RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty
(721 reviews)
Price: $589.00
RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty
Item # RAS3623-HD
Our Price: $589.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Need help with installation?
Locate installers near me- All Info
- Reviews (721)
- Q & A (0)
- Videos (1)
- Photos
RAS Vehicle Suspension - RAS3623-HD
- Leaf Springs
- Rear Axle Suspension Enhancement
- Heavy Duty
- RAS
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Features:
- Heavy-duty custom kit converts your vehicle's factory leaf springs into a mechanically active suspension system
- Actively strengthens leaf springs for improved ride quality with or without a load
- All-in-one suspension system improves stability, handling, and control
- Eliminates axle wrap, wheel hop, and bottoming out
- Reduces dangerous sway and body roll while cornering
- Keeps your ride level when towing or hauling a heavy load
- Improves traction while breaking and accelerating
- Variable-rated coil tension springs automatically adjust to your vehicle's load
- Activate immediately to support the extra weight
- Disengage when unloaded, allowing your leaf springs to perform as intended
- Customizable coil springs can be adjusted during installation to accommodate your towing or hauling needs
- Independently adjustable for side-to-side leveling of off-center loads
- Helps extend the life of leaf springs, shock absorbers, shackles, and even tires
- Durable, epoxy e-coated steel construction
- Corrosion-resistant brackets on the ends of each unit have a salt spray rating of more than 800 hours
- Easy, bolt-on installation - no drilling, cutting, or welding required
- Unit secures under the leaf spring and around the factory U-bolts
- Fully assembled kit and hardware are included
- Maintenance-free - adjustments and monitoring aren't needed once installed
- Made in the USA
Specs:
- Weight capacity: 3,000 lbs
- RoadActive Suspension will not increase your vehicle's weight-carrying capacity
- 5-Year warranty
- 30-Day money-back guarantee
All-In-One Suspension System
When towing or hauling a heavy load, you may encounter a number of problems that can make your driving experience difficult or dangerous, such as sway, body roll, or bottoming out. When your vehicle is weighted down, your factory leaf springs can't counteract these problems to the extent that they are supposed to. The weight will overpower the leaf springs and cause them to twist or flatten out. When that happens, they cannot support, level, or stabilize your vehicle effectively. Additionally, because your factory leaf springs are passive, they won't begin to tackle problems such as sway until those problems have already started.
RoadActive Suspension (RAS) kits enhance those passive leaf springs by converting them into a mechanically active, all-in-one suspension system. RAS kits have variable-rated coil tension springs that automatically adjust to your heavy load. Other suspension systems only solve a few problems and usually at the expense of other improvements your factory leaf springs may need. RAS, on the other hand, is a unique kit that provides everything you want in a suspension system without any trade-offs. It eliminates bottoming out like air springs, reduces sway and body roll like sway bars, keeps your ride level like helper springs, and improves traction and braking control like traction bars. This improves your vehicle's stability, handling, and control while you are towing or hauling, as well as when your vehicle is unloaded. RAS also makes your overall driving and towing experience safer and more comfortable, which greatly lessens driver fatigue.
How RAS Works
Each RAS unit has a powerful variable-rated coil tension spring that converts your passive leaf spring into a mechanically-active system. Once your vehicle is loaded, the tension springs immediately activate to absorb and support the weight. This allows your leaf springs to maintain their bowed position and keeps them from flattening out or flipping over, which greatly hinders their ability to bear a heavy load. The tension springs are variable-rated, which means that the heavier your load is, the more assistance they provide to your leaf springs. Because of this design, RAS reacts instantaneously, whereas hydraulics, air springs, and other suspension systems take time to react. And unlike your factory leaf springs, RAS stops sway and sag before they even start to happen. Additionally, when your vehicle is unloaded, the tension springs disengage, allowing your leaf springs to perform as intended without hardening your ride. RAS won't hinder your leaf springs' movement, nor will it cause any friction between any of the brackets.
Eliminates Axle Wrap and Wheel Hop
When under a heavy load, leaf springs are especially susceptible to axle wrap, which can cause wheel hop. Wheel hop is when the tires lose their grip on the road, causing a jarring, up-and-down movement. Axle wrap occurs when the circular motion of the tires cause the leaf springs to twist or rotate. If the leaf springs twist far enough, wheel hop can occur. RAS stabilizes your leaf springs by absorbing the force of the load they're trying to support. This eliminates axle wrap and wheel hop, as well as prevents your vehicle from bottoming out. Because of this, less strain is put on your vehicle. And by reducing some of this wear and tear, RAS helps extend the life of your leaf springs, shock absorbers, shackles, and even tires.
Reduces Sway and Body Roll
When driving along a curve while towing or hauling a heavy load, the back end of your vehicle or trailer can start to shift with that weight. If your factory leaf springs have flattened or twisted under this load, they won't be able to prevent it from shifting. Because of this, your trailer will sway away from your vehicle. This makes driving challenging and dangerous, as it increases the risk of body roll, which is when your vehicle drastically leans to one side. This can often cause you to completely lose control of your vehicle. Body roll is especially prevalent with multi-passenger vans and vehicles towing long campers, trailers, or boats. RAS provides a much safer ride by reinforcing your factory leaf springs and stabilizing your load. This helps prevent sway from occurring and reduces the chance of body roll while cornering, turning, and swerving. RAS also lessens the rocking motion that happens during windy conditions or when a semi passes by on the road.
Levels Your Ride and Improves Traction
When your vehicle is overloaded, the bulk of the weight transfers to the rear axle. Your factory leaf springs then become overwhelmed by this weight, as they are not strong enough to support it. This causes the back end of your vehicle to sag and the front end to rise, which means that the front tires have lost some of the grip they need with the road. In addition to loss of traction, it can also cause poor headlight aim, unintentional swerving, and an extremely bumpy and uncomfortable ride. RAS bolsters your factory leaf springs and enables them to provide support for your load without compromising ride quality or comfort. This keeps your ride level from front to back whether you are hauling a load in the bed or towing a boat, trailer, or camper. RAS also ensures that your tires have the traction they require while braking and accelerating, which improves the overall driving experience.
Customizable Coil Tension Springs
RAS is also customizable. During installation, the coil tension springs can be adjusted to 2 different tension settings or anywhere in between for improved road handling and support. To do this, rotate the springs while keeping the threaded rod still. As you turn the spring, use one of the 2 included spacers as a gauge to measure the widening gaps between the coils. In order for the RAS units to work as intended, you must tension the coils to a minimum of 25 percent with the 1mm white spacer and no more than 40 percent with the 2mm spacer. The springs can also be independently adjusted to compensate for off-center loads such as a handicap lift.
Easy, Bolt-On Installation
This custom-fit kit comes fully assembled and is easy to install. Each RAS unit simply bolts onto your factory leaf spring with the included hardware, and drilling, welding, and cutting aren't required. First, position the eye hook bracket so that it wraps around the top of the factory leaf spring eye. Then the axle bracket secures under the leaf spring and around the factory U-bolts on the other side of the leaf spring pack. Once the maintenance-free RAS units are fully installed, you won't need to monitor them as you would with air springs.
Corrosion-Resistant Steel Construction
RAS is extremely durable and corrosion-resistant. The units are constructed of high-grade alloy steel, and they have an epoxy e-coat on the coil springs to provide extreme corrosion resistance. The brackets on the ends of each unit resist the effects of water and other elements, and they have a salt spray rating of more than 800 hours.
3623-THD RAS Custom HD Active Suspension System for OEM Leaf Springs - Rear Axle
3623-HD
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2023 Ford Transit T250 Cargo Van
- 2015 - 2023 Ford Transit T250 Passenger Wagon
- 2015 - 2023 Ford Transit T350 Cargo Van
- 2015 - 2023 Ford Transit T350 Passenger Wagon
Video of RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Roadmaster Active Suspension Leaf Spring Kit Review
What's up everybody, Adam here with etrailer. Today, we're gonna to be taking a look at a very popular suspension enhancement kit for your truck. And it's the Roadmaster suspension enhancement kit. Be sure to use our fit guide, put your vehicle's year, make, and model in there, and that's going to give you all of the compatible suspension systems that you can get for your truck. So this add-on component isn't going to require us to take any of the factory equipment off, so I really liked that. Buy a new truck, you want a little bit more help with the suspension.
You don't really have to remove anything that's already there, that's kind of cool. So another thing that's nice about that, adding another component that's going to take some of that load is just going to put less strain on your components. So these three leaf springs are handling, let's just say, 5,000 pounds. Now we have a fourth component, so that can be divided by four, instead of three. It's just gonna prolong the life.
It's gonna prevent any axle wrapping, any bottoming out of any sorts. And this is going to be a lot less maintenance than your typical airbags. And the cool thing about it is just like airbags, we can kind of adjust it, but this one we can as well. I actually think that this is a lot smoother than airbags because I've ridden with air bags, with no load on them, and it's like riding just on bricks. It's feels like there's not any suspension at all.
So the coil springs really gonna help that. It does have a powder-coated finish to it as well, so it's not really gonna rust away over time. So, I definitely think that this is probably one of the best things you can get for your truck. And even above airbags. This is also gonna help limit your sway that you might feel whenever you're going down the road, whenever you're hauling something.
A lot of times, whenever your trailer gets off centered, the opposing side of your suspension's gonna kind of correct for that. But having a little bit more support is gonna be good because it's not gonna over-correct and that's when all that crazy sway starts to happen. Also, with air bags, a lot of the times you don't have a whole lot of travel. We're not really limiting our travel here, we're just kind of beefing it up a little bit. With limited travel, whenever you hit bumps and stuff, sometimes you start hopping your back end off of the road whenever we're not hauling something. With this, we're not gonna have to worry about that just because it's just a little bit tighter suspension. It's not really completely locking it in with a set of airbags. Comparing them to upgraded bump stops. A lot of them that we sell are just a little bit bigger than this, so they start to hit the axle a little bit sooner. But, whenever the suspension isn't sagging that much, you're not really getting the benefits of it, because it's only activated when it's under load. So this it's activated and right now. So you don't really have to worry about you getting to that point for your upgrade to start kicking in. With this, you can have it kick in right on the get go. Well I called my buddy Joe and he's to put some weight in the back of the truck. This is about 1500 pounds, give or take, so it's quite the load. Oh wow. I can already see the spring workin'. So this is gonna be very interesting on our test course. Thanks, Joe. You're the best, I really appreciate it. Ooh nice. Right as he lowers it down, I don't know if you can see it on camera, but that spring is definitely workin'. Less load on my leaf springs. That's what we're really going for here. Oh wow. I can definitely tell a difference. My truck is typically not happy with this much weight, but it just feels tighter. Meaning, I just feel like the suspension is doing more sooner, just so I don't hit those overloaded springs down at the bottom. Cause' that's when you can start really messing stuff up, you overload em' too much and then release strings will not work as well anymore. You're looking for the easiest way to beef up your suspension, but also have some adjustability. The Roadmaster suspension enhancement system is gonna be great for any type of truck that you may have. These are definitely something that I would use. And again, this was the Roadmaster suspension enhancement kit, and I'm Adam with etrailer..
Customer Reviews
RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty - RAS3623-HD
Average Customer Rating: 4.7 out of 5 stars (721 Customer Reviews)
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.by: Russell09/01/2022
I received this kit in a very timely manner always do from etrailer have some issues with the instructions that come from roadmaster not a trailer the bump stop spacer didn’t say that you need to use the original bolt from the bump stop so it slowed me down greatly on the install however I took it out on a quick run without a load I do feel that this has made the unloaded ride smoother tomorrow I’ll be taking the trailer out for a bit and we’ll see how it works there and I’ll update this rating.
by: Keith08/26/2022
Admitedly, I haven't even rolled my '07 Silverado 2500HD classic out of the garage yet, but I'm already very pleased. I had to go to a neighbor for a 10mm hex key socket and was slowed down by my 7yo kid 'helping', but it was still only 90 minutes my jack stands were in use. Easiest thing to do!
My only small downsides so far:
* needed to find a 10mm hex key that I apparently don't own, not sure why they picked that fastener
* wish I put some loc-tite on; just to make me feel better
* distance to drop the axle so the suspension fully hangs was way further than I expected; barely had my jack stands tall enough to get the job done.
These aren't really bad on the product, just notes for future customers. We're towing the 5er about an hour an a half this coming week, hopefully it steadies up a lot!
by: Michael06/21/2022
Overall, very happy with the product. GMC didn't have any way to improve the truck from squatting when I hooked up my trailer. This kit didn't stop the squatting but significantly reduced the bounce on bad dips in roads, bridge/road transitions and bad railroad crossings.
by: Julien04/16/2023
I bought this last summer (2022) for my 2020 F150 to haul the travel trailer (summer) and to have the quad in the box (fall) during the hunting season. I mainly used it during the weekends as I work from home during the weekdays. I adjusted the tension just before the winter because I haven't haul anything during winter. As it is now spring, I wanted to adjust back the tension for the rv season and I found everything rusted out (I am.in Canada and use the truck only 2-3 times a week).
I was pleased to use the product back last summer but because of all the rust I found this spring, I'm having a hard time adjusting them and I am also quite scared for next seasons as rust is making adjustments hard.
By having this for less than a year, I am now dissapointed in the product. Before buying this, I looked a lot into airlift a lot but because of reviews, I changed my mind to go with RAS.
Rust is now found on the main threaded rod locking nuts the bolt/tube underneat locking the device was rusted and seized.
by: Eric S07/30/2023
Rarely adding an aftermarket "upgrade" to any of my vehicles am I 100% satisfied with the outcome. There is usually a trade off with something. However, this is one of those upgrades that has zero con's that I've discovered so far. I was struggling to keep the leaf springs on my modded out 3rd get Tacoma from "flattening" out because I always have at least 900 lbs of payload in my bed. Adding the RAS has prevented this from happening. I also thought that they would affect off road performance, since I've never seen them in an off road application before, they don't. People on the trail often ask "What the heck?" when they see them on my rig. I tell them that RAS is the easiest to install, most cost effective solution to manage sag without sacrificing ride quality. There is the famously noted "Taco lean" and it's most prominent after fueling up. RAS will help iron this out. I've had them on for about a year now and they haven't needed any adjustments. Kinda like (Ronco), "set and forget it". I don't know their duty cycle is but, I wouldn't hesitate buying them again!
by: Jim01/08/2024
Installed this today on my 2023 Ford F150 Lariat 4x4 with the tow package. The kit arrived within 2 days of ordering. The box was slightly open but the springs appeared undamaged. I elected to do the install myself and opted to get a 4 ton floor jack to replace my very old 3 ton. I’m very glad I did. After blocking the front tires and setting the parking brake, I loosened the wheels and raised the rear at the differential using a small 2x4 block to span the contact points. I took the wheels off and originally set my jack stands in front of the leaf spring on the frame. Lowering the truck onto the stands was not effective. There wasn’t enough travel to provide relief to the springs. I ended up setting my jack stands on some 1x16 scrap pieces and put them under the spring attachment point. This gave me just enough room on my floor jack to unburden the springs. Once I got over this small hurdle the install went smoothly. This took about an hour to very carefully construct as I didn’t want to drop my brand new truck on the ground. Brand new 5 ton jack stands would have eased my mind considerably. My install includes a spacer for the bump stop to offset it towards the centerline of the vehicle. The instructions weren’t intuitive and it took a few minutes to figure out the bolts. You need to insert the provided bolt into the spacer and attach the spacer to the frame with the original bump stop bolt. It’s the only one you can get a socket on in the depression. The bump stop then attaches to the provided bolt you inserted into the spacer using the provided nut. You will need a deep well 15mm socket for this attachment. Fortunately I had one. I set the spring using the 25% white spacer, reinstalled the wheels and set the truck back on the deck. The truck now sits 3/4” higher in the rear. I drove around and noticed that I was sitting a little higher as the site picture changed a bit. The truck didn’t seem to ride differently empty. If anything it seemed a little more cushioned though no less responsive. I towed my 9000lb travel trailer previously with a Ram 2500 6.7l diesel that had Sumo springs and a WD hitch. I got tired of the cost and maintenance and selected this Ford because it could haul the trailer. I chose the RAS over the Sumo springs because of how much squat I observed when I hooked up the trailer initially. I will update after I tow the trailer. My only concern at the moment is that the bump stop spacer isn’t going to provide enough clearance from the bracket.
by: Miguel07/09/2021
I love the product since i have a 2021 toyota tacoma crew cab long bed with a campertop a robber mat and a jack thats around 450 pounds that a have at all times my truck was sittind low a lilbit plus it was swagging on the road i have summo spring to help my suspention but it was not enoght so i did my research but this was my better option i just installed it yerterday july-8-2021 and went for a ride where i ussually drive everyday and WOW now my truck rides very smood plus it lift my tryck 1 inch on the back now my tryck seats level it took me about 2 hrs but i did right i just follow the intructions and done i love the product the only thing that im concern is that the left side underneat the springleaft there is a breik line that is too close to the roadmaster suspention i hope that with the time dont hit that line because if it does thats the line for the breiks and i will be in trouble replacing it other wise evreything works great i recomend it 100% thanks guys i will buy it again?????best $500 that i spend on my truck
by: Steve01/08/2024
Love this product. I ordered a set for myself just before Christmas and I was so impressed that I ordered another set for my son’s truck. I was kind of worried that it would raise rear end too much but that wasn’t the case at all. If it raised it at all, it wasn’t noticeable. Definite improvement in handling bumps, cornering, and it eliminated any squat due to my pin weight of the 5th wheel. Highly recommend for an easy install (45 minutes) and overall ride improvement.
by: Jeff 08/22/2022
Follow up to my earlier review.
On top of the excellent care and service from etrailer, the roadmaster active suspension was easy to install. My Travel Trailer has a 1200lb hitch weight so I used the black spacer. The RAS gave my truck a 1 1/2” lift. I had recently loaded my truck to the top of the sidewalls with wood for the winter. Barely put a squat in the suspension. The truck handled on the highway like it had a quarter the weight. There was no noticeable sway or body roll. Unloaded the truck handles better than it did with just the leaf springs. Does not feel like hockey puck suspension. Love the RAS kit. My truck is a 2018 Ford F-150 eco boost with the max tow package. Looking forward to hooking up the Travel Trailer this fall.
by: Sergio08/12/2020
The bed of the truck measured 37.5" with a tool box weighing 200 lbs. The truck felt weighed down with passengers weighing 600lbs. Total weight 800lbs with a tank full of gas. After the install the truck rides smoother and certainly " like new". The stopping distance and acceleration distance have shortened drastically. I'm planning on loading up the bed and the Roadmaster Active Suspension RAS4611. My wife even drive it and she could feel the difference. "It drives like a muscle car." Buy it. Install time at a reputable mechanic shop was a 30 min. Install. I received them today at 1 pm and got it installed at 3:00 pm and finished the install at 3:30pm. It's an investment worth the price over traditional air bag system. Mechanic installed this on 2011 Nissan Titan SV.
by: Michael 01/17/2023
This system allows OEM ride in my 21 Silverado Z71 when a trailer is not being pulled. I have pulled an 8000 lb work trailer, and a 5000 lb travel trailer, with barely noticeable squat of the truck. This kit really seems to stabilize the back end when pulling a trailer. I'm very pleased.
by: Rick Maybury03/26/2021
I have a 2020 Silverado 1500 6 cyl Duramax with the Diesel Off Road package (3.73 diff). Travel trailer loaded is probably about 6,000 lb. I took several measurements during and after the spring kit installation. All measurements increased about an inch including the stock suspension with trailer and equalizer bars and with the spring kit installed at 1 mm spacing. A one inch improvement overall. I took the truck on a short drive and didn't notice any difference in ride (wasn't stiffer) which is what I wanted. Good to know that I can adjust the springs to the 2 mm spacing if I want to increase the suspension assist. Going camping next week and looking forward to see how it improves handling and porpoising.
by: Michael C03/13/2024
Good quality part & easy to install. Instructions were on point as well. Once I set the truck down I did a small test & jumped on the bed a few times. I can instantly feel the difference!!!
by: Rich03/05/2020
Easy install 2011 Tacoma crewcab long bed. Helped with sag when towing microlite travel trailer. Keeps the rear end raised in the rear a little when unloaded, but I like that look. Only complaint and its nothing big when truck is unhooked and empty when i get out I can hear alittle noise from RAS. Sort of like a bedspring coil. Night pic is with RAS installed daylight pic is with out installed
by: Michael 03/05/2023
Tha RAS Suspension Kit made towing way more enjoyable. Glad I purchased it.
by: Tracey04/28/2021
Total transformation! I never knew how bad my ride was until I installed these RoadMaster 3611-HD active suspension. It took longer to safely jack my truck up and remove tires than it was to install them! Absolutely a game changer. I carry about 1000 lbs of tools and supplies daily and like riding a Rollercoaster when hitting bumps. Now, i hit bumps on purpose just to feel these RoadMasters work their magic! Love them!
by: William03/20/2020
I found this items cheaper on another site but etrailer match and then beat the price.
Item installed super easy, more work jacking up the truck and taking the tires off. Can be installed with out removing tires just make it easier to get it in. The item did lift the back of my truck 1 inch. See Pics.
by: Jim S.05/04/2022
I read a lot of reviews before buying the Roadmaster Active Suspension system and was happy with what I read. I live in BC Canada and ordered the product at 01:30am April 27th 2022 and it arrived in perfect condition May 3rd. I was expecting to pay duty but there was non. Very happy with the fast informative service from etrailer. I could follow the item through transit updates as it was being shipped.
I have a 2020 Ford F-150 King Ranch with the 6' box. We're getting a 29' travel trailer, 5,000 lbs, this summer so I wanted to be prepared, at least regarding the suspension.
I installed the system the day it arrived. I took the wheels off for easy access which was pretty easy. The suspension has to be hanging free for the proper install. The system install was extremely easy. The installation instructions are simple and with pictures. Once the system was installed to spec I took it out for a test ride. It actually did make a difference for a smoother ride. It softened out the bumps without the jumping around an empty truck may experience. Not saying my truck was a rough ride to begin with but I did notice a change. Just have to get the trailer to test it out now. I'm already planning to get the Roadmaster Comfort Ride suspension kit for my new trailer so I should have a smooth riding system.
by: David01/29/2021
Roadmaster active suspension seems to be built very well. I look forward to towing my travel trailer very soon to see if it improves the towing experience.
by: Teal Flamingo04/04/2024
Initial install is super easy. This is waaaaaay better than airbags. No airlines, no worries about a compressor, no worries period. No difference in ride change, although the backend went up about an inch or a little better. Will send review in a year or so to let you know progress!
by: Trebonz04/11/2024
Sure beats air bags or blocks! My Gmc canyon diesel is a great puller, needed help with suspension hauling load limit. Easy to install and works great. On high setting it raised the truck rear an inch or two even empty but the way gmc set up the suspension I consider it a good thing.With my tandem axle 16' trailer loaded it's a saving grace.
by: Daryl06/12/2023
love the the ride without camper easy to install cant wait to put the 3163 lbs camper back on need tires first
by: Isaiah09/15/2022
Wait what?!
Should’ve put these on first thing when I got the truck. Raised the rear a little over an inch, unloaded ride improves, and now tows level! No messing with air hoses, or pumping them up, just install and Tighten! Reminds me of accumulators on hydraulic setups, brilliant idea
2018 F150, 6.5’ bed, 3.5L EcoBoost
by: Dana 03/15/2024
Can't say enough good about the RAS, put it on my Silverado 2500HD with a Spacekap Diablo on back, the RAS brought the ride back to same as stock. Even with a top heavy load there is no more sway than stock and it brought the ride height back to stock. Love the RAS.
25
720
Show More Reviews
See what our Experts say about this RAS Vehicle Suspension
- Recommended RoadActive Suspension For 2019 Ford Transit T350I would be happy to help! The 2000lb rating of the RoadActive Suspension # RAS3623-GT or 3000lb rating of the Heavy Duty Version # RAS3623-HD refers to the amount of support that each kit will add to your rear suspension. This is not counting the weight of your vehicle, but just weight added like tongue weight of a trailer or weight from heavy cargo. These kits are unique in the sense that they do not stiffen up your suspension and give you a harsh ride like other styles of suspension...
view full answer...
Info for this part was:
Edited by:
Leah B
Expert Research:
Jameson C
Video Edited:
Chris R
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Noah M
Installed by:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.