow front to back. New shocks and all suspension is good, as mentioned make sure that stuff is all in good shape.
Pics show the oem stops vs the SS stops. Big difference - you may assume ride gets harsh but not the case. The oem stops were very tired and didn't do much. The preload on the new SS stops is just about perfect - any weight changes are very progressive which takes the harshness out of the ride. I didn't really see any change to ride height either.
Road manners are improved, there's a bit more resistance to lean, but the main difference is that the front end doesn't try to change height as readily with the back end.
Not a big deal to install. Youbdont need to pull the wheels, just turn them side to side to get to the stops. Pop out the old stops and clean the retaining cups with a wire brush and some brake clean. I used syl-glyde on the new stops to help get them into place. I also used a crowbar under the stop to push it into the cup while making sure the 4 tabs captured the top of the stop. Final step was to lower the van and give it a drive, then check to ensure the fit was good. The key here is to clean the cup first and use a bit of lube on the new stop.

Very pleased and I'll be installing SS on the back end soon. Yup, they're pricey but they are good quality with a limited lifetime warranty.1236734

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Kris03/16/2023

So glad I found these! Best upgrade for my Winnebago Era Touring Van. Simple to install. I only needed a floor jack to get it done. Van doesnt ride like a boat in a storm anymore. Highly recommend for Sprinter vans.1537602